Steam Cooling Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) (10) Hand Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: ú+10 um (12) Capacity (Ground): 38 L (13) Jet distance: 8 m Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Mist Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip:ú+10 um (12) Capacity(Ground): 38 L (13) Jet distance: 8 m (14) G.W: 25.4KG; CBM: 0.19M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GB; (3) Mist fan AM-650GT; (4) Mist fan AM-650W; (5) Mist Fan AM-702F20 It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Wall Mist Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity(Wall): 10 L (13) Jet distance: 8 m (14) G.W: 17.1KG; CBM: 0.093M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GB; (3) Mist fan AM-650GT; (4) Mist fan AM-650C; (5) Mist Fan AM-702F20 It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Air Cooler design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity (Ground):38 L (13) Jet distance: 8 m (14) G.W: 24.4KG; CBM: 0.118M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our mist fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GT; (3) Mist fan AM-650W; (4) Mist fan AM-650C; (5) Mist fan AM-702F20 It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
The Air Cooled Heat Exchangers also known as Fin fan Coolers. Fin Fan Cooler is nothing but traditional name of Air Cooled Heat Exchanger. Since Fins are used in the Cooler it is called as Fin fan Cooler. Please refer Air cooled Heat Exchanger for all the details. In the Fin fan coolers, the ambient air used as the cooling media to cool. the main hot fluid which used in tube side. All the tubes used in the coolers finned tubes only. The finned tubes are having more contact surface , hence the fin fan cooler one of the best closed circuit and water savable cooling system.
Top Mounted Air Coolers Product Description: Top-mounted series air cooler mainly used with various condensing units in cold storage warehouses. Top-mounted air coolers has three serious :DL/DD/DJ series.DL series suit for cold room of 0.DD series suit for cold room of -18.And DJ series suit for cold room of -23. Casing: Utilizing high quality stainless plate and coating processing,anti-corrosion,the appearance is smooth and beautiful. Heat Exchange Coil: The evaporator utilizes thin walled steel tube and aluminum fins after twice processing. The tube has high heat changing efficiency. Corrugated aluminum fins,fin spacing 4mm,6mm and 8mm. Fans: External rotor motor.The motor anti moisture,anti low temperature large air flow,low noise and reliable working.Fan specification 300-500mm,Number from 1 to 4. Electric Defrost The defrosting system is made up of stainless steel tube which is laid in the coil.The defrosting is time saving and effective .
Have a nice day!I am Cauter Yan from Aolan Industrial Co., Ltd, we are a leading manufacturer in evaporative air cooler for both home/office and industrial use too (from 1000M3/H upto 100000M3/H) we had gained more than 50patents of national invention, utility models and industrial design, our product had passCE, SASO, BV etc, and successfully exported more than 70 countries and regions, including Europe, America, Australia, Japan, Korea, Middle East, Brazil, Southeast Asia, and Africa etc. With years' development, Aolan had grown into a company who occupies the wide international market share, u can view details with link: http://www.aolan-china.com for more details. Hope we have a cooperate opportunity in future! Waiting for your early reply.
Have a nice day!. Thank u for your inquiry. I am Cauter Yan from Aolan Industrial Co., Ltd, we are a leading manufacturer in evaporative air cooler for both home/office and industrial use too (from 1000M3/H upto 100000M3/H) we had gained more than 50patents of national invention, utility models and industrial design, our product had passCE, SASO, BV etc, and successfully exported more than 70 countries and regions, including Europe, America, Australia, Japan, Korea, Middle East, Brazil, Southeast Asia, and Africa etc. With years' development, Aolan had grown into a company who occupies the wide international market share, u can view details with link: http://www.aolan-china.com for more details. As the AZL045-ZY13A/ZY13B, Pls view the specification as attachment. Pls inform the quantity which u want In the other, pls inform more details with your company, and if u use whatsapp ? Hope we have a cooperate opportunity in future! Waiting for your early reply.
This product is usefull for Hot Seaonal Area to control the various functions of Air Cooler. It has following features: 1. Ten Step Speed Fan Speed Control 2. Five Level Water Indication in Cooler Tank 3. Auto Pump off on low water 4. Five Step Cooling Control 5. Run Timer 1 to 9 Hours 6. Sleep Mode with auto Speed and Cooling Decreament every Hour
Vayuvents has designed Man Coolers to provide utmost volume circulation of air, hence resulting in positive feedback from our esteemed clients. These man coolers consist of impeller that is manufactured using cast aluminum alloy coupled on motor shaft. The motor with impeller assemble is mounted in a tubular cradle. Also, there is a provision to adjust the angle of air. Fan Size mm / inches Fan Speed RPM Motor (HP) Air Delivery CFM 300 (12) 1440 0.25 600-2000 400 (16) 1440 0.5 2000-2600 400 (16) 1440 0.75 2600-4000 450 (18) 2880 1 4000-6000 600 (24) 1440 1 6000-8000 700 (28) 1440 2 8000-9000 800 (32) 960 1.5 9000-11000 800 (32) 960 2 11000-14000 900 (36) 960 3 14000-19500 1000 (40) 960 5 19500-26500
Overview CW series High Precision Water Chiller is a kind of refrigeration equipment developed by RUISHENBAO® analytical (shanghai) Co., Ltd., temperature control for precision equipment. It is equipped with divided typeã?�integrated type, air-cooling typeã?�water-cooling type. The S series Divided Air-cooling Chiller with water cycle system, refrigeration system, electrical control system, temperature alarm system adopts high-grade fittings, With imported electronic components and high efficiency compressor, the highest temperature control precision of temperature control precision up to ±0.1 can ensure the long-term stable operation of the main analysis equipment. Advantage: Ultra quiet design, work on low environmental impact; Imported high efficiency compressor, improve the refrigeration efficiency; Industry's highest temperature control precision, minï0.1 High precision controller, reflect the equipment running and fault condition; Perfect types are optional: divided type, integrated type, air-cooling type and water-cooling type Unique dust filter design, protection of compressor, without cleaning control; Unit has been in the factory simulations are carried out to test the actual use conditions, qualified before the factory; Can use ethylene glycol as coolant. The lowest outlet temperature of chilled water can reach 5 Automatic oil return compressor, outdoor type machine mounting surface models can be higher than the indoor machine; Imported the most advanced vortex compressor, low failure rate, ensure the equipment stable long-term operation without a break.
*all equipments are produced by the professional technicians of our own factory, with best price and high quality. We look forward to cooperating with you. Rotary dryer introduction- Rotary drum dryer adopts the means of drum marginal transmission, flange connection, direct heat transfer. It is used for drying fertilizer, ore, mineral, metal, coal, sand, carbon, wood chips, slag, animal manure, etc. Rotary dryer working principle- Materials are sent to hopper of rotary dryer by belt conveyor or bucket elevator, then enter the barrel installed with slope to horizontal line from the higher side, and hot air enters the barrel from the lower side, and then materials and hot air mix together. Materials go to thelower side by gravity when the barrel is rotating. Lifters on the inner side of barrel lift materials up and down in order to make materials and hot air mix completely, which is designed to improve the producing efficiency of rotary dryer.
ZC-72Y evaporative air cooler portable with 6800 CMH air flow Unique design with 3-side air intake to increase the cooling effective area, high quality cellulose cooling pad. 4 - 12? can be reduced effectively. Axial fan blade design, powerful airflow, low noise and long wind distance, Three (3) speed adjustment, full-electronic control, LED lighting display, left-right swing and blast automatically but up and down by manual operation polar air cooler The power consumption is 230W only, energy-saving.It has functions of over load and leakage protection.Low malfunction, convenient maintenance, safe to use PP plastic chassis, high strength, preventing corrosion, impact resistance. Big plastic water tank design:the volume of water tank is 120 Liters which ensure the machine to last working 8 to 13 hours and no need to refill water. With the function of electronic remote control It is suitable for use in places: office, hospital, hotel, internet bar, bus station,waiting hall, villa, indoor and outdoor banquet, exhibition, factory and other public place.
Size(mm) - 400*290*660 Weight - 7.5Kg Color - white Number Of Controls( Speed and Function Switch) - 3 speed Max Noise(1m - Low, High, Medium) -
Size(mm) - 400*290*660 Weight - 400*300*772 Color - White Number Of Controls( Speed and Function Switch) - 3 speed Max Noise(1m - Low, High, Medium) -
Size(mm) - 400*290*835 Weight - 8.5 Kg Color - White Number Of Controls( Speed and Function Switch) - 3 speed Max Noise(1m - Low, High, Medium) -
Size(mm) - 605*480*1040 Weight - 15.11 Kg Color - White Number Of Controls( Speed and Function Switch) - 3 speed Max Noise(1m - Low, High, Medium) -
Size(mm) - 590*340*1170 Weight - 13.34 Kg Color - White Number Of Controls( Speed and Function Switch) - 3 speed Max Noise(1m - Low, High, Medium) -
Size(mm) - 590*340*1190 Weight - 14 Kg Color - White Number Of Controls( Speed and Function Switch) - 3 speed Max Noise(1m - Low, High, Medium) -
Size(mm) - 595*495*1148 Weight - 15.52 Kg Color - White Number Of Controls( Speed and Function Switch) - 3 speed Max Noise(1m - Low, High, Medium) -