Polyurethane Enameled Copper Round Wire, Class 130 This wire has baked varnish insulation mainly composed of polyurethane resin over its copper round conductor. Features: Most widely used enameled wire. Solderable at 380 f¦. Easily colored in a variety of colors. Excellent dielectric characteristics at high frequencies. Few pin-holes. Applicable Standard: MW75-C. IEC60317-4. GB/T6109.4. JIS C 3202.6. Typical Applications: Relays, Small motors, Small transformers, Magnetic heads, Coils for telecommunication equipment. Range of Conductors' diameter: 0.016-0.55 Polyurethane Enameled Copper Round Wire, Class 130 This wire has baked varnish insulation mainly composed of modified polyurethane resin over its copper round conductor. Features: Higher cut-through temperature than UEW/130. Solderable at 400 f¦. Easily colored in a variety of colors. Excellent dielectric characteristics at high frequencies. Few pin-holes. Applicable Standard: MW79-C. IEC60317-20. GB/T6109.10. JIS C 3202.6. Typical Applications: Relays, Small-motors, Small-transformers, Ignition coils, Water valves, Magnetic heads, Coils for telecommunication equipment. Range of Conductors' diameter: 0.016-0.55 Polyurethane Enameled Copper Round Wire, Class 180 This wire has baked varnish insulation mainly composed of modified polyurethane resin over its copper round conductor. Features: Higher cut-through temperature than UEW/155. Solderable at 420 f¦. Easily colored in a variety of colors. Excellent dielectric characteristics at high frequencies. Few pin-holes. Applicable Standard: MW82-C. IEC60317-51. GB/T6109.23. JIS C 3202.6. Typical Applications: Relays, Micro-motors, Mini-transformers, Ignition coils, Water valves, Magnetic heads, Coils for telecommunication equipment. Range of Conductors' diameter: 0.016-0.55 Polyurethane Enameled Copper Round Wire for Relay This wire has baked varnish insulation mainly composed of modified polyurethane resin over its copper round conductor. Features: Excellent consistency of conductor resistance, Excellent consistency of insulating film thickness. High solt-fill. Few pin-holes. Suitable for high speed winding equipment. Applicable Standard: JIS C 3202.6. IEC60317-20. Typical Applications: Power relays, High frequency relays, Time relays, Automotive relays, Telecom relays, Sealed relays. Range of Conductors' diameter: 0.016-0.55
COPPER TUBES ARE AVAILABLE IN DIFFERENT THICKNESS AND GAUGES. COPPER TUBES ARE AVAILABLE IN 50FT PANCAKE COILS-SOFT TEMPER COPPER TUBES IN 6 MTR STRAIGHT LENGHTS - HARD TEMPER
Copper wire mesh we produce Brass Wire Mesh, from 6mesh/0.71mm to 180mesh/0. 05mm; Phosphor Bronze Wire Mesh, max 400mesh/0.03mm; Copper Wire Mesh, from 6mesh/0.71mm to 100mesh/0.102mm Material: Brass Wire,Red Copper Wire, Phosphor Bronze Wire Weaving Type: Plain Weave, Twill Weave, and Dutch-Plain Weave Features: Brass Wire Mesh is also named Brass Wire Cloth, it has better abrasion resistance, better corrosion resistance, higher strength and lower electrical conductivity. Copper Wire Mesh is also named Copper Wire Cloth, it has better abrasion resistance, better corrosion resistance. Phosphor Bronze Wire Mesh is also named Phosphor Bronze Wire Cloth, it has features of corrosion resistance, wear resistance and tear resistance. Application: Brass Wire Mesh is used in sieving diversified pellet, powder, porcelain clay and glass, chinaware printing, filtering liquid and gas. Copper Wire Mesh is mostly used as filters in a lot of industries. Phosphor Bronze Wire Mesh is mostly used as filters in a lot of industries.
Normal spec. Standard.
Coil weight: 300kg.
Seamless phosphorus deoxidized copper tube
Copper pipe used for: Air conditioner and refrigerator, water tube service and distribution, fire protection, solar, fuel/fuel oil, natural gas, liquefied petroleum (LP) gas, HVAC, snow melting, drain, waste, vent piping, for re-drawing use
Edm copper wire We a company that professionally produces electrode copper wires and tinned copper wire, red copper wire, phosphor bronze wire and some special wires. As well we are professionally to manufacture wires and cables making machinery. Such as wire drawing machine, stainless wire cutting machine, and wire enameling machine. Hongshye enamelled copper wires, are high speed, high accuracy, superior straightness and superior discharge, which are easy for wire feeding, can improve the production. Adopt special material , and adopt japanese advanced machinery and advanced technical provide cheap electrode wires for all kinds of advanced wire edm machinery .And we can accept customer's special requirements
Widely used in air-conditioning, refrigeration and thermo-controlling area.
Used for high-technical products
Dry inition coil Dry inition coil 2701
Dry inition coil 9012 Replace: Renault 2303590382
Copper wire scrap Copper scrap wire get cable without plastic
Hot stamping foil Suitable for paper , textile, glass, leather, woods, metal, plastic etc 640mm x 120m roll
Pancake copper tube Upon request 1/4' x 0.51mm x 15m 3/8' x 0.51mm x 15m 1/2' x 0.51mm x 15m 5/8' x 0.56mm x 15m 5/8' x 0.61mm x 15m 3/4' x 0.61mm x 15m
Copper knife switch Material:c11000 Process:forging and machining Original color We can according your requests or samples to produce copper parts. Our products have competitive price and best quality with brass material made by ourself.
Copper cathod
Fan coil Carton/plybox
Copper brass tube Elcetrode of small hole edm machine. Copper tube and brass tube size:0.1-3.0mm(length:200, 300, 400). Type: single hole, multi-hole.
Copper tungsten Coppertungsten: copper--25%; tungsten--75% Round and plate; electrode for cnc edm machine. Specialize in sparking carbide material.
