Supplier : Tungsten carbide roller for cold drawn weled wire mesh, tungsten carbide wire drawing die and PCD wire drawing die, tungsten carbide nail cutter, tungsten carbide cold heading die for bolt and nut
With more than 16 years experience of tool manufacturing in carbide and steel material for nail machines.
In this period,we have gained a good knowledge of the machine types for which these tools are supplied,
as well as the expertise to know which grade of carbide best suits each tool type.
Tools for nail making machine are:
Gripper dies
Cutter dies
header dies
2/GRADE AND APPLICATION:
GradeISOensity TRS Hardness Performance & Application Recommend
G/Cm3 N/mm2 HRA
YG11C K40 14.35 2200 87.6 Forming or stamping dies for metal powders and nonmetal powders
YG15C K40 14 2500 85 Punching & stamping tools under large stress
YG18C K40 13.7 2700 84.5 Impact resistance forging dies,hot-press forging dies and rollers
YG20 K40 13.5 2400 83.5 For various dies made by cold forging,cold stamping and hot forging
YG20C K40 13.4 2600 81-82 Dies for wear resistance or impact resistant application
3/DRAWING OF CARBIDE NIAL TOOLS:
4/PICTURES OF CARBIDE NIAL TOOLS
5/REFERENCE SIZE AND APPLICATION OF CARBIDE NAIL TOOLS:
The wire is fed into the nail making machine. The wire is gripped by a pair of gripper dies. While the gripper
dies hold the wire in place, the free end of the wire is struck by a mechanical hammer, which forms the head
of the nail.
A set of shaped cutters strike the other end of the wire. This cutter forms the point of the nail and at the same
time cut the nail from the rest of the wire. The gripper dies release and feed the wire forward for the next nail.
The formed nails are then collected in bins.
Gripper dies can be used for making nails from copper, stainless steel, aluminum, iron, zinc and many more.
Gripper Dies are those dies which are used in making nails in fasteners industries
6/PACKING AND SHIPPING FOR CARBIDE NAIL TOOLS:
7/CERTIFICATE OF UKO
8/SERVICE OF UKO
1. feedback within 24 hours;
2. good english communication;
3. professional suggestion on product;
4. good traning export sales person;
5. skilled in tungsten carbide sell;
6. could issue the C/O(certificate of origin)to customer to reduce the tax;
7. could accept all payment terms of T/T(both in advanced and after shipment), D/P, D/A, L/C, western union, paypal and etc;
8. could offer free samples below 0.5kgs under the condition of freight paid by customer;
9.MOQ 5kgs for sintered blank
We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol
We put forward a high quality of assortment of Nickel which is available
in many forms including LME registered and non registered cathodes,
cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder,
flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods.
Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile,
somewhat ferromagnetic, and a fair conductor of heat and electricity
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments.
Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer!
we can also produce the following types:Z11,w.v.s13,S12,S10,S01,L,13,11
Note: Other specification can be made upon customer's requirements.---chengdu woco carbide
Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.
