china coal0001
P-15B Tunnel Scraper Loader
Keyword: scraper loader, tunnel scraper loader
Introduction of P-15B Tunnel Scraper Loader
P-15B Tunnel Scraper Loader is widely used for small coal mines and mining area of roadway with MGC1.1 fixed box type mine car or skip loading rock, coal rock with suitable height greater than 1.9 meters, the net section is 4.5 meters above the roadway.
P-15B Tunnel Scraper Loader also can be used in coal rock or rock roadway, which can be used for drift can also be used on the downhill driving face rock loading, such as adding a tail wheel two, can be carried out on rock tunneling processes between parallel operation in the corners of roadway. P-15B Tunnel Scraper Loader can be used not only in the drift, but also in the angle of less than 30 degrees inclined or turning and turning angle to 90 degrees in the roadway, and for the parallel operation of driving procedures, improve the driving speed.
Structural Characteristics of P-15B Tunnel Scraper Loader
P-15B Tunnel Scraper Loader has the characteristics of high production efficiency, simple structure, convenient operation and so on. Electrical equipment of P-15B type scraper loader (including motor), button switch, magnetic starter, lights can use flameproof type, can be used in the mine gas and dust in danger.
P-15B Tunnel Scraper Loader is mainly composed of a fixed wedge and tail wheel, scraper bucket, transmission (including operating mechanism, trolley, winch), a guide wheel and a trough (feeding groove, groove, middle unload groove) main parts and electrical parts etc.
Technical Parameters of P-15B Tunnel Scraper Loader
P Series Scraper Rock Loader
Keyword: scraper loader, scraper bucket loader, scraper rock loader
Introduction of P Series Scraper Rock Loader
P series rake bucket rocker used in a variety of metal ore, nonmetallic ore, coal mine, railway culverts, water conservancy and other construction projects, can work at the roadway with a tub or skip to rock. It can be used not only in the alley, but also in the inclined angle of less than 30 degrees of the inclined road or turn angle and turn angle of 90 degrees in the use of roadway, also at the same time the parallel operation of the tunneling work to improve the tunneling speed. Electrical equipment with explosion-proof performance, can be used for coal dust and gas in the mine.
P-type rake bucket rock loader of the basic parameters:
P-15B rake bucket rock loader used in high more than 2 meters (4.5 cross - section) of the roadway.
P-30B rake bucket rock loader used in the net height of more than 2 meters (net cross-section above 6 square meters) of the roadway.
P-60B rake bucket rock loader used in the net height of more than 2.4 meters (net section above 8 square meters) of the roadway.
P-90B rake bucket rock loader used in the net height of more than 3 meters (net cross-section above 12 square meters) of the roadway.
P-120B rake bucket rock loader used in the net height of more than 3 meters (net cross-section above 16 square meters) of the roadway.
Technical Parameters of P Series Scraper Rock Loader
Model P15B (A) P30B(A) P60B P90B P120B P150B
scraper bucket volume (m3)0.15 0.3 0.6 0.9 1.2 1.5
Production Capacity (m3/h 15-25 35-5070-10095-140120-180150-220
Rail Gauge (mm) 600 600/900600/900600/900600/900/15001500
Wire rope pulling force (KN)7.2-10.412.3-18.520-2831-5037-5552-72
we can supply used construction equipments with bargain price from Japan such as, used excavator, used wheel loader, forklift, tyre roller, compresoor etc
we can supply any kind of equipments according to the buyer's request. usually deal with 40ft and 20ft but all depends on buyer's reqeust.
This is lola from beijing ocepo construction machinery ltd.,
The factory of rebar coupler for 20 years, also rebar threading machine etc steel machines,
Professional skill and competitive price ,
If you have any need, hope i could do your a favor.
Thanks and regards,
Lola.
21887 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
process 14-40mm rebars, thread length grt to 120mm.
1. Roll thread not cut thread, so could protect the highest tensile strength of parent metal. It meets requirements in JGJ107, ACI318, BS8110, DIN1045 and UBC1997 etc.
2. Easy to operate. Automatic opening-closing mechanism for rib peeling device, need only 30 seconds to finish a threaded end.
3. Peel ribs and roll threads by the same machine, so could save labor and improve productivity.
4. Widely used. Be able to process rebar diameter 16-40mm
5. Environment-friendly, safe, no environment and weather restrictions.
6. Economic, low investment for the equipment
Features and advantages of high manganese cone crusher spare and wearing parts bowl liner, concave and mantle mn22cr2, mn18cr2, mn13cr2
1) material: high manganese steel: mn13%, mn14%, mn18%, mn20%, mn24% high chromium iron: cr20, cr24 up carbon steel ht200 qt400-15
2) use: machinery in metal recovery smash, mine, metallurgy, chemical industry, cement, petroleum etc.
3) production quality testing: high frequency infrared carbon & sulfur analyzer, metallographic microscope, machinery performance testing equipment, hardness testing equipment, ultrasonic inspection equipment
4) easy installation: the anti-abrasion block is a semi-permanent part, which is easy for replacement.
5) certificate iso9001:2008 and casting experience over 10years.
6) factory: over 8000square meters and more than 100 workers
Please to offer you this Original TADANO 25T crane,
4 section booms 32m length
Mitsubishi Carrier and Engine
two hooks
100% original parts from japan.
good working condition
RORO ship or Cargo ship
For complete flexibility a total station that is ready for any challenge. Designed for mid accuracy applications. As standard, an alpha-numerical keyboard and a complete set of application software is included. For additional flexibility, a wide range of options ensures that you can always count on your ts06 total station.
1x gsd04 comm. Sidecover set for ts02/06/09
1x flexoffice standard software
1x gst05l aluminium tripod
1x carry case
1x 1 yr ts02 support & firmware contract
Http://best-surveying.Com/
Product description
As flexible as you are: for basic to advanced users with the need for flexibility and performance.
To ensure that you stay one-step-ahead, leica geosystems has developed a new generation of total stations using latest technology, the leica flexline. For the first time, hardware and software options can be simply selected so that the flexline total station exactly meets your requirements.
Leica flexline ts06 - flexibility that counts
For complete flexibility a total station that is ready for any challenge. Designed for mid accuracy applications. As standard, an alpha-numerical keyboard and a complete set of application software is included. For additional flexibility, a wide range of options ensures that you can always count on your ts06 total station.
What's in the box:
1x leica ts06 5" flexline total station
1x tribrach (gdf-111)
2x batteries (geb211)
1x data transfer cable (gev189)
1x mini prism set (gmp111-0)
1x 4 section pole & spike
1x gsd04 comm. Sidecover set for ts02/06/09
1x flexoffice standard software
1x gst05l aluminium tripod
1x carry case
1x 1 yr ts02 support & firmware contract
With the portable crushing plants, you can build a fully mobile and
Independent mobile process for your needs.With the aim of solving
Supply problems in large infrastructure project located at a long distance
From aggregate production centres, or as a production complement for
These projects.For contracting, quarrying and in-pit crushing applications,
Sanyyo's mining and construction technology offers a wide range of
Proven products.
The packing details are changed according to different models.
Characteristics:
1, firm structure & high reliability;
2, large curshing ratio & large range of capacity available;
3, wedge setting adjustment to get different size products;
4, v sharp broken cavity, without dead zone; productive and efficient;
5, lubrication system, safe and reliable, convenient to maintenance;
6, can be used in stationary or semi-mobile installation;
7, special two sides double bearing system, this design can extend the life span
Of the machine.
Product detailed introduction
Working principleThe motor make the exciter eccentric producing high-speed rotation through the triangle belt .The operation of the eccentric produce great centrifugal force , exciting the screen box to do a certain amplitude circular motion .The materials on the sieve get the impulse from the screen box on the inclined screen surface to do continuous casting movement .During the process of encounter between materials and screen surface , the granule smaller than the sieve will go through the sieve to achieve classification.
Main partsMotor, reducer, drum gear, frame, sealing cover
Advantages1.No used of rubber ball clean- up device, prevent the materials from being polluted when the ball wear down gradually.
2.Simple structure, convenient installation and light weight; reliable operation, long lifeexpectancy;low electricity consumption.
3.To speed up the reunion and separation of content, thus increasing dry weight, reduce the number of large particles
4.Using roller conveying principle, small friction coefficient, wear light
Application1.Quarry industry: suitable for screening and classifying gravel, clay, mountain meal, sand, etc. 2.Coal industry: suitable for screening and classifying lump coal, coal dust, coal washing, etc. 3.Chemical industry: fertilizer industry etc. 4.Mineral-selecting industry: suitable for grading and classifying lump, powder substance, etc. 5.Metallurgy, construction, building materials, abrasives, and other industries
Technical parameters
ModelDiameter(mm)Length of screen surface(mm)Capacity(m3/h)Power(kw)
Dyt-600Ö600
1500-3000 or as requested,
it is related to the sifting ratio
of the material
1-53
Dyt-800Ö8001-103
Dyt-1000Ö100020-303
Dyt-1200Ö120020-503
Dyt-1500Ö150040-805.5
Dyt-1800Ö180080-1507.5
The body of machine is welded by steel plate and steel casting, stable performance and high concentricity of spindle, running steadily without building foundation
Double safety device of mud pressing plate without any influence when the screw get broken and drop into mud cylinder
Spindle and mud pressing plate dip in lubricating oil, intelligent control room direct air forever without plugging mud of trouble
Super housings: siamese steel casting and weighs 150g, steel split-type, special design, the replacement of 1 to pay the higher level spiral time in 30 minutes
We can supply all kinds of machinery spare parts, pipe fitting especially the parts produced by casting, forging or stamping process.
Our leading products are:
Spare parts: weights, hand wheel, bracket. Bearing housing , bearing cap, drum, gear box, valve parts etc.
Lift parts: pulley, support, cap etc.
Auto parts: brake drum, hub, brake disc
Pipe fittings: elbows, reducing outlet tees, con reducer, caps etc.
Heavy machine alarm 3T1815
1) product name: 3T1815
2) voice: 130 decibel
3) alarms 37 times in 60 seconds
4) unit can be ran at 130db. it comes standard with the selector bar in place. to have the unit sound at 112db, simply remove the bar from the back of the alarm
5) cross reference : John Deere #A301074 , John Deere #A331020 ( just remove bar from back of alarm
scription of mortar production line:
I. This line has simple structure ,flexible production process and low cost.Equipments on this line are easily repaired and replaced.
II. The raw materials for mortar are mainly sand,cement,flyash and limestone.They are very cheap, thus,give more additive value to mortar.Over all,this line is of high profit and is the best choice for investors.
Models of mortar production line:
Type Model Mixer/KW Capacity T/Need area/m*m
FRQ:
1.How many kinds of mortar can this line produce?
A: There are more than 16 kinds of mortar and this line can produce about five of them. If you want to produce even more,we can also offer.
2.How many person needed in this line?
A: 3-5 workers will be enough to operate this line.
3.Is the line full-automatic?
A: Yes,we can custom as your need.
4.Whats the difference between full-automatic line and semi-automatic line?
A:(1)Sem-automatic line need manual help to upload materials,while full-automatic line need not.
(2)semi-automatic line may not need material silos,full-automatic line need.
(3)Semi-automatic line is relatively cheaper than full-automatic line.
5. Is it including packing machine?
A: Yes.
6. How many types of mortar production line is there? What¡¯s the difference?
A:(1)Normally,three. Vertical type ,block type and workshop type.
(2)Normally: vertical type:the height of this line is big more investment of steel supporting structure
Block type: more factory area less steel supporting structure
Workshop type: install in a workshop and the height should be low
7.What is factory area needed?.
A: It depends on the line type. 20-200m*m will be enough
8.Is it only dry or can make wet also?
A:This line is most suitable for dry mortar and can mix wet mortar with 16% moisture.
9.What¡¯s the total power consumption (KW)?
A:It is about 50KW. It is widely depends on the capacity and number of raw materials.
10 What¡¯t the capacity of the line?
A:2-50ton per hour.
11.What¡¯s the guarantee period?
A:12 months. With in this 12 months we take care of all the problems occurred, after that we offer repair and maintain service.
12.Can you install in my country?
A:Yes, we offer oversea installation service.
13:Can you teach us how to operate this line?
A:Yes.We offer training service free of charge.
14:What¡¯s the delivery date?
A:30 days.
15: Whats the payment term?
A:TT and L/C.
16.Can you delivery to my port?
A:Yes,no problem.
17:How can I inspect the line before shipment?
A:You can inspect by yourself or you fine someone inspect for you.
Materials for mortar:
1.Cementing material: cement, lime, plaster.
2.Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite.
3.Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc.
4.Water-retention and thickening material.
5.Chemical additives.
Production process:
1.Raw material storage
2.Raw material convey and weigh
3.Addition and weighing of additive
4.materials mixing
5.finished mortar storage and packing
6.Other device: dust collection system+air compressor system+PLC electric controlling system+steel supporting system
