YC series heavy-duty single-phase motors of "Willda" brand are suitable for small size machine tools and water pumps, especially suitable for family workshops where only single-phase power be supplied. This series motors are designed with the latest technology, manufactured with the quality materials, have following features: good performance, safe and reliable operation, nice appearance, convenient maintenance, meet the IEC standards. YC series motors are of IP44 totally enclosed fan-cooled (TEFC) type, capacitor starting for rated output up to 3HP, on rated voltage and 50Hz, the starting torque is three times more than the rated torque while 60Hz is 2.75 times more. Capacitors start and run type for Motors 4HP and above, it have following features: high starting torque, smooth running, low temperature rise, low noise and greater overload performance. YC motor is notable for its safty and energy-saving, lower price with nice operation YC motor suitable for air compressor, water pump and other equipment requiring high torque. This series electric motor features by its high starting performance, overload capability, power factor and efficiency, low noise, light weight, little shape and easy maintance. Operating Conditions Ambient temperature: -15¡Ü¦È¡Ü40 Altitude:Not exceeding 1000meters Rated voltage: 220V plusmn;5% Rated frequency: 50Hz or 60Hz Duty/Rating: Continuous running Insulation class:Class B Protection class:IP44/IP54 Cooling method:IC411. Seaworthy packing, wooden crates, cartons.
General specification Cold insulation resistance of the motor conductive part to the housing is no less than 100m¦¸ Insulation dielectric strength:the conductive part and the housing of the motor with stand 500v lasting 1min. For pressure proof experiment but can not be punctured, when the rated voltage¡ü60v; The conductive part and the housing of the motor with stand 1500v lasting 1min. For pressure proof experiment but can not be punctured, when the rated voltage>60v. Temperature 75k Noise 55db.
General Specification Normal insulation resistance:100M¦¸ Dielectric strength:AC 180V 1S Temperature¡Ü75k Noise¡Ü55dB.
General Specification Cold insulation resistance of the motor conductive part to the housing is no less than 100M¦¸ Insulation Dielectric strength:the conductive part and the housing of the motor with stand 500V lasting 1min. for pressure proof experiment but can not be punctured, when the rated voltage¡Ü60V; the conductive part and the housing of the motor with stand 1500V lasting 1min. for pressure proof experiment but can not be punctured, when the rated voltage>60V Temperature 75k Noise 40dB.
General Specification Cold insulation resistance of the motor conductive part to the housing is no less than 100M¦¸ Insulation Dielectric strength:the conductive part and the housing of the motor with stand 500V lasting 1min. for pressure proof experiment but can not be punctured. Temperature
- High Torque Density - High torque to inertia for quicker start and atops. - Ruged design and long life bearing. - Holding torque up to 300 kg-cm. - Smallest frame size. Applications Printing Machines Coding, Marking Machines Packaging Machines CNC Machines Labelling Machines Diamond Machines SPM also. As per motors specification sheet.
Electric motors.
Tripowmotor Model Number Y80M-Y315L Type Asynchronous Motor Frequency 50Hz or 60Hz Output Power 0.37-315KW Protect Feature IP54 OR IP55 Phase Three-phase Certification CCC, CE AC Voltage 180V-690V Y series motor is commonly applied in machinery and equipment without special requirements, such as agriculture machinery, food machinery, fan, agitator and air compressor etc With IP54protction, class F inslution. With IC411cooling. 80-315 mounting type:B3,B5,B35 and V1.
Y2 series AC three phase asynchronous motor Y2 series three phase asynchronous motors is a kind of totally enclosed fan-cooled squirrel-cage AC asynchronous motors with IP54/IP55 protection and class F insulation, its efficiency are in conformity with EFF 2 standard European. Y2 Series motors are widely used as drive mechanism of various machineries, such as pumps, compressors, machining equipments, transportation system, agricultural mechanism, food processing mechanism etc. Frame 80 to 315, 2/4/6/8 poles, 10/12 poles for frame 280 and frame 355 on request. 3) Rated voltage: 180V-690V 4) Frequency: 50Hz or 60Hz 5) Protection class: IP54 6) Insulation class: F 7) Materials: Cast iron, aluminum. 8) EFF: EFF3 9) Poles: 2, 4, 6, 8 10) Cooling method: IC0141 11) Mounting types: IMB3, IMB5, IMB35, IMB34, IMB14 12) Operating mode: S1 13) Connection: "Y" type for 3kW and downwards, "D" type for 4kW and upwards 14) Ambient temperature: -15C
YCT series electromagnetic speed adjustable motor is akind of governor motor which adopts the method of changing exciter current YCT series electromagnetic speed adjustable motorIt is a kind of governor motor which adopts the method of changing exciter current to adjust output rotational, . It has the advantages of high efficiency, low noise, low vibration, wide governor range, no out-of -control area and with negative feedback of speed. Its power grade and installationsize conform to the standard of JB/T7123-93 and IEC, and it was jointly listed by State Planning. Commission, State Economic Commission, Ministry of Finance, Ministry of Power & Machinery as well China Industrial and Commerce Bank as Sixth lot, seventh lot, tenth lot energy-saving product. On the first session of China Machinery Product Fair, it was appraised as "excellent energy-saving product in machinery industry". It consists of three-phase induction motor, electromagnetic difference change clutch and speed indicating generator. It is usually mated with Model JD or ZTK controller to form a set of AC stepless governor device. It is widely applicable to the industries of textile, dying, cement, paper-making, printing, rubber, plastic, sugar-making, agitation, air blowing, fiber and cable, etc. Technical data: Power range 0.55-90kw center Height of frame: 112-355 rated voltage of the motor: 380V(three phase)220V(single motor) excitation winding: No more than 90VV(DC) rated voltage of the controller: 220V rated frequency: 50Hz or 60Hz or special Pretection class: B Duty type: S1 Connection: Y start--0.12kw up to 3kw delta--4kw or more. Wood carton package.
ZB series high-voltage electric oil pump is high voltage, safety and high efficiency. It can be matched with various prestressed equipment, and used in the different works with the oil pressure as power. For example: matched with the suitable machines and devices, it can complete the elemental work such as propulsion, stretching, expansion, clamping, bending, jack-up, extrusion etc; and the engineer operation such as the crimping to conversion wire, rebar, reinforced concrete pile pilling, pile test etc. The oil pump can install safety valve, relief valve and way directional control valve according to your requirement. The oil pump is flexible to operate, convenient to use, safe and reliable. Model:ZB22/50a Rated pressure: 50kn Rated flow: 22(l/min) Net weight: 120kg Power: 3kw Volume: 60l Overall dimension: 740x450x1050.
No-Load Voltage:220V Frequency:50/60Hz Power: 78W Currency: 0.35A Speed: 19,300rpm Load Voltage: 220V Frequency: 50/60Hz Power: 256.2W Currency: 1.215A Speed: 6,720rpm Torque: 0.2N.m Insulation Class: E Used for: Juicer,Blender,Food processor. 20PCS/CARTON.
Voltage:220v/50hz, Power:250-300w, Speed:5, 200-16, 500rpm Used for:juicer, blender, food processor. 20pcs/carton.
No-Load Voltage: 220V Frequency: 50/60Hz Power: 95W Currency: 0.43A Speed: 19,200rpm. Load Voltage: 220V Frequency: 50/60Hz Power: 212.4W Currency: 1.01A Speed: 8,200rpm Torque: 0.120N.m. Insulation Class: E Used for :Juicer,Blender,Food processor. 20PCS/Carton.
No-Load Voltage: 220V Frequancy: 50/60Hz Power: 179W Curret: 0.826A Speed: 17600rpm. Load Voltage: 220V Frequancy: 50/60Hz Powerd: 302.9W Current: 3.021A Speed: 6988rpm Torque: 0.414N. M. Insulation: E Class Used for: Juicer\Blender\food processor. 20PCS/Carton.
No-Load Voltage:127V Frequency:60Hz Power:139W Currency:1.112A Speed:17,500RPM Load Voltage:127V Frequency:60Hz Power:501W Currency:4.46A Speed:6,661RPM Torque:0.366N.m Insulation Class:A,E,B Used for:Juicer,Blender,Food processor. 20pcs/carton.
Constant angle, constant torque micro step driver, the drive voltage of which is from 12V to 40VDC. It is designed for use with 2 phase hybrid stepper motor of all kinds with 42mm to 57mm outside diameter, 6, 8 leads, regulated phase current from 0.5A to 3A. The unique control circuit that it adopts can reduce motor¡¯s noise, make motor run more smoothly, improve motor's performance by 30% at high speed, reduce driver¡¯s heating by 50%. It is widely used in small size of numerical control devices with higher resolution such as carving machine, laser labeling machine, inner laser curving machine and etc. FEATURES * 4 channels constant angle and constant torque micro step, highest micro step: 64 * Highest response frequency: 200Kpps * Current of winding will be reduced by approximately 50% when no step pulse command is received for 0.1 second * Bipolar constant current chopping mode * Opto-isolated signal I/O * Drive current is continuously adjustable from 0.5A/phase to 3A/phase * Single power supply voltage from 12V to 40VDC.
The DVS278 is full digital 2 phase stepper driver based on DSP control. The drive voltage of which is from 24V to 80VDC. It is designed for use with the 2 phase hybrid stepper motor of all kinds with 57mm to 86mm outside diameter, regulated phase current from 2.0A to 7.2A. The highest micro step is 40000ppr. It is widely used in small size numerical control devices such as curving machine, packing machine, CNC and etc. FEATURES * 16 channels constant angle, constant torque micro steps, highest micro step: 40000ppr * Highest response frequency: 200Kpps * Current of winding will be reduced by approximately 50% when no step pulse command is received for 1.5 second * Opto-isolated signal I/O * Drive current is adjustable in 16 channels from 2.0A/phase to 7.2A/phase * Single power supply from 24V to 80VDC.
The DVS2811 is full digital 2 phase stepper driver based on DSP control. The drive voltage of which is from 40V to 110VAC. It is designed for use with the 2 phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter, regulated phase current from 0.5A to 8.0A. The circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly without noise and vibration. The highest micro step is 40000ppr. It is widely used in small size numerical control devices such as curving machine, packing machine, CNC and etc. FEATURES * 16 channels constant angle, constant torque micro steps, highest micro step: 40000ppr * Highest response frequency: 200Kpps * Current of winding will be reduced by approximately 50% when no step pulse command is received for 1.5 second * Opto-isolated signal I/O * Drive current is adjustable in 16 channels from 0.5A/phase to 8.0A/phase * Single power supply from 40V to 110VAC * Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 3s and it is recovered when stepper driver power on or signal MF changes from low level to high level).
The DVS368 is full digital 3 phase stepper driver based on DSP control. The drive voltage of which is from 24V to 80VDC. It is designed for use with the 3 phase hybrid stepper motor of all kinds with 57mm to 86mm outside diameter, regulated phase current from 2.5A to 6.2A. The highest micro step is 60000ppr. It is widely used in small size numerical control devices such as curving machine, packing machine, CNC and etc. FEATURES * 16 channels constant angle, constant torque micro steps, highest micro step: 60000ppr * Highest response frequency: 200Kpps * Current of winding will be reduced by approximately 50% when no step pulse command is received for 1.5 second * Opto-isolated signal I/O * Drive current is adjustable in 16 channels from 2.5A/phase to 6.2A/phase * Single power supply from 24V to 80VDC * Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 3s and it is recovered when stepper driver power on or signal MF changes from low level to high level).
