The Optical Flow Meter FM-PS2130 is compact, versatile, easy to install and small in installation size. No need to compensate for gaps, sensors with high precision measurement, high repeatability measurement and high positioning accuracy, long stroke and long life.
The flow rate of the medium through the Micro Infrared Flow Switching is large or small, so the number of signals generated is nonlinear. Whether it is a volumetric or a velocity flow meter, as long as the amount and speed of the flowing medium change, nonlinearity exists objectively. The electronic part of the photoelectric flow meter compensates the curve of different conditions of the medium, and the measurement algorithm changes with the change of flow rate and flow rate.
This is detailed working method of hall effect sensor based water flow switch, a turbine wheel embed with magnet is placed on a closed plastic envelop and a Hall effect sensor placed, When the water flows through the pipeline, it makes the turbine wheel to rotate and hence the magnet flux interferes the hall sensor, the rate of interference is depends on the speed of water flow, so the hall effect sensor produce pulse signal output, this pulse output can be calculated as water volume.
Food safe flow meters have been widely used for pharmaceutical, food and other industries. Food safe flow meters mainly have stainless steel turbine flow meter, stainless steel magnetic flow meter, clamp on ultrasonic flow meters and hygiene class hall effect flow sensors. When used for food grade application,the pipe size of hall effect flow meters are usually not over 30 mm.
Meanwhile, comparing with other types,hall effect water flow sensors are one of the cheapest solution. Because stainless steel hall effect flow sensor is expensive, it is firstly recommended to consider food class plastic hall effect flow sensor.
1. product description:
The parking sensor is mainly used to solve a blind area of the large vehicle and the intelligent parking sensor defense system. Passing rear of vehicle the parking sensor, the position and distance of the rear obstacle are fed back on the LCD display. So that the driver can judge the condition of the car more directly to achieve safe driving. The equipment has the advantages of quick reaction, high sensitivity and strong environmental adaptability.
2. Supplied Accessories :
Accessory Quantity Product model Remark
Radar host 1 SINH-590
Sensor 4 28T
Link 2 According to the car model matching
camera 1 AHD AHD720&1080P
LCD display 1 LCD
Product manual 1 SINH parking sensor monitoring system
certificate 1
3. technical parameters:
voltage:DC12-24V;
Power consumption:
1. product description:
The parking sensor is mainly used to solve a blind area of the large vehicle and the intelligent parking sensor defense system. Passing rear of vehicle the parking sensor, the position and distance of the rear obstacle are fed back on the LED display. So that the driver can judge the condition of the car more directly to achieve safe driving. The equipment has the advantages of quick reaction, high sensitivity and strong environmental adaptability.
2. Supplied Accessories :
Accessory Quantity Product model Remark
Radar host 1 SINH-628
Sensor 4 30T
Link 2 According to the car model matching
LED display 1 LED
Product manual 1 SINH parking sensor monitoring system
certificate 1
3. technical parameters:
voltage:DC12-24V;
Power consumption:
1127 Electronic Sensors Suppliers
Short on time? Let Electronic Sensors sellers contact you.
AR5750B Refrigerant/SF6 Gas Leak Detector Description
This rechargeable refrigerant gas detector respond to all halogenated refrigerant, but also apply to:
A. This was response to all halogenated refrigerant (including chlorine and fluoride). Including but not only limited to below:
CFCs e.g. R12, R11, R500, R503 etc...
HCFCs e.g. R22, R123, R124, R502 etc...
HFCs e.g. R134a, R404a, R125 etc...
Also can detect compound gas for example AZ-50, HP62, Mp39, etc...
B. Detect gas leaks in hospital equipments.
C. SF6 gas was detected in high voltage circuit shot cut..
D. Detect halogen gas when gas mixing with, chlorine, fluorine, bromine.
E. Detect carbon tetrachloride from the dry cleaning machine.
F. Detect the halon gas from the fire extinguisher.
AR5750B Refrigerant/SF6 Gas Leak Detector Specifications
* Detect item: All halogen gas
* Sensitivity: Halogen refrigerant gas 3gr / yr
* Response time: Instantaneous
* Warm up time: < 6 second
* Continuous operation time: 5 hours(slightly vary with operation)
* Operation temperature: 0 to 52C( 0 to 110F)
* Power supply: 2000mAh, 3.7V lithium rechargeable battery
innoCon 6800C controller is specially designed for water treatment and industrial process control. Used with innoSens 310/330 sensor, it can measure the conductivity,resistivity,TDS and temperature of the sample water. It features automatic temperature compensation and has various mounting methods. 4-20mA/RS485 and multiple control function outputs are a standard feature.
Waterproof Meat Probe Thermistor Temperature Sensor 3.3K For Stove Oven Grill Baker
I Description Of Thermistor Temperature Sensor
A meat thermometer is a unit which will measure core temperature of meats while cooking.It will have a metal probe with a sharp point which is pushed into the meat. It should be connected by a flexible heat-resistant silicone cable to oven control board & display.
Some brand models have programmed for auto cooking with the meat probe.
5.8GHz C-band microwave.
Input voltage: 12 - 24V DC .
Input current: 30mA.
*0~10V / PWM output signal.
Super compact size(o50 only), easy and small enough to be used built-in.
Specially designed for UFO highbay fixtures, shoeboxes, wallpacks, simple plug and play.
If the lighting fixture manufacturers / contactors do not want the sensor function, they just need to easily remove the sensor head and put the cover cap on, the fixture becomes standard non-sensor control fixture.
Intelligent photocell to measure and differentiate natural light from LED light even when used built-in.
Memory function with one button commissioning, easy operation and user friendly.
IR remote commissioning, easy setting and user friendly.
Detection range up to max. 16~18m in diameter.
Mounting height: max.12m.
Operation temperature: -20 c ~ + 70 c.
RoHS compliant.
IP rating: IP65.
Place of Origin: Sichuan, China (Mainland)
Brand Name: SAND
Model Number: PT3xx6 Series
Pressure Range: 0~150MPa (20000psi)
Accuracy: ±1.0% FS
Power: 10V DC (6~12V DC)
Signal Output: 3.33mV/V (Full 33.3mV) or 3.0mV/V (Full 30mV)
Probe Temperature: 535
Product Introduction:
PT3xx6 Series Melt Pressure Transducer(Melt Pressure Sensor). This series are used a special material and pressure transmission which can bear as high as 535 °C measuring medium to replace the traditional 400 °C. this technology is created by our company only in home.
Performance Parameters:
Pressure Range: 0 ~ 5 MPA~ 150 MPA ( 0 ~ 750psi ~ 20000psi );
Accuracy: ±0.5% FS;
Power: 10VDC ( 6 ~ 12 V DC );
Output Signal: 3.33mV/V (Default), 3.0mV/V(Optional) etc.
Probe Heat Resistance:
PT4516 Series: 300°C;
PT4616 and PT4626 Series: 400°C;
Temperature Drift: =500M/500VDC;
Mechanical Connections: 1/2"-20UNF, M10x1.5, M12x1.5, M14x1.5, M18x1.5, M22x1.5 etc. (Optional)
Electrical Connections: 6PIN (SD02106P/SD02106S);
Thermometric Config:
Thermocouple: E, J, K, S type etc.; (PT4626 Series Optional);
Thermal Resistance: Pt100 etc. (PT4626 Series Optional);
Features:
* Anticorrosive wear-resisting coating: apply to high concentrations of rough media pressure measurement,
can improve the service life of 3 to 5 times (optional);
* Special requirement can make to order, delivery date 7 ~ 15 working days;
* Optional supporting intelligent digital pressure meter:
PS1016-43x series, PS4810-43x series, PS4812-43x series and PS9016-43x series.
Order Format:
Example1:
PT3816-350bar-M18-150/470-3.33mV/V
Note:
Product design Model "PT3816".
Function code "Null" stands for melt pressure transducer.
Coating code "Null" stands for without coating .
Pressure range: 0 ~ 350bar.
D203S is the hot selling item in the market. Mostly used for light control lamp switch, general detection angle.
PIR (Passive Infrared Detector) are used to detect motion object like human movement. All the PIR sensor must work with Fresnel Lens, this version can detetc more than 8 meters.
2. Product Overview
HPD05 PM2.5 Sensor Module use principle of optical scattering to measure concentration of dust inthe air,the module built in a Infrared Transmitter and a high sensitive Photoelectric Receiving Sensor the Infrared Transmitter emits light and the light meets the dust to produce the scotch light, theintensity of the scotch light detected by Photoelectric Receiving Sensor reflects the concentration ofdust in the air, HPD05 have two ways to output current concentration data, one is PWM signal (thewidth of signal is the value, 1ms = 1ug/m3), the other is IIC signal(unit is ug/m3).
HPD05 can be used for Air Cleaner, Air Conditioner with purifying function, Fresh Air System and air quality testing equipment.
3. Detecting Principle
Detecting Principle
Per the principle of optical scattering,the Transmitter emits light, and the light meets the dust to produce the scotch light, the high sensitive Photoelectric Receiving Sensor detects the intensity of the scotch light then output intensity signal, current which is proportional to the size and quality of intensity of the scotch light, the current is amplified by amplifier and calibrated by CPU, finally output digital PWM signal or IIC data of concentration of dust.
4. Performance Parameter
1 Characteristics
Characteristics
Connector CON2 Pin Description
Connector CON2 Pin Description
2 Life
Life of Light Source: above 5 years with continuous power on.
3 Photoelectricity Characteristics
Photoelectricity Characteristics
4 Signal Output
a1. PWM signal output(Corresponding Model HPD051Axxx):
Signal Output
The relation of Low Pulse Time and Dust Concentration: 1ms = 1ug/m3
The pulse width outputted by P1 pin is the average value of Dust Concentration(Lower responding speed, small fluctuation & good stability)
Product Description
soil moisture and soil temperature sensor to facilitate soil moisture and soil temperature measurement. The product has high precision, fast response and stable output. It is less affected by soil salinity and is suitable for various soil types. It can be buried in the soil for a long time, resistant to long-term electrolysis, corrosion resistance, vacuum potting, waterproof and rust proof.
Soil Moisture Sensor Technical Parameters
RS-FS- * wind speed sensor, compact and lightweight, easy to carry and assemble, design cups can be efficiently obtain information about the wind speed, high-quality aluminum alloy housing, external spray plating process, has good anti-corrosion, anti- erosion and other characteristics, to ensure the long-term use of non-rust transmitter cut phenomenon, in conjunction with smooth internal bearing system to ensure the accuracy of the information collection, and traditional analog signals (4-20mA, 0-10V, 0- 5V) for data output. Is widely used in greenhouse, environmental protection, weather stations, ships, docks, breeding and other environmental wind speed measurement.
Description of Industrial Thermocouple RTD PT100 Temperature Sensor with 1/4" Thread
Product Name :Thermocouple
Type :PT100
Temperature Range :0�°C-150�°C
Probe Size : 0.5 x 10cm / 0.2" x 3.9" (D*L)
Thread Diameter: 8mm/ 0.31"
External Material Plastic, Metal, Rubber
Total Length 1M / 39.4"(we can customize other length)
Fork Terminal Spacing 0.5cm
