Asian Builders Hardware Construction Material Equipment Suppliers and Manufacturers

Size: 60 X 120 cm GLOSSY

Size: 80x160 cm

Size: 60 X 120 cm HIGH GLOSS

60 x 120 cm MATT

Size: 120 x120 cm

Size: 100x100 cm

Size: 80 X 80 cm

Size: 60 X 60 cm

Size - 600 x 1200 MM (2x4) 600 x 600 MM (2x2) Series : Matt and glossy series Box weight : 27 kg Thickness : 8 MM approx Fob value : 1.5$

Porcelain Slaps/Tiles Series - Glossy /Matt Size - 800x3000 MM 800x3200 MM Thickness- 15MM

Refractory Burner Blocks are special type of Block which are form of Refractory ceramic material. It is used for Boiler, furnace, kiln, fireplaces & fireboxes. Quality: We offer various quality Burner Block are IS-6, IS-8, PI - 30% to 70% Alumina offering high temperature resistance of 1100 C to 1700 C & Special brick as per require technical data considering to application of Brick. Sizes of Burner Block (Inch): 9 x 9 x 9 12 x 12 x 12 14 x 14 x 14 16 x 16 x 16

Brown Granite

Water Based Acrylic Resin Emulsions for Printing Inks & Varnishes We supply ecoprint range of water based acrylic resin for high gloss water based printing Inks and Varnishes. Our ecoprint range of acrylic resins are REACH / ROHS compliant, Formaldehyde free, APEO free, PVC free, Phthalate free and Azo dyes free.

Paint Emulsions We supply wide variety of premium quality water based emulsions for the paint industry. The emulsions are selected based on the applications depending on interior or exterior paint formulation. We also supply paint aids such as thickeners and dispersing agents which are mostly performance polymers used in manufacturing good quality water based Acrylic Paints.

Textile Emulsions We have a broad range of coating products for the TEXTILE INDUSTRY such as Textile finishing agents Strech khadi for hosiery textile printing Ready khadi for textile printing Excellent quality binders for textile printing High quality plastisols

Premium Quality Ceramic Tiles Our Premium Ceramic Tiles are crafted with precision and care, offering both aesthetic appeal and durability. These tiles are made from top-grade materials, ensuring long-lasting performance in any space. Available in a variety of styles, colors, and sizes, they are perfect for both residential and commercial projects. Resistant to stains, water, and daily wear, these tiles combine elegance with functionality, making them a go-to choice for interior designers, architects, and construction professionals. Key Features: High-grade raw materials for superior durability Wide range of designs and finishes Scratch-resistant and stain-resistant surface Ideal for residential, commercial, and industrial projects Available in various sizes to suit any design need Nano Polished Ceramic Tiles (High Gloss Finish) Our Nano Polished Ceramic Tiles are engineered using cutting-edge nano-polishing technology, delivering an ultra-smooth, high-gloss finish that enhances the visual appeal of any space. These tiles offer exceptional resistance to dirt and moisture, making them easy to clean and maintain. Their water-resistant surface and brilliant shine make them perfect for luxury interiors, including homes, offices, and hotels. Designed for durability, they are ideal for high-traffic areas while providing a sleek, modern look. Key Features: Nano-polished for a flawless, high-gloss finish Anti-stain and easy-to-clean surface Enhanced durability and water resistance Ideal for high-end residential and commercial spaces Available in multiple colors and sizes for versatile desig

We Are One Of The Leading Manufacturers And Exporters of Ceramic And Porcelain Vitrified Tiles From India.

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.