The Forth Generation of Frozen Weigth Loss Technology
1) Three working modes .
2) The parental thermal separation technology
3) Super frozen wave control technology
4) Anti - frostbite control technology
5) Dual -head simulaneous working technology
6) Antomatic fault detection technology
7) Intelligrnt vacuum stabilization technology
8) The exclusive technology for vendors
Working Theory
It adopts an advanced cooling technology to proper target fat bulges and eliminate fat cells through a gradual process that does not harm the surrounding tissues .when fat cells are exposed to precise cooling, triglyceride in fats will be converted into solid in particular low temperatures ,then they trigger a process of natural removal that gradually reduces the thickness of the fat layer. It shows that the fat cells in the treated area are gently eliminated through the bodyâ??s normal metabolism process, to eliminate unwanted fat
Character
1.Four different cryolipolysis handle for different areas.
Size: Most Big handle size: 330*90*110mm
Big handle size: 200*70*90mm
Mid hanle size: 160*60*65mm
Small handle size: 100*50*65mm
For the different part treatment you can chose working hands and the machine
can automatic identification handle two of them can work together .
2. Lowest temperature
Cooling handle will reach to -13 degree .
3. LED theory
1) Green light can reduce the skin swelling in the freezing treatment .
2) Red light can speed up blood circulation and oxygen to increase activity .
4. Fat ruler caliper
Measure the fat thickness, help you to select the mode of treatment .
5. New design Anti-freezing Membrane
Protect skin froming freeze injury .
Obovious Effect
Parameter
TYPE Cryolipolysis-Beauty-Machine
IUPUT 220V/50Hz OR 110V/60Hz
POWER 800VA
HEAT 37°c ~ 45°c
CRYO -13°c ~ 5°c
VACCUM 10~ 80Kpa
LIGHT Red (630nm) Green (570nm)
COOLING LIQUID Pure water or special coolant
VOLUME 56cm Χ 65cm Χ 118cm
FUSE T3.15AL250V
AMBIENT TEMPERATURE 5°c ~ 40°c
RELATIVE HUMIDITY â?¤80%
ATOMOSPHERIC PRESSURE 86Kpa ~ 106Kpa
Lipo laser
Theory:
Laser for fat reduction, use the 650nm soft laser to destroy the deep fat cells, broke the cell membrane, change the fat to triglyceride, then leave out the body, thanks to metabolism.The laser heat can stimulate the subcutaneous dermal tissue collagen and elastic fibers hyperplasia, make the treated area skin tighten and elasticity
Application:
Intensive physicallipolysis to remove fat
Excess fat cell melted
Body slimming, cellulite reduction
Smooth fatigue
Remove obstruction from channels and collaterals
Promote and accelerate the bodys metabolism
Specification
1. Laser wavelength: 650nm
2. Laser type: diode laser
3. Numbers of treatment probe: 10 (8 big probes and 2 small probes)
4. Numbers of diode laser: 162 diode lasers
5. Time : 30 minutes max
6.Output frequency: 1hz to 1000hz adjustbale
7.Cooling requirements: air cooling
6. Working temperature: 10-40 degree
7. Input current: 240v/110v ac
The Forth Generation of Frozen Weigth Loss Technology
1) Three working modes .
2) The parental thermal separation technology
3) Super frozen wave control technology
4) Anti - frostbite control technology
5) Dual -head simulaneous working technology
6) Antomatic fault detection technology
7) Intelligrnt vacuum stabilization technology
8) The exclusive technology for vendors
Working Theory
It adopts an advanced cooling technology to proper target fat bulges and eliminate fat cells through a gradual process that does not harm the surrounding tissues .when fat cells are exposed to precise cooling, triglyceride in fats will be converted into solid in particular low temperatures ,then they trigger a process of natural removal that gradually reduces the thickness of the fat layer. It shows that the fat cells in the treated area are gently eliminated through the body??s normal metabolism process, to eliminate unwanted fat
Parameter
TYPE Cryolipolysis-Beauty-Machine
IUPUT 220V/50Hz OR 110V/60Hz
POWER 800VA
HEAT 37°c ~ 45°c
CRYO -13°c ~ 5°c
VACCUM 10~ 80Kpa
LIGHT Red (630nm) Green (570nm)
COOLING LIQUID Pure water or special coolant
VOLUME 56cm Χ 65cm Χ 118cm
FUSE T3.15AL250V
AMBIENT TEMPERATURE 5°c ~ 40°c
RELATIVE HUMIDITY 80%
ATOMOSPHERIC PRESSURE 86Kpa ~ 106Kpa
Work theroy:
Photon dynamical instrument is a biological active cold light, and not produce high heat.It applies low-energy and unique optical technology to skin care and treatment , natural and gentle; has prominent effects, low fatalness and no side effect.It is skin nurse specialist, is fit for all kinds of skin, especially useful for serously irritated skin, acne skin and has notable effect for those in sub healthy state to recover and do skin protection and treatment.
1. Red light at 640 nm:
Increases collagen production fivefold in the skin, triggering repair mechanisms and stimulating fibroblast cells and cell growth.
2. Yellow light at 590 nm:
Treats redness and is also used for its soothing, draining and detoxifying properties. It also improves the lymph and blood circulatory system.
3. Blue light at 415nm:
Improves acne prone skin with its purifying and antibacterial properties. It effectively reduces the amount of fluid in the face and treats sensitive skin to provide a clear complexion.
4. Green light at 525 nm:
Reduces pigmentation through penetration into base skin layers. Prevents the forming of fleck, gravid and aging pigment to keep skin smooth and bright.
5. Purple light:
Red and blue light the dual band, it combine both the effectiveness of light therapy, espencially useful in treating and repairing acne and acne-scars.
6. Orange light:
Increase cell energy in proper sequence, it can accelerate metabolism effectively.
7. Laser light:
Penetrate deep layer of skin, accelerate active tissue's metabolism, decompose splash, improve fine lines and flabby skin.
Specification:
Voltageac220v/110v
Wavelength:200¡«900nm
Machine size:35*39*89cm
Packing size43.5*87*70cm
Gross weight: 28 kg
Treatment range
1. Hair removal: suitable for both dark and light color skin, especially for light color skin.
2.Skin rejuvenation: remove wrinkles, speckles, age spot, sun-induced freckles
3.Skin tightening, skin lifting, improves flexibility and tone of skin.
4.Acne removal: improve the situation of oily skin.
5.Vascular removal, rosacea treatment, red veins removal
Why choose us
1. Detailed explanation on products
2. Specialized in manufacturing beauty equipment industry since 2003
3. Fast and safe delivery
4. Oem and odm are available (your own logo can be printed on the machine)
5. No minimum ordre quantity
6. Can be sold to all over the world without any problems
With more than 16 years experience of tool manufacturing in carbide and steel material for nail machines.
In this period,we have gained a good knowledge of the machine types for which these tools are supplied,
as well as the expertise to know which grade of carbide best suits each tool type.
Tools for nail making machine are:
Gripper dies
Cutter dies
header dies
2/GRADE AND APPLICATION:
GradeISOensity TRS Hardness Performance & Application Recommend
G/Cm3 N/mm2 HRA
YG11C K40 14.35 2200 87.6 Forming or stamping dies for metal powders and nonmetal powders
YG15C K40 14 2500 85 Punching & stamping tools under large stress
YG18C K40 13.7 2700 84.5 Impact resistance forging dies,hot-press forging dies and rollers
YG20 K40 13.5 2400 83.5 For various dies made by cold forging,cold stamping and hot forging
YG20C K40 13.4 2600 81-82 Dies for wear resistance or impact resistant application
3/DRAWING OF CARBIDE NIAL TOOLS:
4/PICTURES OF CARBIDE NIAL TOOLS
5/REFERENCE SIZE AND APPLICATION OF CARBIDE NAIL TOOLS:
The wire is fed into the nail making machine. The wire is gripped by a pair of gripper dies. While the gripper
dies hold the wire in place, the free end of the wire is struck by a mechanical hammer, which forms the head
of the nail.
A set of shaped cutters strike the other end of the wire. This cutter forms the point of the nail and at the same
time cut the nail from the rest of the wire. The gripper dies release and feed the wire forward for the next nail.
The formed nails are then collected in bins.
Gripper dies can be used for making nails from copper, stainless steel, aluminum, iron, zinc and many more.
Gripper Dies are those dies which are used in making nails in fasteners industries
6/PACKING AND SHIPPING FOR CARBIDE NAIL TOOLS:
7/CERTIFICATE OF UKO
8/SERVICE OF UKO
1. feedback within 24 hours;
2. good english communication;
3. professional suggestion on product;
4. good traning export sales person;
5. skilled in tungsten carbide sell;
6. could issue the C/O(certificate of origin)to customer to reduce the tax;
7. could accept all payment terms of T/T(both in advanced and after shipment), D/P, D/A, L/C, western union, paypal and etc;
8. could offer free samples below 0.5kgs under the condition of freight paid by customer;
9.MOQ 5kgs for sintered blank
Treatment range
1. Body shaping and tightening
2. Reduce unwanted abdominal fat, love handles (flanks), and back fatï¼?etc.
3. Relax muscles and tendons to promote better blood circulation
Why choose us
1. Detailed explanation on products
2. Specialized in manufacturing beauty equipment industry since 2003
3. Fast and safe delivery
4. Oem and odm are available (your own logo can be printed on the machine)
5. No minimum ordre quantity
6. Can be sold to all over the world without any problems
7. Email me for more questions (vivianchoicy
8. One year quality warranty and lifetime maintenance
Treatment range
1. Remove wrinkles on around forehead, eyes, mouth, etc
2. Lift and tighten both cheeks skin
3. Improve skin elasticity and shaping contour
4. Imrpove jaw line, reducing marionette lines
5. Tighten the skin in the forehead, lift the eyebrows line
6. Improve the skin complexion, make the skin delicate and bright
7. Remove neck wrinkles
Treatment range
1. Break up fat cells
2. Tighten skin, improve flabby skin
3. Cellulite removal
4. Promote metabolism and blood circulation
5. Improve the stretch marks
Technical specification
Operation mode cavitation, rf
Screen 7 inch color touch screen
Cavitation mode
Frequency 40khz
Energy density 0~3w/cm2
Diameter of handl50mm
Rf mode
Rf frequency 1mhz
Maximum output power 300w
Hand-piece area
Larg15x4 electrode distance: 25mm
Middl10x4 electrode distance: 17mm
Small ï?5x4 electrode distance: 9mm
Size 493632cm
Weight 20kg
Treatment range
1. Skin tightening.
2. Fat reduction.
3. Body slimming, body shaping.
4. To promote and accelerate the bodyâ??s metabolism.
Techinical specification
Energy regulation can be continuously adjustable within the range of 30 stalls - 75 stalls
Step 5
Operating frequency 4mhz
Single output points 576 point
Probe 525 shoots
Input power less than 580va
Net weight 38x(15%kg
Size 650nmx710nmx1240nm
Treatment range
1. Permanent remove unwanted hair the all parts of your body and for hair colors
2. Remove skins flaw and improve the skin quality;
3. Lighten and remove all kind of pigmented lesion e.G. Speckles, age-spot, sun-induced spots
4. Skin-rejuvenation, skin-whitening and enhancement of skin elasticity
5.Lighten also remove acne
6.Remove the wrinkle and shrink the skins pores
7. Remove vascular lesions on face and bottle nose
8. Remove of vascular lesions
Technical specifications
Laser type intense pulse light
Wavelength 430nm/510nm/560nm/640nm/690nm(530nm/580nm/750nm optional)
Spot size 10*45mm
Screen 8 inch touch screen
Cooling system wind + water +semiconductor cooling
Normal mode
Energy density 1030j/cm2
Pulse width 19.9ms
Professional mode
Energy density 1030j/cm2
Pulse width 19.9ms
Pulse delay 595ms
Cooling contact cooling
Shr/opt mode:
Energy level 1~10
Frequency 1~10hz
Technical specifications
Laser type diode laser
Max power (cw) 30w
Wavelength 980nm
Operation mode continuous or pulsed
Pulse duration 0.5999ms
Repetition rate 1, 000hz
Delivery system well-cutting fibersm905 port
Aiming beam 0.13mw (red)diode laser
Input power ac230v 50hz 180va
Output power 0.530w adjustable continuously
Control system lcd touch screen, microprocessor controlled
Cooling system air cooling system
Dimension 430x300x200(mm
N.W 9kg
Treatment range:
1. 1064nm laser can penetrate into deep layer of the skin, so it is easily absorbed by blue, black and green color pigment; therefore, it is very suitable to treat the pigment disease in the dermal layer. For example, getting rid of tattoos, eyebrow tattoos, otas nevus and pigmentation disease.
2. 532nm laser can penetrate into light layer of the skin; therefore, it is very easily absorbed by the brown, red and deep-brown color pigment. For example, eliminating freckles, pigment spots and other light-color tattoos.
Technical specification:
Laser type q switch nd: yag laser
Laser wavelength 1064nm/532nm
Maximum output power 800mj / 400mj
Pulse width 10ns
Frequency 1-6hz
Light-guide mode handle laser gun
Control mode 7" lcd color touch screen
Cooling mode water cooling system
Treatment range
1. Skin photoaging: remove wrinkles, tiny veins and acne, bringing excellent skin
Rejuvenation effect.
2. Benign pigmented problem, such as flecks, pigment spots, freckles etc.
3. Benign vascular problem, such as flush, telangiectasia, spider nevus etc.
4. Unwanted hair removal
Technical specification
Model cb-102a
Output power 800w
Handpiece ipl*2(hair removal & skin rejuvenation)
Spot size 10x45mm, 8x34mm
Standard handpiece (wavelength) 560-1200nm(skin rejuvenation), 695nm-1200nm(hair
Removal)
Optional handpiece(wavelength) 400-1200nm, 530-1200nm, 595-1200nm
Energy density 10-60j/cm2
Pulse number 1-6
Pulse delay 5-100ms
Pulse width 1-10ms
Operate interface 8 inch color touch screen
Cooling system semiconductor cooling & water cooling & air cooling system
Frequency 1-3hz
Dimensions 42cm*65cm*107cm
Weight 55kg
