Find Verified Communication Suppliers, Manufacturers and Wholesalers

1, intelligent digital display gun shutdown/pressure 130Bar
2, use the actual flow 14L/min
3. Quadrupole motor 2.2KW/1430Rpm/min
4, 10M high pressure pipe /2.3M water inlet pipe/ceramic short gun/filter/hook/manual/fragile bag/breathable plug /4 color nozzle 055/ weight 55KG

220V 2300 watts 110Bar 10L 2800Rpm/Mim
Product parameters:
Rated pressure: 110Bar
Nozzle model: 050
Input power: 2300W
Rated voltage: 220V
Motor speed: 2800RPM/MIN
Executive standard: JB/T6284-2007

Main parameters:

SLJ-3620Q Gasoline Pressure Washer, 13HP, 250BAR, 15L/MIN, 3400 RPM

Standard configuration:

High performance single cylinder air cooled, four stroke OHV gasoline engine

Gasoline engine with low lubrication protection device

Direct drive crankshaft link pump for gasoline engine with copper cylinder block ceramic plunger

10M high pressure pipe

5 kinds of quick connection nozzles suction nozzles

Pressure adjustable

Low pressure suction joint

High pressure spray gun with safety catch

Ten inch solid tires

Water pipe and spray gun hook

Water inlet pipe and its components

Optional device:

Foam generator

Pipe coiler

SPD-V010 Handheld Roll Gap Checker


Overview



The handheld roll gap checker is specially used to measure the length between spherical surface, arc surface and plane (or spherical surface). It is specially suitable for the opening adjustment of the roll gap of the metallurgical continuous casters in various specifications, because the roll gap checker has the advantages of high resolution, accurate measurement, stable data and easy to use. Because the opening accuracy of the roll gap checker will directly affect the quality of the casting block, this roll gap checker is an indispensable testing equipment in the continuous casting equipment, which can fully meet the needs of on-site installation testing and use process verification. When the hand-held roll gap meter smoothly passes through the gap between the guide rolls of the continuous casting machine, the upper measuring contact of the hand-held roll gap checker contacts the inner arc roll and the lower measuring contact touches the outer arc roll. The handheld roll gap checker is used in perpendicular to the roll diameter direction, during the pushing process, when the hand-held roll gap meter is in the tangent plane of the upper and lower rolls, the measured value is the smallest at this time, and this value is the roll gap measurement value. The design of the hand-held roll gap gauge ensures that the upper and lower contacts of the roll gap checker can smoothly pass the measured roll along a straight line during measurement.

During the measurement process, the roll gap measuring instrument automatically compares the measured values, and displays the minimum measured value on the instrument display interface, which is the current measured roll gap value.


The technical parameters

1. Measuring range of instrument type handheld roll gap checker: 180mm - 400mm (the range can be customized)

2. Measuring range of digital hand-held roll gap checker: 120mm - 400mm (the range can be customized)

3. Measuring range of hand-held thin slab roll checker : 60mm - 150mm (the range can be customized)

4. Measurement accuracy: 0.01mm

5. Working temperature: 25 85

6. Battery capacity: 5000mAh

7. Charger specification: 12V

If the fuel metering spool is worn or stuck, it will cause the engine to not work properly, so take good care of it or use a high-quality spool.
In addition to metering units, we also have hot-selling products such as Nitrogen Oxide Sensor, Fuel Pressure Limiter valve, and Fuel Pressure Sensor.

Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection
The products are 100% new and carefully packed.

1.Name: Fuel Pressure sensor,Fuel high Pressure sensor
2.Certification: CE, TS16949
3.Model NO.: 1623055
4.Function: Control emissions in combustion environments
5.Application: DAF
6.Ciondition: 100% NEW
7.Weight(g): 50.7g
8.Deliverytime: 7-15 days
9.Packing: Neutral packing Customize according to customer needs

The fuel metering unit is also called the fuel metering proportional valve. It is installed at the oil inlet position of the high-pressure oil pump, and is used to adjust the fuel supply amount and fuel pressure value, and is controlled by the ECU. The control process is influenced by the value measured by the rail Pressure Sensor. Simply put, the metering unit can be compared to a throttle valve or a faucet that can adjust the size of the agent.
Fuel metering units are precision components. Improper maintenance or use of inferior filter elements will often lead to excessive water or impurities in the fuel, which will cause the fuel metering spool to wear or stick, resulting in the engine not working properly.
Fuel metering valve 1462C00999 can be used on fuel pumps to controls the amount of fuel entering the pump.
The fuel metering valve regulates the fuel quantity which is fed to the high-pressure chambers of the high-pressure pump depending on the fuel pressure in the fuel rail.

Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection
The products are 100% new and carefully packed.

1.Name: Fuel Pressure sensor,Fuel high Pressure sensor
2.Certification: CE, TS16949
3.Model NO.: 1462C00999
4.Function: Control emissions in combustion environments
5.Application: BOSCH
6.Ciondition: 100% NEW
7.Weight(g): 208.4g
8.Deliverytime: 7-15 days
9.Packing: Neutral packing Customize according to customer needs

Fuel metering valve wear or stuck is due to the fuel system oil circuit itself fault, such as fuel quality, fuel pump wear and other reasons. When replacing a new fuel metering valve, the entire fuel system must be inspected at the same time. Inspect, clean and replace fuel that meets standards.
If you are interested in our Nitrogen Oxygen sensor,Fuel Pressure Limiter valve,Fuel Pressure Sensor and other products, you can contact us.

Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection
The products are 100% new and carefully packed.

1.Name: Fuel Pressure sensor,Fuel high Pressure sensor
2.Certification: CE, TS16949
3.Model NO.: 8-97369-850-0
4.Function: Control emissions in combustion environments
5.Application: ISUZU
6.Ciondition: 100% NEW
7.Weight(g): 190.2g
8.Deliverytime: 7-15 days
9.Packing: Neutral packing Customize according to customer needs

We offer to our customers a large
range of plugs in male thread i.e
cap nuts. These are manufactured
with high grade mild steel for less
wear & tear of threads & longer
life of product.