UV Sensor "UV-Arc" water proof UV sensor with G3/4" thread for pantograph arc detection Properties of Waterproof UV Sensor UV-Arc The UV-Arc is a waterproof sensor with a male threaded body (G3/4") to be used on trains to measure intensity and length of pantograph arcs according to EN 50317. This indicates the quality of the contact between a pantograph and the contact wire and allow a location of defects at the wire within a rail network. The UV-Arc sensor is configured for this special application. It contains a very sensitive photodiode with an additional filter to suppress solar UVB sensitivity. The time constant is adjusted to the typical arc lengths and the metal housing provides high EMC safety. UV-Arc Waterproof UV Sensor Specifications * Temperature Coefficient (30 to 65'C): 0.05 to 0.075%/K * Operating Temperature: -20 to +80'C * Storage Temperature: -40 to +80'C * Humidity: < 80%, non condensing * Spectral Sensitivity: UVC+ * Measuring Range: up to 400 W/cm2 * Signal Output: 0 to 5 V or 4 to 20 mA
S509 IR CO2 Gas Sensor Characteristics: * -40'C~+70'C wide working temperature range high precision measurement * Sensor automatic revision, zero drift an automatic adjustment * Immune to poisonous and harmful material, have fight poisoning efficacy * Work without oxygen to participate in * Using the infrared principle scattered, and long service life * Sensor work, can output the digital quantity and analog * Has the standard output interface, peripheral use circuit is simple Infrared gas sensor is based on bill-LangBo law and ir theory developed, we can accurately detect methane, carbon dioxide, hydrocarbons, etc. Sensor interior has intelligent processing chip, the gas absorption of light signal conversion into gas concentration information, and digital signal and linear output voltage signal and through the software algorithm in complex linearization and precise processing temperature and humidity compensation of gas density per second, and a time interval according to certain packet format automatically send output. When offered 3.0VDC ~ 6.0VDC range voltage, S509 infrared sensor can be in -40'C ~ +70'C Wide temperature range normal work. The sensor to provide analog and digital output interface. The user can through the interface auto receiving gas concentration data and execution, use the function such as calibration is very simple. S509 IR CO2 Gas Sensor Specification * Working voltage: 3.0 - 6.0V * Resolution: 1°FS. * Response timeT90: 30S * Measurement accuracy: ±3%FS * Zero repeatability: ±1%FS * Long-term zero drift: ±1%FS/year * Working temperature: -40'C~+70'C * Working humidity: 0~95%RH No condensation
SO-B0-001 Limiting Current Type Zirconia Oxygen Sensor Operational Principle When voltage is applied to a zirconia electrolyte cell, oxygen is pumped through the zirconia disc from the cathode side to the anode side because the carriers of the current flowing through the zirconia electrolyte are oxygen ions. By attaching a cap with a pinhole on the cathode side of the cell and by increasing the voltage over the cell the current shows saturation due to the rate limiting step in the transfer of oxygen to the cathode. This saturation current is called limiting current and is nearly proportional to the ambient oxygen concentration. Below the advantages of the Zirconia Oxygen Sensor SO-B0-001: * Measuring range 10 ppm to 1000ppm oxygen * High accuracy * For many types a more or less linear characteristic * Small temperature dependence of the sensor signal * Low interference with other gases * Long service life * In many cases "Single point calibration" necessary only once SO-B0-001 Limiting Current Type Zirconia Oxygen Sensor Applications: * Medical * Laboratory * Food industry * Household/Gastronomy * Measuring technique * Security technology/Monitoring * (Electrical-) industry SO-B0-001 Limiting Current Type Zirconia Oxygen Sensor Characteristic Data: * TO8 Housing * Measuring gas: Oxygen concentration * Measuring medium: Gaseous atmosphere * Measuring principle: Limiting current type sensor * Measuring ranges: 10 ppm - 1000 ppm O2 * Output current: 70 A - 140 A * Accuracy: ±20 ppm O2 * Reproducibility:
EDS Series Displacement Sensors Description Our displacement sensor may either be used as a standalone unit or as a part of a system together with other daisy chained sensors. In stand- alone mode the sensor requires 24VDC supply and outputs an analogue current in the range of 4-20mA. The output signal is linearly proportional to the displacement i.e. 4mA corresponds to 0mm and 20mA represents the maximum displacement of the sensor. The flexible nature of the sensors enables off-axis displacements measurements in all three directions. EDS Series Displacement Sensors Specifications * Measurement range: EDS20: 20mm EDS50: 50mm EDS100: 100mm EDS200: 200mm * Power supply: 24V DC * Analogue output: 4 - 20mA * Absolute accuracy: 0.1% Full Scale * Power consumption: < 100mA * Update rate: Up to 10k samples/second * Operating temperature: -20 to 80'C * Operating humidity: 5%RH to 80%RH * Ingress protection: IP63
SH-300-NDC NDIR CO2 Sensor Module Features * Best Extremely Precise Sensor * Quick Response Time * Long Time Use, Stable performance at High & Low Temperature * Waterproof Filter for anti static filters fine dust and humidity in the air * One-way air indraft for represent average value when momentary CO2 Value change in the air * Low Current consumption * Output support: UART, 0~3V Analog SH-300-NDC NDIR CO2 Sensor Module Application * CO2 Control for Indoor Air Quality * CO2 Measuring for Ventilation Control * CO2 Control for Building, Hospital, School * CO2 Control for Air cleaner, Air conditioner. * Mushroom Control, Boiler Control SH-300-NDC NDIR CO2 Sensor Module Technical Specification * Measuring Type: Dual Light Wavelength NDIR * Measuring Range: 0 ~ 3,000 / 5,000 / 10,000 ppm * Accuracy: ±2% FS, ±3 % measured value @0 ~ 50'C * Response Time: Every 2.0 Seconds * Warm-Up Time @ 25'C: < 90sec * Output support: UART, 0~3V Analog * Operating Temperature: -10 ~ 50'C * Operating Humidity: 0 ~ 99.5% RH (Non-Condensing)
Handheld Particle Counter Model P311 The P311 handheld particle counter measures 0.3 m to 5.0 m with a flow rate of 0.1 CFM (2.83 LPM). Only 1.26 lb (0.57 kg), user-friendly and easy to configure, this handheld particle counter displays up to 3 size channels on its 3.5" LCD display. The P311 stores 8,000 sample records that can be viewed on the unit or on a computer via USB cable. The P311 complies with ISO 21501-4 and includes a one year warranty. With excellent quality and reliable performance, the Airy Technology P311 is the best priced handheld particle counter in the market. P311 Handheld Particle Counter Features & Benefits * Measures 0.3 m to 5.0 m * 0.1 CFM (2.83 LPM) flow rate * Measures 3 channels of simultaneous data * Weighs only 1.26 lb (0.57 kg) * Long life laser diode * USB output * Removable and rechargeable AA batteries * Includes carrying case, battery charger and download software * Stores up to 8,000 sample records and 199 sample locations * View data recorded on-screen or via computer * Large color LCD display * Concentration limit of 4,000,000 per ft3 * Complies with ISO 21501-4 and JIS B9921 standards * Lightweight high-impact injection molded plastic enclosure * Easy to clean and wipe down * 1 year limited warranty P311 Handheld Particle Counter Specifications * Measures 0.3 μm to 5.0 μm * 0.1 CFM (2.83 LPM) flow rate * Measures 3 channels of simultaneous data * Weighs only 1.26 lb (0.57 kg) * Concentration limit of 4,000,000 per ft3 * Power: DC 5V 1A (Mini USB TYPE-B) * Operating Temperature: 5 to 35'C * Operating Humidity: 20% to 95%RH non-condensing
Handheld Particle Counter Model P611 The P611 handheld particle counter measures 0.3 µm to 10.0 µm with a flow rate of 0.1 CFM (2.83 LPM). Only 1.26 lb (0.57 kg), user-friendly and easy to configure, this handheld particle counter displays up to 6 size channels as well as (optional) temperature and relative humidity on its 3.5" color LCD display. The P611 stores 10,000 sample records that can be viewed on the unit or on a computer via USB cable. The P611 complies with ISO 21501-4 and includes a two-year warranty. With excellent quality and reliable performance, the Airy Technology P611 is the best solution for professionals who validate ISO cleanrooms (Class 5 - 9) or investigate indoor air quality matters. P611 Handheld Particle Counter Features & Benefits * Measures 0.3 µm to 10.0 µm * 0.1 CFM (2.83 LPM) flow rate * Measures 6 channels of simultaneous data * Weighs only 1.26 lb (0.57 kg) * Long life laser diode * USB output * Removable and rechargeable AA batteries * Includes carrying case, battery charger and download software * Stores up to 10,000 sample records and 999 sample locations * View data recorded on-screen or via computer * (Optional) Temperature & Humidity Probe * Large color LCD display * Concentration limit of 4,000,000 per ft3 * Complies with ISO 21501-4 and JIS B9921 standards * Reports ISO 14644-1 and EU GMP * Lightweight high-impact injection molded plastic enclosure * Easy to clean and wipe down * Internal audible alarm * 2 year limited warranty
TD40 Wireless Particle Monitor Overview The TD40 is a sensitive and concise airborne particle measurement sensor. This unit is well suited to carrying out precise measurements of particle densities in clean and dust free facilities. The unit acquires the current particle concentration in the environment though it's internal air circulation system and particle concentrations at precise diameter intervals are calculated based on the scattering of a laser source. The measurement of concentrations of particles within specific diameter intervals is performed using advanced digital signal processing electronics. TD40 Wireless Particle Monitor Typical Applications * Monitoring of dust sensitive manufacturing environments * Food production and packaging facilities monitoring * Healthcare environment monitoring * Office and factory indoor air quality monitoring TD40 Wireless Particle Monitor Features * Particle Sensor: 16 Particle Bin sensor that counts particles in the range of 0.38µm to 17µm * Temperature Sensor: Important measure for a controlled environment * Wireless: Enables you to connect multiple sensors * Alert: Get real-time alerts when the values go outside set limits * Humidity Sensor: Measures the relative humidity in the room * Easy Set-up: Plug and Play Technology will have the sensor running in minutes
WQ730 Turbidity Sensor Description WQ730 Turbidity Sensor is a highly accurate submersible instrument for in-situ environmental or process monitoring. Applications for the WQ730 include: water quality testing and management, river monitoring, stream measurement, reservoir water quality testing, groundwater testing, water and wastewater treatment, and effluent and industrial control. WQ730 Submersible Water Quality Sensor Turbidity Sensor Features * 4-20 mA output * Marine grade cable with strain relief * In-situ turbidity measurement * Simple and convenient to use * Rugged stainless steel and Delrin sensor housing
Carbon Dioxide Ventilation Controller Model: G01-CO2-B360D CO2+Temperature and RH Detection with Two Stages Ventilation Control * Real time carbon dioxide detection and control * Temperature and humidity detection and display * Three-color backlit LCD display CO2 three concentration ranges * Provide 2x on/off outputs to control automatically two stages ventilation G01-CO2-B360D Carbon Dioxide Ventilation Controller Features * Design for real time detection and control air carbon dioxide. * NDIR infrared CO2 sensor inside with special Self Calibration System. It makes the CO2 measurements more accurate and more reliable. * Built in high accuracy digital temperature & RH sensor, real time monitoring ambient temperature & RH. * More than 10 years lifetime of CO2 sensor. * Three-color (green/yellow/red) LCD backlit changes automatically to indicate ventilation levels based on CO2 measurements: optimal/moderate/poor. * Provide 2 x relay dry contact passive outputs to control 2 stages ventilation or two fans based on CO2 setpoints. * CO2 setpoints can be preset by DIP switches easily. * Specially design an Infrared remote controller for advanced parameters setup to meet different applications. * High quality with the perfect appearance, the best choice for intelligent building and luxury residential. * 100~240VAC power supply to be used in different regions. * CE-Approval. G01-CO2-B360D Carbon Dioxide Ventilation Controller Application This CO2 controller is used for real time detection ambiance CO2, temperature and humidity. It automatically controls two stages ventilation or two fans based on the CO2 measurements and CO2 setpoints. This CO2 controller has three-color LCD backlit and touch button for monitoring and operation. Specially designed 100~240VAC range of power supply, can be used for different applications in different countries or regions. * Hotel, exhibition hall, hospital, shop, restaurant, air port, train station, theater and other public places * House, villa, office, meeting room, classroom and other rooms * All ventilation systems G01-CO2-B360D Carbon Dioxide Ventilation Controller Specifications * Gas detected: Carbon Dioxide (CO2) * Accuracy@25'C(77'F): ±60ppm + 3% of reading * Stability:
Remote Particle Counter Model P240 The P240 4-channel remote particle counter measures 0.3 m, 0.5 m, 1.0 m and 5.0 m with a flow rate of 0.1 CFM (2.83 LPM). Integration is easy into a real-time monitoring or building management system via Modbus RTU or Modbus ASCII. The P240 is the smallest 4-channel remote particle counter in the market and has easy mounting options. The P240 complies with ISO 21501-4 and includes a 2 year limited warranty. P240 Remote Particle Counter Features & Benefits * World's smallest 4 channel remote particle counter * Measures 0.3 m, 0.5 m, 1.0 m and 5.0 m * 0.1 CFM (2.83 LPM) flow rate * Measures 2 channels of simultaneous data * Long life laser diode * Modbus RTU or Modbus ASCII outputs * Concentration limit of 2,000,000 per ft3 * Complies with ISO 21501-4 and JIS B9921 standards * Lightweight stainless steel enclosure * Easy to clean and wipe down * 2 year limited warranty P240 Remote Particle Counter Specifications * Measures 0.3 μm, 0.5 μm, 1.0 μm and 5.0 μm * 0.1 CFM (2.83 LPM) flow rate * Measures 2 channels of simultaneous data * Power: 9-30 VDC * Concentration limit of 2,000,000 per ft3 * Operating Temperature: 5 to 35'C * Operating Humidity: 20% to 95%RH non-condensing * World's smallest 4 channel remote particle counter
IMR EX610 SMART Sensor Gas Detector MAIN FUNCTION AND FEATURES * SMART sensor module, easy for replacement and maintenance * Intrinsically safe design * Wide screen LCD * High / Low alarm adjustable * Calibration level adjustable for each calibration * Combustible gas channel with high-concentration protection function * Low-voltage alert * Internal memory storage of measurements (10,000 records) * Data upload to PC * Audible, visual and vibration alarm * Self-test power on * Self-diagnostic and self-correction function IMR EX610 SMART Sensor Gas Detector TECH SPECIFICATIONS * Target gas: combustible gas, toxic gas, Oxygen * Detecting method: Natural diffusion * Response Time: Semi-conductor, Catalytic, Thermal Conductivity t 90 < 30s Oxygen, Carbon Monoxide, Hydrogen Sulfide t 90 < 30s Other Sensors t 90 < 120s * Working Conditions: Combustible Gas: -40'C ~ 70'C Toxic Gas: -20'C ~ 50'C Working humidity â?¤ 95%RH non-condensating * Power Source: Lithium battery (DC3.7V 1800mAh) * Charging time: 4 ~ 6hours * Continuous working time: â?¥ 8 hours (for combustible gas and toxic gas) â?¥ 300 hours (for toxic gas under temperature of 20'C) * USB connectivity for data transfer * Explosion-proof grade: Exia II CT4 * Ingress protection: IP66 * Dimensions: 108.4mm x 61mm x 36mm * Weight: about 191g
IMR IX616 Multi Gas Detector * Continuous detection of O2, CO, H2S, CH4 * High / low alarms * High quality sensor that detects gases via diffusion * Durable case suitable for any environment * Measuring memory * Data transfer to PC * Includes four sensors IX616 Multi Gas Detector Specifications * CH4 Detecting Range: 0~100%LEL * H2S Detecting Range: 0~100ppm * CODetecting Range: 0~1000ppm * O2 Detecting Range: 0~30%vol * Accuracy: ±5% FS * Response time: T90 < 30s * Working environment: -20 to 50'C, 95% RH (no dew) * Protection grade: IP65
SMARTEYE EZ-PRO Digital Photoelectric Multi-mode Sensor Description The SMARTEYE EZ-PRO is a high performance, digital photoelectric multi-mode sensor that can be set-up by a single push of a button. There is no guess work on the part of the operator. From that point on, the sensor will automatically maintain a perfect setting, thanks to the dynamic Automatic Contrast Tracking System (ACT). The EZ-PRO AUTOSET routine can also be implemented from a momentary remote switch (i.e. push button or touch screen). The EZ-PRO is equipped with a Contrast Indicator as well as an Action Alert diagnostic indicator that allows the operator to visually substantiate performance. When the lock feature is enabled (see advanced features), the EZ-PRO sensor is tamper-proof. Now, the sensor will provide you with the automatic, hassle-free performance that you expect from a SMARTEYE. It can either be side mounted or Din rail mounted. Epoxy encapsulated, it is ultra rugged and vibration proof. SMARTEYE EZ-PRO Digital Photoelectric Sensor Features and Options * AUTOSET, one button push setup * Remote AUTOSET * ACT, Automatic Contrast Tracking * Action Alert indicator * Three pulse stretchers; 10ms, 25ms, and 50ms * 5-LED Contrast Indicator * Cable or quick disconnect * Interchangeable optical blocks * Button lock out * Light On/Dark On automatic select * NPN and PNP output SMARTEYE EZ-PRO Digital Photoelectric Sensor Benefits * Easy to use * Reduces downtime * Robust design * High reliability * Lower inventory costs * Tamperproof SMARTEYE EZ-PRO Digital Photoelectric Sensor Applications * Labeling * Precision Triggering * Shiny Objects
LOX-02-F LuminOx Flow-through Optical Oxygen Sensor General Description The LuminOx Flow-Through Optical Oxygen Sensor Allows For A Clean Gas Sample Stream Directly Into The Sensor Which Can Be Completely Removed From The Process Environment. The LuminOx Flow-through Optical Oxygen Sensor is developed and manufactured by SST, it is part of the LuminOx family, which is a range of factory calibrated oxygen sensors which measure ambient oxygen levels using the principle of fluorescence quenching by oxygen, also known as luminescence quenching. The LuminOx Flow-through Optical Oxygen Sensor (LOX-02-F) is an extension to the standard range of LuminOx oxygen sensors. The original LOX-02 sensor was designed to be completely immersed in the sample gas environment as the base of the sensor is not gas-tight. The flow-through housing style is sealed on the base which allows for a clean gas sample stream into the sensor which can be completely removed from the process environment. A flow-through housing allows for better sample gas management and options in terms of where the sensor can be situated. The patented technology allows SST to produce a range of sensors that are based on a non-depleting operating principle. This can contribute to the LuminOx sensors having a comparably longer lifetime that other competitor technologies, such as galvanic sensors, for similar applications. LOX-02-F LuminOx Flow-through Optical Oxygen Sensor Features * Luminescence-based optical technology, NOT electrochemical * Contains no hazardous materials; RoHS & REACH compliant * Connects directly to a microcontroller without any additional circuitry * Factory calibrated * High accuracy, fast response * Maintenance free LOX-02-F LuminOx Flow-through Optical Oxygen Sensor Benefits * Compact, flow-through housing with sealed base * Low power, long life due to non-depleting sensing principle * Low cos OX-02-F LuminOx Flow-through Optical Oxygen Sensor Technical Specifications *â?¢ Supply voltage: 4.5 - 5.5V DC * Supply current:
WQ-COND Rugged Water Conductivity Sensors Description WQ-COND Conductivity Sensors are suitable for measuring conductivity in a wide variety of applications including laboratories, streams, rivers, and groundwater. The conductivity sensor's small size and rugged housing make it useful for hand held measurements or permanent installation. WQ-COND Rugged Water Conductivity Sensors Features * Fully encapsulated electronics * Dual 4-20 mA outputs * Sensor armor available for harsh environments * Marine grade cable with strain relief * Measure conductivity up to 82 feet deep WQ-COND Conductivity Sensors Applications Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications. WQ-COND Rugged Water Conductivity Sensors Specifications * Temperature Range: 23 to 158'F (-5 to 70'C) * Conductivity Accuracy: +0.5% of reading * Temperature Accuracy: +0.4'F (+0.2'C) * Temperature Resolution: 0.02'F (0.01'C) * Output: Dual 4-20 mA * Maximum Pressure: 35 psi (82 ft (25m)) * Warm-up Time: 3 seconds minimum * Operating Voltage: 10-36 VDC
Wq201 ph sensor description Wq201 ph sensor is a rugged and reliable water ph measuring device. The ph transmitter is mounted on 25 ft of marine grade cable, with lengths up to 500 ft available upon request. The sensor's output is 4-20 ma with a three-wire configuration. The wq201's electronics are com- pletely encapsulated in marine grade epoxy within a stainless steel housing. The unit also uses a re- movable shield and replaceable ph sensor element for easy maintenance. Wq201 ph sensor features * submersible ph measurements * fully encapsulated electronics * 4-20 ma output * marine grade cable with strain relief * stainless steel housing * replaceable ph element Wq201 ph sensor applications Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications. Wq201 ph sensor specifications * outputâ??: 4 to 20 maâ?? * rangeâ??: 0 to 14 phâ?? * accuracyâ??: 2% full scaleâ?? * maximum pressureâ??: 40 psiâ?? * operating voltageâ??: 10 to 30 vdcâ?? * current draw: 5.5 ma plus sensor outputâ?? * operating temperatureâ??: 23 to +131'f (-5 to +55'c)â?? * warm-up time: 3 seconds minimumâ??
HG-P40C Ultrasonic Proximity Sensor & Module Description * Using only a single transceiver sensor unit for transmit and receive signals. * Convenient for distance measuring and object detection. * Two types of transmit mode for convenience. - Free Run : With a power supply, sensor transmits trigger and burst signal itself - for basic application - External Trigger : External system(controller or processor circuit) controls the trigger signals - for advance application(distance measure) * Two types of input power - Low(5V) for processor circuit usage and High(12V) for controllers. * Four different output signal (simultaneously). - Real time ultrasonic wave amplified from actually received ultrasonic. (for sound pressure measuring) - Real time TTL level square signal(Square Wave) of detection signal. (for robots) - Distance pulse width signal which is proportional to the nearest object from the sensor. (for robots and distance measuring) - Proximity output signal(10mA current) within the preset range(0.5~4.5m) (for industrial use) - Preset range is adjustable from 0.5 to 4.5 m. (factory distance preset available for volume orders) * High performance ASIC Chip for stable transmission and sensitive reception. (Max. approx. 4,000 times amplification) HG-P40C Ultrasonic Proximity Sensor & Module Features * Multi functional transceiver model * Two types of transmit modes (Free Run / External Trigger) * Power Supply (Low : 5V / High : 6~16V) * 4 different output signals (simultaneously) - Real time received and amplified ultrasonic wave - Real time TTL square signal - Distance pulse width signal - Detecting objects within the preset range(proximity) * High performance ASIC Chip HG-P40C Ultrasonic Proximity Sensor & Module Specification * Input DC: Low : 5V / High : 6~16V * Current consumption (when 12V is used) - 12mA (Standby Mode) - 18mA (When an object is detected within the range) - 28mA (Proximity signal 10mA deducted) * Distance Range (at flat plate) - 0.4~3m (when 5V is used) - 0.4~6m (when 12V±3V is used) * Size Module : 20x36x20(mm) Sensor : Φ16
Digital Output Barometer Sensors Enhanced Digital Output Sensors: Extended temperature range ADO Series Barometric Military Grade Pressure Sensors General Description The Digital Output pressure sensors are based upon a proprietary surface mapping technology to produce a fully digital output that virtually eliminates all repeatable errors over temperature and pressure. This series provides a 12 bit digital serial output (14 bit in High Resolution Mode) with superior offset, span and linearity characteristics. The output is SPI and MICROWIRE/PLUS® compatible as well as fully compatible with the All Sensors GA142 Series sensors. In addition to synchronous communications, the Digital Output pressure sensors incorporates a bi-directional, TTL level, asynchronous serial interfaces mode (hardware selectable 9,600 or 19,200 baud). This mode includes a command set that allows the host to interrogate the sensor for model information, pressure range, serial number, pressure units and conversion factor. The command set also allows the host to select a high resolution output mode, make minor adjustments to offset and has an addressable feature that alows multiple sensors to be tied to the same interface buss. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like. All signals are 5V TTL/CMOS compatible. ADO Series Barometric Military Grade Pressure Sensors Features * All Combined Errors Over Temperature Less Than 0.1%, Typical * Wide -40 to 125°C Compensated Temperature Range *Electrically Compatible to All Sensors GA142 Series * Enhanced Dual Serial Interface Mode ADO Series Barometric Military Grade Pressure Sensors Applications * Medical Instrumentation * Environmental Controls * Meteorology ADO Series Barometric Military Grade Digital Output Pressure Sensors * Operating Pressure: 600 to 1100 mBar * Proof Pressure: 60 PSI * Burst Pressure: 120 PSI * Supply Voltage: 7Vdc * Compensated Temperature: -40°C to +125° C * Operating Temperature: -40 to +125° C * Humidity Limits: 0 to 95% RH (non condensing)
Ar8500 ammonia gas detector product description: Ammonia analyzer is a continuous quantitative analysis of formaldehyde concentration apparatus, the apparatus using imported high precision electrochemical principle formaldehyde sensor, fast response speed, high precision, of its stability, good repeatability. The apparatus is widely used in metallurgy, power plant, farms, mines, chemical, scientific research, medical, pharmaceutical, environmental protection and other fields. Ammonia concentration detector, gas detector, gas leak detector Characteristics of the instrument: * adopt imported abroad electrochemical sensor * big screen for multiple parameters of lcd backlight display, visual display unit, gas concentration, working state * the two grade dual alarm settings, the outstanding audio sound alarm, voice of up to 80 db * the service life of the sensor: 2 years(it can be replaced) * power supply: 3 x 1.5v aa battery * battery service life: about 100 hours of continuous use (when the backlight is off). * size: 182*66*32(mm) Ar8500 ammonia gas detector application: * farms, animal farm ammonia detection; * ambient air monitoring and evaluation, * landfill ammonia detection; * frozen field ammonia concentration; * dangerous space into the detection; * shop and workshop etc and the surrounding places ammonia detection; * after decorating the house ammonia detection; * storage tanks, pipelines, valves, leakage detection; * waste field survey Ar8500 ammonia gas detector technical parameters * detection of gas: ammonia ( nh3 ) * measuring range: 0~100ppmâ?? * resolution: 0.1ppm * basic error: 0.5ppm * response time: less than 120 seconds * recovery time: less than 120 seconds * repeatability: less than â± 1% * battery: 3 x 1.5v aa batteryâ??
