One step single solution desensitizer which provides quick and easy chair side
solution to sensitivity caused by open tubules, bacteria and micro leakage. It is
applied in one step with a brush. Itâ??s HEMA based composition is soft tissue
friendly and provides immediate relief from dentinal hypersensitivity
Biochar is a carbon-rich product made from renewable agricultural waste residue like coconut shells, corn cobs, cotton stalk, coconut husk, fronds, bagasse etc. It is produced by pyrolysis (heating in the absence of oxygen) that acts as a sustainable and permanent soil amendment. Research findings and experience on the field show that there is an increase in crop yields by using Biochar Soil amendment.
It is a soil amendment that is plowed-in only once and has a lasting effect for centuries.
Biochar enhances soil fertility by stimulating biological activity, improving soil nutrient and water retention, and also increasing organic matter.
It is completely sustainable as the biomass comes from readily available and sustainable agricultural waste. Furthermore, the carbon in the biochar becomes locked up in the soil, removing carbon from the atmosphere.
The main scientifically approved reasons that biochar amendments have resulted in measurable improvements in soil productivity are that it:
Enhances soil biology (40% increase in mycorrhizal fungi)
Improves nutrient retention in soils (50% increase in Cation Exchange Capacity)
Improves the water retention capacity of soils (up to 18% increase)
Increases the pH of acidic soils (1 point pH increase)
Increases soil organic matter
As a performance comparison between N330 and DCB330, the technical performance has been seen higher in partial replacement than the conventional 100% virgin carbon black compounds. Majestiqueâ??s DCB330 passes through vigorous multi-stage, extreme high-temperature mineral and chemical infusion process followed by pelletizing and packaging. This key technology process provides us the leading edge over the traditionally-produced carbon blacks. Our innovative technology has transformed the end of life tyres into spectacular green carbon black products. We guarantee that our DCB330 is as good as the highest quality carbon black available in the market, and in certain cases, Majestiqueâ??s DCB330 is superior to the rest.
ICB550 has been designed with superior technology to not only retain these properties of N550 but also improve the rolling resistance while maintaining traction. It is imperative to assert the importance of Green Carbon Black in the Tyre and Non-Tyre Rubber applications with respect to its suitability in mechanical and dynamic properties without being compromised. It is the most comprehensive way in partially replacing N330, N550 and N660 grades of Virgin Carbon Black in Technical Rubber Applications providing consistent and comparable tear strength and hardness to the characteristics of the products.The synergistic value in blending the carbon grades is promising and cost-effective.
Majestique believes in the power of simplicity for using our product, therefore our carbon blacks are available in a variety of grades and tailored to the specific requirement of your business. Our products are available in Fluffy and Pellets forms, are non- toxic and have a lower PAH than all traditional carbon blacks, making them safe for the environment.
Like N660, MCB660 has high tensile stress, good processing performance, high rebounding performance and high flexibility. This industrial-quality black is suitable for various vulcanization. Compared to semi-reinforcement blacks, MCB660 has higher structure, smaller particle size, higher tensile strain at break, lower heat-up, excellent elasticity and fatigue properties, which make it suitable for fabric cord of tyre, inner tyre, bicycle tyre, hose, belt, cable, shoes, extrusion compounds and rolling
compounds.
Our spent activated carbon original application was in the water filtration for F&B applications. They are derived from coconut shell and are shaped into extruded cylinder blocks of various dimensions. We are looking to sell our stock to clients interested in the following applications:
Reactivation services
Use as an alternative fuel
Other sustainable applications
Quick Details
Place of Origin: Singapore
Type: Extruded Blocks
Usage: Water Treatment Chemicals
Activated carbon is used to purify liquids and gases in a variety of applications, including municipal drinking water, food and beverage processing, odor removal, industrial pollution control. Activated carbon is produced from carbonaceous source materials, such as coconuts, nutshells, coal, peat and wood.
Carbon steel pipe fittings, made according to EN 10241 ( BS EN 10241 / BS 1740 ) standard.
Size from 1/8 to 4 inch, surface treatment by sandblasting, black and galvanized.
supply to international market for over fifteen years.
This European Standard specifies requirements for threaded fittings of nominal sizes from DN 6 to DN 150 inclusive, made out of welded or seamless steel tubes, forging and rolled bars. It is applicable to those threaded steel pipe fittings that are used in the transportation and distribution of liquid or gas
Carbon steel pipe fittings, made according to ASME B16.11 ( 2000LB, 3000LB 6000LB ) standard.
Size from 1/8 to 4 inch, surface treatment by sandblasting, black and galvanized.
supply to international market for over fifteen years.
Granulated Activated Carbon Filter Cartridge for Residential, Commercial, Industrial Use
Specification :
Filtration : Nominal Rating.
Micron Rating : 5um
Length :10" (Most Common for Residential) , 20" (Most Common For Commercial)
ID (Inner Diameter) : 28mm
OD (Outer Diameter) : 65mm
Material : Activated Carbon Coconut Shell Iodine 1000 and Up
Standard Products Equivalent : DEWater PP Indonesian Top Brand
Packaging :
Wrapped with POF Plastic Material.
10" : 50pcs/Carton
20", 30", 40" : 25pcs/Carton
For pure rubber carbon black. we use raw tyre and steam it on 600-650 c temperature . This carbon test in lab after steam for better carbon black result and than we make 25 kg package for supply
For pure rubber carbon black. we use raw tyre and steam it on 600-650 c temperature . This carbon test in lab after steam for better carbon black result and than we make 25 kg package for supply
Our Coconut shell based Activated Carbon is very efficient in removing of small size organic impurities. Its commonly used for waste water treatment, drinking water purification, decoloration, and deodorization.
Packing: 500g, 1kg/bag, 25kg
Country of Origin: Thailand
Carbon Fiber Cloth is made of carbon fiber by woven unidirectional, plain weaving or twill weaving style. The carbon fibers we use contain high strength-to-weight and stiffness-to-weight ratios, carbon fabrics are thermally and electrically conductive and exhibit excellent fatigue resistance. When properly engineered, carbon fabric composites can achieve the strength and stiffness of metals at significant weight savings. Carbon fabrics are compatible with various resin systems including epoxy, polyester and vinyl ester resins.
There are unidirectional carbon fiber fabric used as reinforcement clothing for bridge, road and building. The bidirectional carbon fiber fabric are woven with Plain ,Twill style,satin weave and other pattern.
Material: 100% carbon fiber/
Features: Abrasion-Resistant, Anti-Static, Heat-Insulation, Waterprof
Weight: 100-600 gsm
Width: 100-1500mm
Size: 100m/roll
Style: plain/ twill
Thickness: 0.10-0.64mm
Uses: Any construction, sports industry, automobiles industry, Etc
Carbon fiber plate is carbon fiber impregnated resin curing and continuous pultrusion in the mold. It's made of high-quality carbon fiber and good epoxy resin by yarn tension uniformity, maintaining the strength of carbon fiber and product stability. Tensile strength up to 2800Mpa, elastic modulus up to 170Gpa.
Material: 100% carbon fiber and resin
Width: 5cm 10cm, 20cm
thickness: 1-4mm
Tensile strength: 2400-2800 mpa
Size: 100m/roll
Uses: Building, bridge and any civil work reinforcement.
Zhulin Granular Coal based activated carbon is made from coal though high temperature activation. It is black in appearance, with large pores. It is applied to solvent recovery, catalyst carriers, gas adsorption and water purification in the field of chemicals, environmental protection, power plant, electronics, petrochemical industry, farming, medicine, marine transportation.
