Three-phase flameproof induction with Aluminum Hosing
Suitable for the place where filled with burning gas and air, apply to the power system of petrol machine, diesel, explosion-proof fan and explosion-proof pump.
High flow Bennett oil metermain features
JSJ2 High flow Bennett oil meter adopts advanced technology of U.S. Bennett company, which can be widely used for different fuel dispensers. With advantage of high flow, long working life, high accuracy, firm structure, easy installation, etc., it can be the best choice of fuel dispenser component.
oil flowmeter technical specification
Discharge rate of each revolution 0.5L
Flow range 5-100L/min
Working pressure 0.12MPa-0.35MPa
Accuracy ±0.2%(5L/min-100L/min)
Repeat error ¤0.1%
Working life 10000000L
Xinxiang Mengma Oil-gas oil separator can be also called Oil precision oil separator or Oil fine separator, the most common flange for our oil separator have one through and two through, there are 3 types of flange, namely blank flange,perforated flange and notch flange.
1.Filtering precision:0. 1 Micron .
2.Oil contained in compressed is below 3ppM.
3.Filtration efficiency:99.999%.
4.Service life is approximately 3000h-6000h.
5.Initial pressure differential less than 0.02Mpa.
6.Filter element of air oil separator is made by the thin fiberglass,which imported from HV&Lyd
Xinxiang Mengma Oil-gas oil separator can be also called Oil precision oil separator or Oil fine separator, the most common flange for our oil separator have one through and two through, there are 3 types of flange, namely blank flange,perforated flange and notch flange.
1.Filtering precision:0. 1 Micron .
2.Oil contained in compressed is below 3ppM.
3.Filtration efficiency:99.999%.
4.Service life is approximately 3000h-6000h.
5.Initial pressure differential less than 0.02Mpa.
6.Filter element of air oil separator is made by the thin fiberglass,which imported from HV&Lyd
Xinxiang Mengma Oil-gas oil separator can be also called Oil precision oil separator or Oil fine separator, the most common flange for our oil separator have one through and two through, there are 3 types of flange, namely blank flange,perforated flange and notch flange.
1.Filtering precision:0. 1 Micron .
2.Oil contained in compressed is below 3ppM.
3.Filtration efficiency:99.999%.
4.Service life is approximately 3000h-6000h.
5.Initial pressure differential less than 0.02Mpa.
6.Filter element of air oil separator is made by the thin fiberglass,which imported from HV&Lyd
Xinxiang Mengma Oil-gas oil separator can be also called Oil precision oil separator or Oil fine separator, the most common flange for our oil separator have one through and two through, there are 3 types of flange, namely blank flange,perforated flange and notch flange.
1.Filtering precision:0. 1 Micron .
2.Oil contained in compressed is below 3ppM.
3.Filtration efficiency:99.999%.
4.Service life is approximately 3000h-6000h.
5.Initial pressure differential less than 0.02Mpa.
6.Filter element of air oil separator is made by the thin fiberglass,which imported from HV&Lyd
AROSPEED® Adjustable Fuel regulator is a device installed onto the fuel rail or in-line with fuel lines, this units allows fine turning of fuel curve mechanically by increasing or decreasing fuel pressure to the fuel lines. Boost dictated to steady fuel pressure even under boost conditions resulting from forced induction.
AROSPEED® Fuel Regulator TURBO is made out of billet alumimnium and comes with its own pressure gauge. It also features a twin diaphragm construction, making it suitable for turbocharged car. These Arospeed FPR's are rated for above 1.7 bar of boost making them suitable for high power turbocharged cars. The installation of performance fuel injectors or a high-flow fuel pump requires the use of an after market fuel pressure regulator to allow pressure adjustments while maintaining a stable base pressure. AROSPEED® adjustable fuel regulator can be used to maximise a standard fuel systems ability to cope with minor power modifications.
PRODUCTS FEATURE & BENEFITS
1) Double layers NASA Grade 0.4mm Diaphragm handle turbo pressure
2) 100% tested every piece before shipping ensure NO LEAK!
3) Available 2 different pressure range for NA and Turbo Engines
4) Metallic gauges with clear raeding easy to adjust pressure
EV VACUUM POWER BRAKE
Application of this Vacuum Brake Booster System
- Electric Vehicle
- Electric Trucks,
- Electric Tour Bus,
- Beach ATV ,
- Electric Pushback Tractor ,
- Electric Baggage Tractor
- Hybrids Vehicle
- EV conversion kits
Components Included of Electric Vacuum Pump Kit
- Vacuum Pump
- Sensor Switch ,
- Tee Fitting ,
- Vacuum Hose
- Hose Clamps
- Air Canister .
The demulsifier is a reagent used to destroy emulsions that are formed from mutually insoluble (slightly soluble) substances, one of which is fragmented in the other in the form of small droplets (globules).
Shows ability to inhibit paraffin
Provides fast separation and purity of produced water, can be used in oil gathering systems and in oil treatment plants
It has anticorrosive properties, highly effective for the destruction of stable oil-water emulsions, dehydration of fuel oil, processing of industrial effluents
Effective for dewatering and desalting heavy, highly viscous oils.
HOPU CYA Series centrifugal oil purifier is a centrifuge separator which can separate solid matters from two kinds of different density liquids on a continuous basis and also can separate two liquids simultaneously. By reducing process cycle time and labor requirements, these separators offer high cost efficiency in liquid clarification and reclamation, solid-liquid separation and its classification, recovery and thickening of solids and in other such processes.
Apply for lubrication oil, fuel, etc. two phase, three phase separating Effective separate substances and solids from liquids.
Fuel treatment, Lube oil treatment, Marine, Power stations, Oil field industry.
Centrifuge separator mainly apply to treat fuel, lubrication oil and other mineral oils in marine diesel engines and diesel generator sets in which contain water and mechanical impurities. HOPU CYA series will result in reducing mechanical wear of the diesel engines and other machines so as to greatly extend lifetime of machinery.
CYA series can also be applied to separate two different liquids with different proportion and being immiscible.
hydraulic oil purification systems for injection molding machine
1.effectively break emulsification for high water content hydraulic oil
2.lube oil cleaning system
Newly hydraulic and oil filtration systems,emulsion oil purifier
Why do we choose oil purifier?
After a period of operation, owing to its exposal to oxygen and mixed with water, copper and iron and other foreign materials and high working temperature acceleration , transformer oil will oxidize and lose its original property and cannot be used effectively again. So HUHU oil purifiers can efficiently remove water, dirt, gases and other foreign impurities from oil, such as de-electrical oil, turbine oil, lubricating oil, engine oil, hydraulic oil, compression oil, mechanical oil, quenching oil, heat conducting oil, gear oil etc; so as to maintain its lubricating and insulating property, then to reduce components wear, and cut down oil expenses.
APPLICATIONS:
1. The model TYA is widely used in the fields of mechanism, metallurgy, mine, petroleum, chemical etc.
2. The unit can purify various kinds of lubricants as hydraulic oil, machinery oil, coolant oil, refrigerator oil, gear oil, gasoline engine oil, diesel engine oil, heat treating oil, etc.
3. The unit can quickly remove free and dissolved water, gases, impurities and volatile matter like ammonia gases from lubricants, increase used lubricants quality and recover performance to guarantee the correct working performance of hydraulic system, power system, and lubrication system.
TECHNICAL FEATURES:
1. With strong impurities filtration ability and large-area, mass and deep precision filtration material can remove the tiny and fine impurities from used lubricants. With PM filter can filter off ferreous impurities.
2. Unique degassing and dewatering system, adopts mature film evaporation and 3D flash distillation technology, and multi-stage oil water separating technology, can quickly remove free and dissolved water and gases.
3. Electrical heating device is the optimized pipeline design, to ensure the unique heating and stable oil temperature.
4. Automatic constant temperature control device, automatic liquid level control device, automatic defoaming device, automatic pressure protection device and excellent configuration can ensure the equipment in high performance.
5. Work online with unattended operation and the indicator lights display the running status.
6. The complete unit adopts the safety interlock device. The discharge oil pump, vacuum pump are interlock to the heating device to avoid adverse effect of misuse.
7. Compact design, low noise, easy operation, longtime free maintenance, low power consumption, running cost saving.
Series TY vacuum turbine oil purifier mainly be used for purifying unqualified turbine oil, especially for serious emulsion turbine oil, it can quickly and efficiently break emulsification, separate water, gas, particles from oil. So that makes sure quality of treated oil to achieve new oil's standard, ensure whole turbine system work safely.
This equipment use a special polymer materials as filter medium combined with vacuum separating technology to break emulsification, dewater, degas, remove acid and particles, make the badly turbid turbine oil becomes clear transparent. Series TY is a perfect turbine oil purifier for live line work; also it can purify low viscosity hydraulic oil and lube oil.
Features:
1. Special polymer materials as filter medium with the functions of broken emulsion, dewatering, removing particles
2. Duplex-Stereo film evaporation technology, equips with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.
3. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technology.
4. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.
5. Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely.
6. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
7. Work online with stream turbine, hydraulic turbine.
Turbine Oil Purifier Available Style
1. Fixing type,mobile type with four wheels and mobile type with trailer.
2. Normal appearance type,shelf-covering type and explosion-proof type.
3. Avaliable in different color.
Technical Parameters:
Index Name Unit TY-10 TY-20 TY-30 TY-50 TY-100 TY-150 TY-200 TY-300
Flow rate L/h 600 1200 1800 3000 6000 9000 12000 18000
Working vacuum MPa -0.06~-0.095
Working pressure MPa 0.4
Temperature range 20 ~80
Power supply 380V 50HZ 3Ph (As per users option)
Vacuum Turbine Oil Polishing and Flushing Machine for Series TY
Vacuum Turbine Oil Purification Plant
Vacuum Turbine Oil Polishing and Flushing Machine for Series TY
Application:
TY Series Vacuum Turbine Oil Polishing systems can remove free, emulsified, and dissolved water quickly and effectively to improve system performance and reduce your operating and maintenance costs. It aims at turbine oils nature of high water content, easy emulsifiable and high impurity content, and make the oil recover to the new oil's nature.
It can also mounted on high pressure pump for flushing requirements
Series TY oil purifier is widely used for filtering turbine lubricating oil in electric power, metallurgical, chemical engineering industries. It is good at emulsion breaking, dehydration and removing soap, gelatin, acid, pigment and metal particulates in emulsified turbine oil and low-viscosity lubricating oil as well as turbine oil used in other machinery and electric power equipment.
Feature:
1. Breaking emulsification thoroughly with high- molecule polymeric material.
2. Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water
3. With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the Ã?3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638).
4. With the trapezoidal, spiral, automatic back flushing system.
5.With the advanced dielectric condensation devices.
On-line oil purification can be carried out with turbine or water turbine automatically without any person.
Technical Parameter
item unit TY-10 TY-20 TY-30 TY-50 TY-100 TY-150 TY-200
Flow rate L/h 600 1200 1800 3000 6000 9000 12000
Working vacuum degree Mpa 0.06 0.095
Working pressure Mpa 0.3
Running temperature 40 70the temperature of turbomachine below 55
Heating power KW 14 16 18 30 45 55 60
Total power KW 16 18 20 33 48 61 71
Inlet/outlet caliber mm 25 25 25 32 42 50 50
TYD series oil decoloration machine can quickly remove out impurities, water, gases and recover the oil color to original color.
This machine uses our special additive to discolor, which is purely natural and has high efficiency.
It is installed thermal insulation material, it is a good oil purifier for solid oils,animal oil
It can treat cooking oil,Palm Oil,Animal Oil, coconut oil in oil field, mine, metallurgy, electricity, transportation, manufacturing, food industry. The treated oil is very clear and transparent.
And it is asked by customer to pre-treat the used cooking oil before further biodiesel.
Features:
1.It is installed with thermal insulation material, it is a good oil purifier for solid oils,animal oil
2.This machine adopts the the latest micro-filtration technology,which is a multi-functional purification system with vacuum oil filter, fine filter and decoloring device.
3.It uses pure physical treatment to remove water, gases, impurities and decolor,which will not affect the composition and performance of the oil.
4.Equipped with chain protection device, the machine is easy to operate, safe and reliable.
Parameters Unit TYD-1 TYD-2 TYD-3 TYD-5 TYD-10 TYD-15 TYD-20 TYD-30 TYD-50
Treatment Capacity Ton/day(8 hr)) 1 2 3 5 10 15 20 30 50
Power Supply 380V/50HZ/3PhaseCustomizable
Working Noise dB(A) 65
Trouble-free Working Time H 4000
Continuous Working Time H 150
Inlet (outlet) caliber mm 25 25 25 32 42 42 50 50 60
Weight kg 1500 2000 2500 3000 3500 4000 4500 5000 5500
Size Length mm 1800 1850 1900 1950 2000 2200 2300 2400 2500
Width mm 1300 1350 1400 1450 1500 1600 1600 1700 1800
Height mm 2300 2300 2300 2400 2500 2700 2700 2700 2700
Guarantee value Color L 1-3
Impurity m 1(Customizable)
Water ppm 100
Gas content 0.1% 15(GB/F 7305)
Cleanliness grade 6(NAS1638)
Our company export all kinds of Oil Purifier Machine we have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.
Cooking Oil Filtration Machine for Series COP
Cooking Vegetable Oil Cleaner
Cooking Oil Filtration Machine for Series COP
The cooking oil filtration machine is special for filtering used cooking oil, Coconut Oil,dirty vegetable oil , groundnut oil, olive oil,palm oil etc.
It can remove particle ,separate moisture, gas, free fatty acids, volatile odoriferous material,odor, and wax, foam in the waste oil.
The treated oil is clean, limpidity, and good smell. It is a good purification machine for Fry food factory, oil restaurant, cooking oil factory, biodiesel factory,vegetable oil factory, and waste oil collecting store.
According to the treated oil usages, you can choose different machine body. For edible usage, we suggest you choose stainless steel body; For industrial use, we suggest you choose carbon steel body. If your oil contains too many impurities,we suggest you choose a press filter.
Feature:
1.Strong ability to filter the impurity,strong capability of breaking emulsification. We adopt the high quality filter materials, which has a good function in anti-corrosive, thermos table, mechanical strength. Especially, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities.
2.The combination of coalescing separation and vacuum dewatering
3.Advanced dielectric condensation device
4.With H.P.M high polymeric absorbing material
5.Using the 3D Stereo-Evaporation technology, which can separate the odor and gas from the oil quickly .
6.This machine installs the new pressure protector, which can control the temperature automatically; also it can drain water on line by the waterseparator device. So it is easy to control this machine.
Parameters
Item Unit COP-10 COP-20 COP-30 COP-50 COP-100 COP-150 COP-200 COP-300
Flow Rate L/min 10 20 30 50 100 150 200 300
Work Vacuum MPa -0.06 ~ -0.095
Work Pressure MPa 0.4
Temperature 0 ~ 100
Power supply 380V,50Hz, 3 phase (or as needed)
Work noise dB(A) 75 75 75 78 78 78 80 82
Heating power KW 36 40 45 72 80 90 120 135
Total power KW 38 42 47 75 87 101 135 147
Inlet/outlet mm 25 25 25 32 42 50 50 60
Net weight Kg 450 550 600 750 850 1000 1200 1500
Dimensions mm 1500 1000 1200 1500 1050 1600 1500 1050 1650 1600 1150 1700 1750 1250 1800 1900 1600 1950 1900 1700 2000 2100 1700 2100
Guarantee Value
Item Guarantee indexes
Moisture content 20 PPM
Demulsification value New oil15min,running oil30min
Impurity size 1 micron (no free carbon)
Gas content 0.1%
Clean degree 4 Grade (NAS1638)
Our company export all kinds of Oil Purifier Machinewe have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ETC. Please feel free to contact us.
Light Diesel Gasoline Oil Purifier for Series TYB
Gasoline Diesel Oil Purifier
Light Diesel Gasoline Oil Purifier for Series TYB
Application:
It is for treating the diesel oil,fuel oil,gasoline oil for the generators.
This machine integrates fine filter, high efficiency demulsification and dehydration into one body. This machine, which can remove large amount of water without heating, even 50% water, creates the fastest dehydration speed,
It can quickly separate water from the oil, which even contains half water, to attain cleanness of NAS 6 grade, Convenient using with the go-cart model designed. In a word, it is be used for fast removal of water and sediment in fuel oil or light oil which contains large amount of water.
It can not only remove the impurities, water, and acid matters, organic and inorganic acid effectively, but also can remove guargum,surf, colloid and other sludge can be removed together.
Feature:
1 TYB series purifier adopt special oil water separator which requires no heating, offering 20 times higher water removing efficiently than over other types of purifiers.
2 As no heating is needed, the additives in the oil are well prevented from degradation or deterioration.
3 Easy-to-operate, water can be discharged online automatically without the presence of operators.
4 Low operation cost, 20%-40% lower than vacuum purifier, centrifugal purifier and filter press.
Technical Parameters:
Parameters Unit TYB-10 TYB-20 TYB-30 TYB-50 TYB- 80 TYB- 150 TYB-200 TYB-300
Flow rate L/min 10 20 30 50 80 150 200 300
Working pressure Mpa 0.3
Working noise Db(A) 65-75
Running hours without malfunction H 4000
Continuous running hours H 150
Water content ppm 3
Particle Size um 0.5
Cleanliness NAS 6
Power KW 0.75 0.75 0.75 2.2 2.2 3 3.5 3.8
Size mm 700*570*1200 700*600*1200 800*600*1200 850*650*1200 900*680*1200 1100*750*1200 1300*750*1200 1400*800*1200
Weight Kg 80 90 105 135 150 185 200 230
Our company export all kinds of Oil Purifier Machine we have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.
Portable Oil Filtering and Flushing Machine for Series JL
Portable Oil Filter Machine
Portable Oil Filtering and Flushing Machine for Series JL
Application
Series JL portable oil filtering machine can do precision filtering, remove the tiny or big sized impurity, particleï¼?sediments,and sludes from waste oils. Such asl lubricant oil, hydraulic oil,turbine oil,gear oil,and industrial oils etc. It can also as a pre-filter for all oil treatment equipments
Series JL Oil Flushing machine is composed of high pressure pump, oil storage tank and precise filtering, this machine is an ideal machine for cleaning the dirty oil pipes of those hydraulic equipments,Gear ,turbine equipments as well as collecting and purifying the waste oil come back from the pipes. It can efficaciously remove impurities including sludge and carbon matters from oil, so as to recover the oil nature and make the machine work normally and effectively, for maintaining the hydraulic equipment from blocking and corrupting by impurities. It will greatly prolong the oil and equipments service life.
Feature
1.Using high-quality filter, pollutant carrying capacity, corrosion resistance, high temperature resistance, high mechanical strength, high precision filtering
2.The oil can get to the new oil standard after filtering the mechanical impurities in it
3.Provide the best performance and the most compact design
4.High efficiency, low noise, long life
HOPU'S CYA Series Marine centrifugal oil purifier is mainly used for remove the free water and impurities from the oil,it can be applied to heavy diesel oil, lubricating oil, transformer oil, hydraulic oil, turbine oil clarification and purification to slow wear of diesel engine or other types of machines, and extend the service life of the machine and oil,also can be applied for some of vegetable oil,plant oil which cant dissolve in water and the density is lower than water, such as peanut oil,palm oil,sunflower oil,turpentine oil etc.HOPU always been apply for mineral oil separator: Remove the water and mechanical impurities for fuel oil, diesel oil, lubricating oil, transformer oil, mineral oil, etc. Also can be used to separate emulsion liquid .
Features:
1. Using high-speed disc centrifuge, separation more thoroughly.
2. Have self-discharging function,automatic trash, continuous and efficient.
3. High speed centrifugation to separating water and oil grease and sludge impurities
4. It can quickly separate water and impurity form the oil to ensure the oil quality
5. Using screw oil pump, lower noise, more stable performance.
6. Great ability to break emulsification through high polymer materials
7. PLC programmable controller, enabling unattended,the operation is simple, safe and reliable.
8. Have integrated protection system (filter blocking alarm, motor overload alarm, power fault phase, protection, over voltage and low voltage protection etc.)
Our company export all kinds of Oil Purifier Machine we have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.
1579 Oil Field Machinery Equipments Suppliers
Short on time? Let Oil Field Machinery Equipments sellers contact you.
