Low consumption rates HP Graphite Electrode DESCRIPTION HP Graphite Electrode is used for the recycling of steel in the High Power Electrical Arc Furnace. Its main ingredient is high-value needle coke which is made from either petroleum or coal tar. Model Number:SY-HP300 Application:EAF/LF Grade:HP(high power) Material: Petroleum Coke/Needle Coke/Coal pitch Color:Black/Grey HP Graphite Electrode FEATURES Low electrical resistance Low consumption rates Highly purity and bulk density
UHP Graphite Electrode DESCRIPTION Designed primarily for use in electric arc furnaces and ladle furnaces, our UHP graphite electrodes aremade of premium needle cokes in a process that includes strict grading, mixing, molding, double baking,high pressure impregnating and fine-matching. Model Number:SY-UHP500 Application:EAF/LF Grade:UHP(Ultra-high power) Length:1600/1800/2000/2400/2700/3000mm Resistance((�¼�©.m): 5.5 Bulk Density(g/cm³ ): 1.66 Flexure Strength (, MPa): 11 Elastic Modulus (, GPa): 14 Ash Content (, %): 0.3 CTE(, 10-6/°C): 1.4
E3 3/32 TIG WELDING TUNGSTEN ELECTRODES REPLACES 2% TUNGSTEN E3 1/8 TIG WELDING TUNGSTEN ELECTRODES REPLACES 2% TUNGSTEN E3 1/16 TIG WELDING TUNGSTEN ELECTRODES REPLACES WT20 E3 Tungsten Electrodes deliver superior arc starting, electrode lifetime, and overall cost effectiveness. Users of 2% thoriated tungsten can switch to E3 tungsten with confidence. E3 requires fewer re-grinds and provides longer overall lifetime when compared to 2% thoriated. E3 tungsten can be used on DC electrode positive or negative with a pointed end, or balled for use with AC power sources. Featues over Thoriated Tungsten Lower operating temperature Fewer re-grinds Improved arc starting Versatile use Size: 1.2mmx175mm 2.0mmx175mm 2.4mmx175mm 3.0mmx175mm 3.2mmx175mm 4.0mmx175mm 5.0mmx175mm 1.2mmx150mm 2.0mmx150mm 2.4mmx150mm 3.0mmx150mm 3.2mmx150mm 4.0mmx150mm 5.0mmx150mm Black rod * 2.0mmx450mm * 2.4mmx450mm * 3.0mmx450mm * 3.2mmx450mm * 4.0mmx450mm * 5.0mmx450mm * 6.0mmx450mm * 8.0mmx450mm Polished * 800-1000mm in length
Handan Guotai Carbon Group, which supplies 300-700 ultra-high graphite electrodes, graphite crucibles, graphite blocks and graphite special-shaped parts, welcomes elites from all over the world to visit our factory in China to bring you satisfactory service, quality first, customer first, integrate resources, provide high-quality products, cooperate with customers and seek common development.
UHP Graphite Electrodes manufacturer our UHP Graphite Electrodes are widely used in Electric Arc Furnace and Ladle furnace for making alloy steel or other metals and nonferrous metal. Our main exporting size of Metallurgical Graphite Electrodes are: (Dia. 75-Dia. 700mm) Our Graphite Electrodes manufacturer has the following feature: 1. Lower electric resistivity, good electric and heat conductivity; 2. High mechanical strength under high temperature; 3. High resistance to thermal shock and mechanical vibration; 4. Lower ash content; 5. According to the customer's feedback information, our electrodes used in EAF/LF with the pretty lower consumption per ton steel. Graphite electrodes including RP, RPI, HP Graphite Electrodes, SHP Graphite Electrodes and UHP are widely used in Electric Arc Furnace and Ladle furnace for making alloy steel or other metals and nonferrous metal. If you want to get more information, welcome to contact us!
SHP Graphite Electrodes our SHP Graphite Electrodes are widely used in Electric Arc Furnace and Ladle furnace for making alloy steel or other metals and nonferrous metal. Our main exporting size of Graphite Electrodes Solutions are: (Dia. 75-Dia. 700mm) Our Graphite Electrodes manufacturer has the following feature: 1. Lower electric resistivity, good electric and heat conductivity; 2. High mechanical strength under high temperature; 3. High resistance to thermal shock and mechanical vibration; 4. Lower ash content; 5. According to the customer's feedback information, our electrodes used in EAF/LF with the pretty lower consumption per ton steel. Graphite electrodes including RP, RPI, HP Graphite Electrodes, SHP Graphite Electrodes and UHP are widely used in Electric Arc Furnace and Ladle furnace for making alloy steel or other metals and nonferrous metal. If you want to get more information, welcome to contact us!
RP Graphite Electrodes our RP Graphite Electrodes are widely used in Electric Arc Furnace and Ladle furnace for making alloy steel or other metals and nonferrous metal. Our main exporting size of Graphite Electrodes Solutions are: (Dia. 75-Dia. 700mm) Our RP Graphite Electrodes manufacturer has the following feature: 1. Lower electric resistivity, good electric and heat conductivity; 2. High mechanical strength under high temperature; 3. High resistance to thermal shock and mechanical vibration; 4. Lower ash content; 5. According to the customer's feedback information, our electrodes used in EAF/LF with the pretty lower consumption per ton steel. Graphite electrodes including RP, RPI, HP Graphite Electrodes, SHP Graphite Electrodes and UHP are widely used in Electric Arc Furnace and Ladle furnace for making alloy steel or other metals and nonferrous metal. If you want to get more information, welcome to contact us!
Graphite electrodes including RP Graphite Electrodes, RPI, HP, SHP and UHP Graphite Electrodes are widely used in Electric Arc Furnace and Ladle furnace for making alloy steel or other metals and nonferrous metal. Our main exporting size of Graphite Electrodes Solutions are: (Dia. 75-Dia. 700mm) Our Ladle furnace Graphite Electrodes has the following feature: 1. Lower electric resistivity, good electric and heat conductivity; 2. High mechanical strength under high temperature; 3. High resistance to thermal shock and mechanical vibration; 4. Lower ash content; 5. According to the customer's feedback information, our electrodes used in EAF/LF with the pretty lower consumption per ton steel. We main supply electric arc furnace graphite electrodes, direct current furnaces electrodes. look forward to working with you for a long time!
Tungsten Electrode, WT20, Thoriated, Dia: 1.0-10.0 Length: 150/175/178 Packet: 10 pcs Inner box: 10 packets Outter carton: 100 packets
Outstanding electrical conductivity Low consumption rates Anti-oxidation Highly flexible strength and Bending Strength APPLICATION Graphite electrode are used primarily in electric arc furnace steel manufacturing. It can provide high levels of electrical conductivity and capability of sustaining the extremely high levels of generated heat, and also used in the refinement of steel and similar smelting processes. DC electric arc furnace AC electric arc furnace Submerged arc furnace Ladle furnace
EAF graphite electrode Length:1600/1800/2000/2400/2700/3000mm Low electrical resistance HP Graphite Electrode APPLICATION HP Graphite Electrode are used in EAF and LF for steel making, as well as in electric smelting furnace for producing industrial silicon, phosphorus, etc. DC electric arc furnace AC electric arc furnace Submerged arc furnace Ladle furnace
The electrodes are packed in wooden boxes and wooden frame bottoms, and the joint holes are protected by a foam cover and bundled with a packing steel strip. The electrode joints are packed in cartons, foam boxes or packed in large wooden boxes and bundled with baled steel strips. When more than two electrode joints are installed in the same carton, the joints are separated by corrugated paper or foam plastic sheets. When the electrode and the joint are integrally connected, the electrode joint hole and the joint are packaged with a foam cover, and then wrapped in a wooden box and a wooden frame, andBundled with baled steel strips. UHP graphite electrode Manufacturer has advanced production equipment, complete facilities, advanced testing methods and professional team. Always put quality in the first place, from material selection to final machining, each process is strictly and quality-tested and controlled, and carefully create high-quality graphite products for customers.
We are manufacturing high quality welding electrodes with unmatched quality..our brand name is BEST and as per ISI standards...which is radiographic electrode
We are manufacturing high quality welding electrodes with unmatched quality..our brand name is BEST and as per ISI standards...which is radiographic electrode
We are manufacturing high quality welding electrodes with unmatched quality..our brand name is BEST and as per ISI standards...which is radiographic electrode
The blue lanthanated electrodes are popular due to the relative ease of striking an arc and lower amperage required. They perform exceptionally well in both AC & DC applications, and are a popular general use electrode. Blue electrodes are effective for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and non-corroding steels.
Grey ceriated electrodes are popular due to their extreme ease of striking an arc with lower amperages, and their extraordinary performance with regard to DC welding applications. They perform best with titanium alloys, copper alloys, magnesium alloys, aluminum alloys, nickel alloys, non-corroding steels, and low-alloyed steels. WC20 Welding cerium Tungsten Electrode Cerium-tungsten electrode is a non-radiative and green products .It has good starting arc performance under the condition of low current .It is known to be especially good for direct current welding with low amperage because it starts very easily at low amps .Therefore it is very popular to be used for the welding of pipeline ,fine parts, short welding cycles and given number welding .
The gold lanthanated tungsten electrodes contain less lanthanum than their blue counterparts and are best used in DC applications. They are best for welds with titanium alloys, copper alloys, nickel alloys, and non-corroding steel.
The red thoriated type is Americas favorite electrode for a reason. Extremely long lasting and highly durable, these electrodes are a staple in DC welding applications. These red electrodes are best for copper alloys, nickel alloys, titanium alloys, and non-corroding steels. WT Thorium- Tungsten Electrode It is widely used as an additive oxide electrode ,having much more advanced comprehensive welding performance than the properties of Pure Tungsten Electrode and other additive oxide electrodes. It can not be replaced by other oxide electrodes during the long use process. It can be operated easily and current load is high .It can produce arc easily and steadily ,and the gap of the? breaking arc is big ,loss less and long life .It has much higher recrystallizing temperature, much better conductivity and better mechanical cutting property .It is used for welding carbon steel, stainless steel, nickel alloy and titanium metal. It is the first selection material for high quality welding.
HP Size and Tolerance Diameter (mm) Length (mm) Nominal diameter Actual diameter Nominal length Tolerance Short feet length mm inch max min mm mm max min 200 8 209 203 1600/1800/ 2000/2200/ 2400/2700 ±100 -100 -275 250 10 258 252 300 12 307 302 350 14 357 352 400 16 409 403 450 18 460 454 500 20 511 505 550 22 556 553 600 24 613 607 Physical and Chemical Index of HP Items unit Diameter: 250-600mm Standard Test data Electrode Nipple Electrode Nipple Electrical resistance μΩm 6.5-7.5 6.0 6.0-7.0 5.5 Flexure strength Mpa 9.8-10.5 14 12-15 15-18 Modulus of elasticity GPa 12 16 12 14 Ash content % 0.2 0.2 0.2 0.2 Apparent density g/cm3 1.6 1.7 1.68-1.73 1.75 Factor of expansion(100-600) x10-6/ 2.4 2.2 2.2 2.0 Operating instruction 1. Use special hoist tools to hoist graphite electrode. It is strictly forbad to prize electrode ends up with crowbar. It must be handled with great care during transport to avoid being struck. 2. Graphite electrode must be kept away from being moistened or wetted by rain, snow and water, and must be kept dry. 3. Carefully checking before making connection, make sure that socket and nipple thread is not damaged, nipple pitch plug is in. 4. Blow the nipple and socket threads with compressed air. 5. It must be dried in the furnace before use, the drying temperature in the furnace should be less than 150,the drying period should be more 30 hours 6. Graphite electrode must be connected and contacted closely and straightly.Use moment spanner for connecting electrode with suitable force. Mustnt decline. 7. The holding device must hold the electrode tightly, good contact and no arc. 8. To avoid the electrode breakage, put the large materials in lower part and small materials in the upper part. Insulating materials should not be put into the furnace. The working current of electrode must be conformity with the allowable current of electrode in the instructions.
