Contactor & Relay, Dol Starters, Capacitors, MCB, RCCB, MCCB MPCB, SFU & HRC Fuse Changeover Switch. Cable & Wires, Lugs & Gland, Rotry & Limit-Switches,Meters, Proximity & Senso, Panel Accessories.
Features Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching Application Optical Signal Switching and Routing Optical Network Protection and Restoration Optical Network Monitoring Video Distribution Instrumentation Resource Sharing Military Communications
1x2 solid-state fiber optical switch The 1x2 solid state fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configuration s and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all solid sate 1x2 fiber optic switch features low insertion loss,high extinction ratio,high channel isolation,and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure,longevity,operation under shock/vibration environment and large temperature variations,and fast response time.The switch also has build-in circulator and isolator functions. Electronic driver is available for this series of switches. Features Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching Application Optical Signal Switching and Routing Optical Network Protection and Restoration Optical Network Monitoring Video Distribution Instrumentation Resource Sharing Military Communications
Features Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching lectrical Driving Information The switch is actuated by applying a voltage pulse. Applying one polarity pulse, one light path will be connected and latched to the position. Applying a reversed polarity pulse, another light path will be connected and latched to the position after pulse removed.
1.Work Humidiy:
SN501NB HDMI Amplifier Switcher routes high definition video (in multiple resolutions up to 4K*2k) and digital audio from any one of the 5 sources to display units.Input / output 10m @3840X2160 HDMI extend . r
SN301NB HDMI Amplifier Switcher routes high definition video (in multiple resolutions up to 4K*2k) and digital audio from any one of the 3 sources to display units. Input / output 10m @3840X2160 HDMI extend ;3 HDMI ports MHL function;Charging out function
The 4x1 HDMI Switcher 1.4V with ARC, HEC, 3D and High Fidelity function can connect multi HD Sources with one HD display end. It can switch any one of the four HD Sources to one HD Display or HD Projector very easily. Also the signal can support extra audio out by the optical cable. Without adding one extra HDMI Cable, it can reverse the audio to the AV Amplifier by HDMI Cable connection with HD TV while the HD TV receives the audio and video content. It allows the other HDMI Devices based the Ethernet and other HDMI devices enjoy the Ethernet function, so that you do not need to add one extra Ethernet cable Input: 4 HDMI A-Type Output: 1 HDMI A-Type Support: CEC 1080P Support 3D Product description: HDMI 4x1 Switcher V1.4 Support 4K UHD 3D-|-SN401AV14
The 4x1 HDMI Switcher supports PIP,4K and 3D can do connect four HD Sources to one HD Display. It can easily switch any one of the input four HD Sources to one HD display. It supports PIP function, and it can do switch or choose the input sources by checking the small picture window from the PIP. Input: 4 HDMI A-Type Output: 1 HDMI A-Type+1SPDIF+L/R Support: CEC 4K*2K 3D Support HDMI1.4b
This is a high performance three HDMI input and one HDMI output switcher . The system supports all 3D TV formats in addition to all HDTV formats up to 4Kx2K. Furthermore, the remote control gives uses to complete control over the selection of sources and makes the device incredibly user friendly.
The 3x1 HDMI Switcher allows access to multiple HDMI sources, using a single HDMI sink. The Switcher allows three HDMI devices to be switched easily through one HDMI compatible monitor or projector. The Switcher can also be placed at the end of a long HDMI cable to regenerate the HDMI signal. Inputs: 3 HDMI Outputs: 1 HDMI Support: 3D CEC HDCP 1.2 Dimension: 115X61X26 (mm)
This is one device of HDMI 2 ports bi-direction manual switcher. It can easily switch two routes of HD Source to any one HD display or projector. Also it can distribute one HD Source to two HD Display or projector. Input: 1or 2 HDMI A-Type Output: 2 or 1 HDMI A-Type Support: CEC 1080P Support 3D Product description: 2 HDMI-Host (DVD Player or PS3) to 1 HDMI Monitor or TV 1 HDMI-Host (DVD Player or PS3) to 2 HDMI Monitor or TV
1.WORK HUMIDIY:
Application:KSD301 series thermostat applications ? sterilizer, ? dishwasher, ? dryer, ? microwave, ? drinking fountains, ? electric kettle, ? office equipment, ? coffee maker, ? sandwich toaster, ? car seat heaters, automobile antifreeze, electric cooker, refrigerator, air conditioner, laminator and other electric appliances. The Product Sells Point: Key Specifications/Special Features: KSD301 series thermostat technical parameters ? electrical parameters: 1) CQC, VDE, UL, CUL AC250V 50 ~ 60Hz 5A / 10A / 15A (resistive load) 2) UL AC125V 50Hz 15A (resistive load) ? operating temperature range: 0-300 ? (optional), temperature accuracy: ± 2 ± 3 ± 5 ± 10 ? ? reply and action temperature difference: 8 ~ 100 ? (optional) ? Connection: plug terminals 250 # (bend 0 ~ 90 ° optional); plug terminals 187 # (bend 0 ~ 90 ° optional thickness 0.5,0.8mm optional) ? life: = 100,000 times ? electrical strength: AC 50Hz 1800V lasted 1min, no flicker, no breakdown ? contact resistance: =50mO ? Insulation resistance: =100MO ? Contact form: Normally closed type: temperature rise, contacts open, the temperature drops, contact connected; Normally open type: temperature rise, contact connected, the temperature drops, the contact is open ? shell protection grade: IP00 Installation: KSD301 Series Installation ordinary activities ring, ring install small round activities, installation of flat panel active ring, ordinary large aluminum cover with mounting holes, with mounting holes lengthened aluminum cover. KSD301 series thermostat competitive advantage ? stable performance ? high precision ? small size, light weight ? high reliability, long life ? dry worries small radio ? no arc KSD301 series thermostat Notice ? grounding: The thermostat metal cover metal parts connected to the equipment grounding. ? when using contact temperature installation should be charged with snapping the metal to cover up the installation of surface equipment, to ensure that the temperature effect, should be coated with thermal grease or other properties like heat transfer medium in surface temperature. ? not install when the top cover surface collapsed, loose or deformed, so as not to affect performance. ? not allow liquid to penetrate the internal temperature, not cause the shell cracks, not free to change the shape of the external terminals. ? product in less than 5A current of the circuit used, should be selected cross-section of 0.5 5-1?2 copper wires; not more than 10A current in the circuit, chose the copper wires cross-section 0.75-1.5?2 . ? product should be less than 90% relative humidity, ambient temperature below 40 ? ventilated, clean, dry, non-corrosive gases stored in the warehouse. ? use can not bend the terminals, otherwise it will affect the reliability of the electrical connections.
Application:, Uses: Widely used in electric irons, electric oven, frying pan, warm milk, heat-wave oven, electronic oven, electric pressure cookers, rice cookers, electric heaters, hotplates, ovens and other heating products, thermostat and temperature limiter functions. The Product Sells Point: Key Specifications/Special Features: Technical parameters: 1. Electrical parameters: 16A 250V ~; 16A 125V ~; 2. Operating temperature range: 0 ? ~ 250 ? optional; 3. Electric strength: 2000V ~ 1min no breakdown, reliable product action altogether, do not pull the arc, long life, small radio interference, temperature control accurate; 4. Contact resistance: =50mO; 5. Insulation resistance: =5MO; 6. Leakage current: =0.25mA; 7. Rotate the shaft: torque 1.5N · m above the initial value of the test temperature within ± 1 ?; 7. Life: 100,000 cycles; 8. Thermostat axis rotation angle: 0 ° to 310 ° optional; 9. Terminals: based on actual customer demand and 4.8 * 6.3 * 0.8 0.8 GB terminals such as compliance with the selection. 10. There UL.CUL, VDE, CE, TUV, CEMC, ROHS certification Description: 1. Disconnect the thermostat and the temperature characteristic curve according to customer test match finished with a temperature dependent; 2. This product is designed with the induced current and temperature control to achieve the purpose of, and can greatly reduce the temperature increase, remote temperature control, thermal compensation; 3. Installation can be designed according to customer requirements; 4. For the convenience of customers to install thermostat, thermostat while also staking a fixed mounting block (piece), but also has the function of heat conduction effect. Note: Ceramics, bimetal thermostats, and other physical conditions of external forces should not be kept as 1. install; 2. Storage in strict accordance with the thermostat stacking layers do affect product quality requirements and details such as dust and moisture; 2. If customers need to adjust the temperature setpoint thermostat controller tuning screw screw inside the counterclockwise rotation, temperature setpoint increases, whereas reduced.
Application:Application Field : Be used in Battery packs, Pumps,Cooling fans, Heating appliance, Lighting ballast The Product Sells Point: Key Specifications/Special Features: The Product Sells Point : Miniature size; Positive make and break with snap -action disc; Suitable for most impregnation processes; Competitive price Key Specifications/Special Features : 1.Dimension case: with leading wire 60mm normally Plastic:16x5.2x3mm 2.Rated voltage: AC250V/24V (50/60Hz) 3.Rated current: 6A 4.Rated open temperature range: 40~145?, in steps of 5? 5.Tolerance: (+/-)5? 6.Resetting temperature : lower than rated open temperature 30?(+/-)15? 7.Switching cycles in: 10,000 cycles 8.Contact arrangement:Normally closed&Normally open 9.Standard contact resistance:=50mO AGENCY FILE NUMBER STANDARD NUMBER APPLICATION UL E305764 873 Motor protection VDE 40016121 EN60730-2-2 Motor protection TUV R50109800 EN60730-2-3 Lighting Protection TUV R50110965 EN60730-2-9 Thermal cut-out CB CN5785 IEN60730-2-2 Motor protection CQC CQC05002013372 GB14536.1 GB14536.3 Motor protection Limit and regulating controls
Application:Widely used in: welding machine, washing machines, air conditioners, refrigerators, furniture, thermostats, electric hot water bottle, electric kettles, electric heaters, electric ovens, water heaters, water dispenser, microwave, sterilizer, electric pressure cookers, rice cookers and other industrial and household appliances temperature control products. The Product Sells Point: Key Specifications/Special Features: The company produces mainly thermostat KSD series of sudden jump bimetallic thermostat, Especially in high-power thermostat-oriented products, in this regard there is a lot of experience and a strong research and development capabilities of the company's,, stable temperature performance, high precision, carrying current, synchronous product good. Key raw materials from abroad, with the United States Emerson comparable products. Is currently the only one made by the 60A current CE, TUV, UL, CUL and CQC safety certification. The company produces thermostat varieties, the current from 5A-60A, the voltage from 110V-400V. Existing home but also for industrial use. Technical parameters: AC250V, 400V 15A-60A Temperature range: -20 ? -180 ? Reset Type: Manual reset Safety Certification: TUV CQC UL CUL S ETL performance and the principle of high current thermostat KSD30R series thermostat, with the shell closed bimetal contact temperature temperature relay, thermal expansion and contraction principles of sheet metal bent to reach the set temperature, the disconnect can be manually reset after the temperature drops, appliances from the security role. Large current thermostat product specifications (1) functions: temperature protection and thermal protection, anti-dry (2) Electrical Characteristics: AC125V ~ the 250V/15A ~ 30A ~40A ~50A ~60A ? maximum ambient temperature: 180 ° C (4) Operating temperature range: 0 ° C to 180 ° C (optional). Temperature tolerance: ± 5 ? normal insulation resistance:> 100MO ? normal contact resistance: = 100mO ? service life:> 10,000 high current thermostat Note (1) using the contact temperature installation, the metal cover up snapping charged with the mounting surface of the apparatus. ? installation can not cover up the pressure deformation, so as not to affect performance. (3) To prevent leakage, the use can not allow the liquid to penetrate inside the thermostat, so as not to affect the electrical reliability. ? this product for bipolar wiring method, when used in accordance with the marker, the correct wiring. ? products should be less than 90% relative humidity, ambient temperature below 40 ?, ventilation, clean, dry, non-corrosive gases warehouse store.
Rubber Metal Isolators is used as anti vibration mount to isolate vibration and absorb noise in an object that has moving parts such as light and heavy equipments and vehicles. Why Partner with Us? As a dedicated manufacturer of custom Rubber Metal Isolators and rubber-to-metal components, we are committed to meeting the highest industry standards and exceeding customer expectations. 1. Expertise in Custom Solutions With years of experience, we understand the specific requirements of different industries and provide tailored solutions for every application. 2. Quality Assurance Our rigorous testing procedures and attention to detail ensure the durability and reliability of every product we produce. 3. Competitive Pricing As a factory-direct manufacturer, we offer competitive pricing without compromising on quality. 4. Responsive Support Our team is always available to assist you, from the initial inquiry to post-sale support. Contact Us for a Custom Solution Ready to enhance your operations with precision-engineered Rubber Metal Isolators? Contact us today to discuss your specific requirements and receive a competitive quote. Let us help you achieve operational excellence with our high-quality, custom-designed Rubber Metal Isolators.
Part No : 1805
Static Pass Box Manufacturers in Ahmedabad Static pass boxes are used to transfer materials between two rooms of equal cleanliness levels and are designed for minimal personnel movement while dynamic pass boxes are used to transfer materials from uncontrolled to controlled environments. Our Pass Boxes follow global and of highest design standards, giving you the option of the type of pass box depending on the containment level and transfer of material from one cleanroom to the other. We also supply them for flame-proof areas. Cabinet Fabricated in SS 304/316 Static Pass Box SS 304 Hinges and Door Handle Doubled Skin Cabinet with Doors and Toughed Glass Electro Magnetic Interlocking System Feather Touch controller for Door/Light/Hour Meter for UV Pre-Installed White and UV Germicidal Light Sound Level Minimum 65db Power Supply Single Phase 220V 50 Hz Static Pass Box Functioning: It has two doors at its extreme. The doors are provided with a glass window so that the material kept for transfer can be seen. One door opens in the cleanroom and the other door opens in the other room. The doors are electrically interlocked type, hence only one door can be opened at a time. It prevents the direct flow of air from the cleanroom to the other room and vice-versa. It helps to achieving the objective of material transfer without compromising the cleanliness level of the cleanroom.
