Carbon anode FC 90% -96% , clean , containers will be loaded full capacity
Specification: Carbon (C): 10.0% max; Moisture: 2.9% max; Loss on ignition: 13.4% max; Iron oxide (FeO3): 0.4%; Calcium oxide (CaO): 0.6%; Sodium oxide (Na2O): 0.2%; Potassium oxide (K2O): 3.5%; Sulfur trioxide (SO3): 0.8%; Silicon dioxide (SiO2): 70.2%; Aluminum oxide (Al2O3): 0.1%; Magnesium oxide (MgO): 0.4%; Appearance density after compaction: 0.24%.
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.
Wood Based Powder Activated Carbon is used for decolorizing in sugar liquors, juices,soybean and food industries. Wood powder activated carbon is non-toxic, without taste and it has the appearance of a fine black powder. Mb Value : 140 to 320 Ash:7 to 12%
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
CARBON CATHODE BLOCK AVAILABLE POL- JEBAL ALI QTY - 5000 MT PER MONTH FC- 85% LOADING PER CONTAINER - 25 MT SIZE - 1- 40MM - 80 MM 2- 150MM -500 MM
Dear Buyers, We are dealing with supplying of Carbon Anode Blocks (FC-95%) from GCC countries in Bulk Quantity.
Carbon Anode Scrap for Sale Qty - 50000 MT POL - Saudi, Bahrain Payment Terms - 100% Advance Loading period - Within 7 days after order confirmation. Minimum order Quantity - 10 Containers Fixed Carbon - 95-98% Sizw - 100-600 mm
HiraChem is your specialist supplier of Granular Activated Carbon. Pure carbon which is gold recovery granular activated carbon is coconut-shell-based granular activated carbons specially designed for gold recovery operations. GR was developed to be a consistent, high performance, high activity gold recovery carbon product line. The activated carbon's ability to achieve high gold loadings and the relative ease with which they can be stripped enables gold processors to obtain the highest possible yields from ores with high silver/gold ratios, carbonaceous ores and ores containing other metals that complex with cyanide; for example, copper and nickel. In Carbon in Leach (CIL), Carbon in Pulp (CIP), and Carbon in Column (CIC) circuits, it is essential that the activated carbon employed provides excellent process performance, minimal losses due to attrition, and minimal maintenance problems. Through the years, Pure carbon has continually upgraded its manufacturing processes to ensure that it continues to provide high quality products. Steps have been added to the manufacturing process which have improved the carbon's resistance to abrasion and reduced its tendency to plug retention screens in adsorption tanks. Platelets (flatter granules which are relatively long and wide while not particularly thick) can end up oriented in such a manner that they pass through the retention screens. This results in a loss of gold-containing carbon, which directly affects percent recovery and pro stability. In order to have a product that has less tendency to plug screens with "platelets," GR is also processed through a vee-wire screen and deÃ?Âdusted. GR products are manufactured specifically for gold adsorption. As a result, the quality of the carbon is extremely consistent and tailored to gold recovery applications. GR activated carbon enable the extraction of even trace amounts of gold from every ton of ore, even when processing average or low-grade ores. Pure Carbon expertise in activated carbon application technology is a valuable resource for designing and optimizing.
Name of product-Coconut shell Activated carbon/ Activated carbon/Activated carbon for Gold recovery/Activated carbon for water treatment/Activated carbon for Gas treatment Key Specifications/Special Features: Iodine- 900 to 1400 , CTC - 45 to 100 we can able supply Mesh Size: 4x8,6x12,8x16,8x30,12x40,12x30,20x50,30x60,50x100,50x200, below100 Mesh, 90% Pass Below 200 Mesh, minus 325
Raw Activated Carbon Powder can be used for all liquid phase filtration applications. It is commonly used to filter chloramines and organic compounds, including pesticides and herbicides, from drinking water. Additional applications include: * Pharmaceutical * Oil & Gas * Drinking water treatment * Groundwater remediation * Wastewater treatment * Pulp & Paper * Brewery & Winery * Dechlorination/chloramine reduction * Removal of organic contaminants * Taste and odor reduction * Disinfection-by-product (DBP) removal
Raw Activated Carbon Powder can be used for all liquid phase filtration applications. It is commonly used to filter chloramines and organic compounds, including pesticides and herbicides, from drinking water. Additional applications include: * Pharmaceutical * Oil & Gas * Drinking water treatment * Groundwater remediation * Wastewater treatment * Pulp & Paper * Brewery & Winery * Dechlorination/chloramine reduction * Removal of organic contaminants * Taste and odor reduction * Disinfection-by-product (DBP) removal
Whetlerite carbons are Cu, Cr and Ag impregnated activated carbons used for respiratory protection against super toxic nerve, blister, blood and choking agents in the military. Whetlerite carbons are used in nuclear, biological and chemical (NBC) filters for collective protection, and in NBC canisters, as part of individual gas masks, for personal protection. Flexus Global exports impregnation of active carbon and whetlerite carbon to various countries.
Exhaust gases from several industrial and production units where coal or sulfide ores are used, contain sulfur-containing toxic gases and vapors such as sulfur dioxide, hydrogen sulfide, carbon disulfide, and several organosulfur compounds. These industrial gases need to be desulfurized effectively before mixing with the environment. Sulfur can also be removed with the use of activated carbons. Flexus Global speciality activated carbons are promising adsorbents for SO2 and sulfur-containing toxic gas removal due to their high efficiency and regenerative capacity.
Formaldehyde and other aldehydes are the main pollutants in indoor air. Formaldehydes are mainly obtained from paint, polymerizing plates, bindings, chemical fibers and even cigarette smoke Activated carbon adsorbents are the most promising adsorbents when adsorption of traces of gases and vapors is concerned. Our impregnated activated carbons offer effective chemisorption of formaldehyde from air.
Carbon monoxide (CO) is a very toxic gas with TLV of 35 ppm and it is to be removed from the air in mines, enclosed spaces, fire breaking places. Active carbon can not hold the CO due to physisorption and therefore palladium impregnated carbon was developed which became even more active due to high RH. This again one of the very specialized carbon exported by us for air purification and CO removal. It almost works like the turn over catalyst and offers very high protection against CO. This carbon has High Surface area providing almost offers endless protection against CO, Works in any RH but becomes more active at high RH.
Activated carbon has very high capacity to adsorb organics, inorganics, bad taste and odour material. Adsorption capacity is enhance by modifications such as acid washing because this modification removes the acid soluble inorganic materials from the carbon and make it more porous, efficient and useful for various liquid process applications such as waste water treatment, water purification, decolourisation process in chemical and pharmaceutical industries, food and beverage industry for many purposes such as decolourization of sugar, dechlorination, decaffeination, purification of organic compounds, etc. Some of the benefits of Acid Wash carbon include Dechlorination of water, better taste, removal of bad odors, removal of color from water, removal of organic substances, etc. Available in different mess Size as per customer requirement.
Among its numerous sources, coconut shells have gained significant attention as a sustainable and efficient raw material for producing high-quality activated carbon. Coconut shell-based steam-activated Carbon is mainly used for the removal of chlorine, organic contaminants, color and odor from drinking water to make it suitable for human consumption. Being microporous in internal structure, coconut shell activated carbon is well suited for organic chemical adsorption, including volatile organic chemicals. - One of the prominent applications of coconut shell-based activated carbon is in water treatment processes. It effectively removes impurities, organic contaminants, and heavy metals, ensuring clean and safe drinking water. - It acts as a decolorizing agent, removing impurities and unwanted odors from edible oils, beverages, and food products finding its application in the food and beverage industry. Additionally, it is employed in the purification of sugar syrups, ensuring high-quality and clear syrup for various confectionery and beverage manufacturing processes. - It serves as an excellent adsorbent in the production of drugs, where it eliminates unwanted impurities, colorants, and traces of heavy metals making it ideal choice in pharmaceutical industry too. The high purity and porosity of coconut shell-based activated carbon make it a preferred choice for pharmaceutical manufacturers to ensure product quality and safety.
(Color Taste Odor Removal) - We are leading exporter of Activated Carbon Blocks, made from high Surface Area, low ash coconut based Activated Carbon with high adsorption efficiency and contaminant removal capacity. The CTO Blcks have high adsorptive capacity that simultaneously removes chlorine, bad taste, odor and organic chemicals that contribute to bad taste. They are suitable for use as Pre and Post Reverse Osmosis Systems in CTO BLOCKS (Color Taste Odor Removal) residential and commercial water purification. Size & Diameter can be customised as per buyer's requirement.
