SUMO ACRYLIC WALL PUTTY It is one of the best products of itâ??s kind available in the market, provides a very strong, durable foundation and brings out the best performance from the finish paints, both in looks and in durability.
FEATURES :-
SUMO Acrylic Wall Putty is a water based, ready-to-use putty meant for filling and smoothenening out cracks and dents on the plastered wall or similar interior surfaces.
a) The putty has special acrylic binders that ensure that it retains a strong grip on the wall surface, thereby increasing the life of thw paint film.
b) It is made using special equipment and technology that ensure smoothness and consistency
c) On account of the puttyâ??s exceptional whiteness and smoothness, emulsions painted over the putty will tend to look richers
d) It also enhances breathability and lesser porosity compared to conventional putty, thus improving paintperformance further
e) It is quick drying, thus ensuring faster completion of jobs
f) It has better alkali resistance, thus making it more suitable for new walls
RECOMMENDED APPLICATION :-
SUMO Acrylic Wall Putty Can be used for priming plastered walls, asbestos, brick work, concrete, etc
PRODUCT TECHNICAL DATA :-
COLOURS : White
FINISH : Smooth and Matt
COVERAGE : 1 coat: 38-40 sq.ft/KG
2 coats: 24-30 sq.ft/KG
(It may vary from the quoted coverage to factor such as method and condition of application and surface roughness)
DRYING TIME : Surface drying time â?? 20 minutes
GLOSS LEVELS/SHEEN LEVELS : Silky smooth & Matt
FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable
SUITABILITY OF THINNER PAINT Use within 24 hrs.
SHELF LIFE 3 years from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat.
Ensure drying time of 1 Week before cleaning.
An expansion joint or movement joint is an assembly designed to hold parts together while safely absorbing temperature-induced expansion and contraction of building materials, and vibration, or to allow movement due to ground settlement or seismic activity
WE SUPPLIES MATERIALS IN MECHANICAL - ELECTRICAL - PLUMBING (MEP), WITH APPROVED BRANDS LIKE, FAG SKF, SG, Decoduct, DD, RR, MESC, KABEL, DUCAB, PRESTO, LITEX, KEDBROOK, Armoured unarmoured cables, Rubber Flexible, BELDEN AV cables NATIONAL ERA, ATLAS, RAK, COSMOPLAST, BAILEY PLUGS, CONVEYORS, CONVEYOR BELTS, MS STEEL, CS STEEL, STEEL, Structural steel Products etc. Rubber adhesives SC2000 OM2000 RIMA TIP TOP RTT SC2000, OLIVER OM2000,CONTINENTAL TURKEY ZEMA etc. Also we deal in Wear Plates, Abrasion resistant plates as well.
LCL AVAILABLE TO GCC COUNTRIES.
Contact us for pricing, Ahmed, sales dept. Email: info@zemaglobaltrading.com
A calcium silicate insulation board is a non-asbestos insulation product that can withstand continuous working temperatures from 650 to 1100 . It is lightweight, has low thermal conductivity, high strength, is easy to install, reliable and durable. Available in 2 grades, 650 and 1000 and 1100, they are commonly used as a backup insulation for furnaces in the steel, petrochemical, ceramic, cement and glass industries or for fire protection in building construction. It not only saves energy but also increases productivity and provides protection for personnel in industrial safety. In housing construction, calcium silicate insulation board is also used as a fireproof insulation material for ceilings and walls and as a decorative sound-absorbing material.
Properties of calcium silicate insulation board
Thermal shock resistance and stability
Consistently low thermal conductivity
High structural strength at high temperatures
Non-combustible
Electrical insulation properties when dry
Easy to process
Insoluble in water, non-corrosive
Applications
The calcium silicate insulation board is easy to install and handle, and its low thermal conductivity makes it ideal for insulation. It is non-toxic and asbestos-free.
The calcium silicate insulation board is widely used in urban heat networks, metallurgy, electronics, machinery, steel, petrochemicals, ferrous and non-ferrous metal casting, aluminum, ceramics, glass and other industries.
Advantages of calcium silicate insulation board.
Asbestos-free
No fibers
No known health hazards
Low thermal conductivity
Lightweight
Easy to work with and handle
Better than BS3958 Part II 1982 (insulation)
127641 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
Product Description
Single Axis Foot Description
Constructed from strong, lightweight composite materials and an advanced design, it provides state-of-the-art single-axle feet. 10% to 20% lighter than traditional single-axle feet, this low-mobility model features neutral, realistic, waterproof makeup and interchangeable front and rear bumpers with three durometers. Supplied with moulded titanium pyramids.
The unique design feature of the single axis foot is a single articulating joint set at or slightly below ankle height.
The joint allows the toes to be raised (dorsiflexion) and lowered (plantarflexion) relative to the tibia. The amount of movement is determined by a rubber cushion within the ankle unit.
The cushion absorbs shock and cushions the user as he transfers weight from heel touch to toe off.
Overview
1. Item no : 1H40
2. Material : Polyurethane
3. Color : beige
4. Weight : 140-500g
5. Heel height : 10+/-5mm
6. No. range : 21-28cm
7. Weight up to : 100-125kg
8. Quality : have past the one million times bent no break test.
1. Excellent adhesion - prevents falling of tiles
2. Low shrinkage - prevents cracking of tiles and joints
3. Needs no water curing - saves labour and time
The casing cement-head with double plugs (called as cement-head ) is a common cementing tool used as wellhead unit in all kinds of cementing operation. Comparing to cement-head with single plug, it owns longer cement-head body , and upper rubber plug and lower rubber plug can be put in at same time.
The tool owns some advantages such as simple construction, easy operation, high pressure resistant, manifold in common use, flexible in connecting. Especially, the lever type indicator can shows whether rubber plug goes through double plugs cement-head to enter casing so that operator can determine easily.
The new anti - crusting lining board of our company has the characteristics of simple installation and high reliability. It can replace the formwork, and no demoulding is needed after pouring. Directly put into use, shorten the construction period, improve the construction efficiency.
Applicable PARTS: kiln tail smoke chamber, rising flue, cutting cone and cutting pipe and other parts that are difficult to repair with skin and wear, and can also be used for cutting slope and other parts.
Typical Application
1.Cement industry
kiln back lining thermal insulation
2.Ceramic industry
lining of various kilns for thermal insulation, Kiln door, kiln car and dilatation joint, etc,.
3.Petrochemical and metallurgy industries
Heat treatment furnace kiln back lining thermal insulation, mechanic and metallurgy heating furnace, thermal treatment furnace and others industrial furnace and hot face internal lining
4.Glass industry
Glass kiln lining and back lining thermal insulation
5.Aluminium industry
reduction cell firebricks back linings, high temperature reaction, heating device-wall lining and back linings
6.Back-up insulation to brick & castable
7.high temperature electrical equipment thermal insulation
The calcium silicate board is 100% non -asbestos, fire resistant, insulation, Can be used in furnace, kiln, oven's insulation project in many industry areas. common size: 600*300, 1000*500, working temperature 650C and 1050C, thickness: 25-140mm.
PCE is a polycarboxylate based high range water-reducing admixture which enables concrete to be produced with very low water to cement ratios. Polycarboxylate superplasticizer is compatible with air-entraining agents, microsilica, accelerators and many other admixtures; however,each material should be added to the concrete separately.
Thickness 6 mm
Usage/Application Partition
Size 8-4 sq ft
Material Cement, Fibre
Attaching Type Screwed
Fiber cement boards are composite materials made of sand, cement and cellulose fibers. More specifically, they are composed of Portland cement with glass-fiber mesh on the surface. These boards can be used independently or along with plywood.
Upvc square Rain Gutter system
Colors : White,Grey,red & others (based on order)
Size : 6 inch
Thickness: 3mm
Standard length:- 5m ,other custom sizes
Number of pieces in a bundle : 6
Total length in metres/bundle : 30metres(5mx6pc)
Water holding capacity (5m long) : 75litres
Material : UPVC
Accessories : yes..Extra
sodium lignosulfonate superplasticizer are surfactants. After they are added to concrete, the hydrophobic groups are directionally adsorbed on the surface of cement particles, so that the cement has a negative charge. The cement particles with the same charge are mutually repulsed and dispersed under the action of charge repulsion. The flocculent structure formed by the cement at the initial stage of adding water becomes a dispersed structure, and the free water in the flocculent condensate is released, so as to achieve the purpose of water reducing agent.
Therefore, adding wood calcium superplasticizer into concrete can reduce the water consumption of concrete mixture, reduce water cement ratio, improve workability, facilitate pumping and improve the strength, compactness and durability of concrete
In the rotary klin calcining petroleum coke, the petroleum coke is calcined in a natural way, and the temperature is at about 1350.The lining material hall be of good thermal shock resistance, small changes in the lining line and excellent abrasion excellence. The castable produced by our company adopts dense brown corudum and mullite as the aggregate and fine powder, mixed with 97 sillicon carbide to increase the thermal shock resistance and abrasion resistance, and ensure small changes in the lining line. In the process of use, each castable plate is tightly bonded, without seams and castable peeling. And the petroleum coke is not sticky to the klin wall in the calcining process.
Csa binder is a hydraulic binder based on sulfo-aluminate cement, rather than calcium aluminates which are the basis of calcium aluminate cement (fondu cement) or calcium silicates which are the basis of portland cement. Csa binder is used in formulated products either as a hydraulic binder by itself or with the addition of calcium sulphates or in combination of portland cement.
When used as an additive, the following properties can be developed, such as: fast setting time, rapid hardening, the early strength and final strength gains, lower alkalinity (ph value), good expansion value, cracking resistance, corrosion resistance, it can also worked in low temperature.
Csa binder can be applied to a wide range of products:
Fast setting cement and mortars
Rapid repair mortars
Fast set tile adhesives
Self levelling compounds
Self smoothing mortars
Non-shrinkage grouts
Water stopping mortars
Glass fiber reinforced concrete (grc), etc.
The main purpose of corundum crucible is as a container for the analysis and firing of the total production and use of materials or products. Such as the use of coal analysis, metal analysis and melting, chemical raw materials analysis and firing, glass analysis and melting, rare earth and other raw materials and minerals analysis and firing, ceramic and other high-temperature products, firing, System and other industries.
Item Alumina Crucible
Chemical composition (%) Al2O3 99
R2O 0.2
Fe2O3 0.1
SiO2 0.2
Bulk Density g/cm2 3.80
Apparent porosity % 1
Bending strength Mpa 350
Compressive strength Mpa 12000
Dielectric constant 1MHz 2
Max service Temp 1800
