Oxygen sensor Oxygen sensor is a kind of metallurgy detection probe which is designed to measure the oxygen content and temperature of the molten steel fast, accurately and directly. 1. Application: used for primary melting furnace, lf and rh furnaces and so on, oxygen probes measure oxygen activity of the molten steel and the oxygen activity of the molten steel in the treating process, which can guarantee the deoxidizer addition, shorten the refining time, help to develop new varieties, improve technology, and promote steel purity. 2. Main features and range of application: Oxygen sensor has three types: 1)oxygen sensor for high ppm 2)oxygen sensor for low ppm . 3)oxygen sensor for ultra-low ppm.
Pmf50r photoelectric sensor Model Pmf50r-rf Sensing type Retro-reflective Sensing object Min dia 60mm opaque object Sensing distance Rp04:0.1~7m; rp05:0.1~4.5m Supply voltage 10-30vdc No-load voltage Max.60ma Response time Max.20ms Ambient humidity 35~85%rh Material Housing: abs; lens: pmma Protection rating Ip67(iec) Cable standard Dia 5.5x 0.2 Accessory Bracket: ib02, screw : m4*25 Note: the sensing distance of retro reflective sensor is measured on rp05 basis. (reflector varies according to sensing distance 40 pieces in one 40*40*30 carton
Brief Introduction: MR-JL269 gas detector for industrial use has a high performance and wide detecting range. It can be used to detect methane, natural gases, propane, LPG, Hydrogen and other combustible gases and find the gas leaking point easily. Features: - Calibration-free on gas sensor - Quick response to combustible gas leakage - Long and flexible gooseneck tube - Adjustable sensitivity - 30-level LED / tricolor show - Battery low voltage alert - Sensor fault self test Specifications Sensor type£ºSemi-conductor gas sensor Detecting gas£ºFlammable gases Gas sampling£ºNatural diffusion Response time£º¡Ü5S Sensitivity£ºBetter than 50ppm Working temperature.-10¡æ-55¡æ Working humidity£º¡Ü93£¥RH Storage temperature£º-30¡æ-60¡æ Storage humidity£º¡Ü93£¥RH Power supply£º3.6V Ni-MH 1600mAh rechargeable battery Charging time£º4 to 6 hours Continuous working time£ºNot less than 8 hours £¨normal working status£© Sensor life£º2 years Dimension and weight£º180mm¡Á72mm¡Á35.5mm about 300g carton box and gift box, according to requirement
Features: - Natural diffusion sampling method and high-sensitivity sensor, with high sensitivity and repeatability - 32-bit built-in MCU, high reliability and self-adaptation ability - Full functions, easy operation - CSTN colorful LCD, more intuitionistic, abundant and clear indication - Compact design, easy carrying - High strength engineering plastics and compound anti-slippery rubber; high strength, water-proof, dust-proof and explosion-proof Spcification: - Gas sampling method: Natural diffusion - Gas sensor type: Catalytic and electrochemical - Detecting gas: Combustible gas, H2S, CO, O2 - Accuracy:
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma analogue voltage 0-5v on/off signal trigger output for multi-sensor application pulse width serial ttl serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install rugged design for use in dusty and humid conditions suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured not just its presence but gives directly 4-20ma serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light object color or any other optical characteristic. Works with hard materials like metal sheet plywood or soft materials like cloth and paper rubber etc.
•agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. •agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. •agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). •agecho accuracy is 1% of the full scale. •agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) •agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. •agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. •agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. •agecho operating temperature 0 to 65 degree celsius. •agecho temperature compensated measurement for better accuracy (optional). •agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
P8v12b ov8858 sensor 8.0m pixel mipi csi 1080p sunny cmos camera module P8v12b ov8858 sensor 8.0m pixel mipi csi 1080p sunny cmos camera module
P16v01b ov16825 sensor 16m pixel cmos camera module for mobile As per factory standard packing
Compact volume High precision Fast response Long service life Overload protection Short circuit protection Anti-interference design Reverse polarity protection Ce, ul, rohs certification Ip67 protection, dust-proof, vibration-proof, water-proof and oil-proof Diameter:3mm Mounting:shielded Switching distance:0.6mm Housing material:stainless steel With led/without led:with led Operating voltage:10-30vdc Ripple:
Detect motions from as far as 5m away with 120 degrees of vision. Auto on & off function, turns on in the dark when motion is detected and stay on 45 seconds and automatically turns off with no motion detected for conserve energy. The unit plugs into any standard outlet to light halls, stairs, bedroom, bathroom etc.
Type: sensor faucet Material: 1.0mm sus304 stainless steel Dimensions(l x w x h): 2000 x 650 x 1900 mm Certifications: iso13485, ce, fda 5-layer corrugated carton
Peak Spectral Response:520 nm Sensitive Area:0.054 m©O Light Current:15 uA @10 Lux 150 uA @100 Lux250 uA @200 Lux Dark Current:
Peak Spectral Response:520 nm Sensitive Area:0.054 m©O Light Current:12.5 uA @10 Lux 125 uA @100 Lux250 uA @200 Lux Dark Current:
Peak Spectral Response:520 nm Sensitive Area:0.054 m©O Light Current:15 uA @10 Lux 150 uA @100 Lux250 uA @200 Lux Dark Current:
Peak Spectral Response:520 nm Sensitive Area:0.054 m©O Light Current:15 uA @10 Lux 150 uA @100 Lux250 uA @200 Lux Dark Current:
Peak Spectral Response:520 nm Sensitive Area:0.054 m©O Light Current:12.5 uA @10 Lux 125 uA @100 Lux250 uA @200 Lux Dark Current:
Peak Spectral Response:520 nm Sensitive Area:0.054 m©O Light Current:12.5 uA @10 Lux 125 uA @100 Lux250 uA @200 Lux Dark Current:
