Find Verified Bitumen Asphalt Suppliers, Manufacturers and Wholesalers

BITUMEN 60/70- PENETRATION GRADE

Bitumen 60/70 available for international bulk supply.

Product: Bitumen 60/70
Grade: Penetration Grade 60/70
Supply: Spot and Contract
Quantity: Subject to buyer requirement
Delivery: FOB / CIF / CFR subject to destination and availability
Packaging: Bulk / Drums
Inspection: Independent inspection can be arranged subject to transaction terms.

Suitable for road construction, asphalt production, paving and infrastructure
applications.

We welcome inquiries from qualified importers, road contractors, asphalt
manufacturers, construction companies and commodity traders.

Buyers should provide required quantity, destination port and preferred
delivery terms for a commercial quotation.

Bitumen 60/70 is a penetration-grade paving bitumen widely used in road construction, asphalt production and infrastructure projects. It is a dark, viscous petroleum-derived binder with a penetration range of 60 - 70 dmm, providing a practical balance of hardness, flexibility and temperature resistance for general pavement applications. The material can be supplied in new steel drums, jumbo bags or bulk tanker shipments according to project requirements. It is suitable for asphalt concrete, road surfacing, pavement maintenance and waterproofing applications. Each batch can be tested for penetration, softening point, ductility, flash point and other relevant parameters to ensure conformity with agreed specifications and destination-market requirements.

Key Specifications

Product Type: Penetration Grade Bitumen
Grade: 60/70
Penetration at 25 Degree C: 60 - 70 dmm
Appearance: Black to dark brown
Form: Semi-solid / viscous material
Softening Point: Typically around 48 - 56 Degree C, subject to applicable standard
Ductility: According to applicable specification
Flash Point: According to applicable standard

We are trading in - Bitumen 70 Grade

Blown Bitumen 75/25 or Oxidized Bitumen or Blown Asphalt is produced by blowing hot air into the penetration bitumen. This action makes the bitumen more rubbery than its original formula and it becomes harder bitumen. This bitumen recovery the weight loss under heating. Due to low thermal sensitivity, the softening point is much higher than regular bitumen and the penetration index (PI) is higher than road construction bitumen (8>PI>2) due to the letter has a gel-like structure because of asphalt accumulation. Blown Bitumen 75-25 is Semi Solid grade of pure petroleum bitumen. Special physical properties of its grade can be used in different applications in the construction business.

Blown Bitumen 75/25 is produced by the air-blowing of penetration grade bitumen. This is done at high temperatures, resulting in a material of a much higher penetration index. RAHA Bitumen 75/25 is based on petroleum bitumen which is made by blowing bitumen 60/70 by very hot air. The designation of the Blown Bitumen 75/25 refers to the midpoint of the softening point acceptance criteria.


Our Bitumen partner Co. is also capable of producing other grades of Oxidized Bitumen according to the specifications of individual clients. Some of the major advantages of Oxidized Bitumen are that it is completely water resistant, highly flexible and durable. Further, it is chemically very stable. Oxidized bitumen is a very flexible compound that is not only chemically stable but also a very durable compound apart from being completely water resistant. Lastly, Oxidized Bitumen has some very prominent technical advantages that makes it a very sought after compound in various applications.

Uses of Blown Bitumen 75/25

Blown Bitumen 75/25 is a solid or semi-black solid material and gradually liquid when heated. Oxidized Bitumen grades are blown or oxidized Asphalt s which are produced by passing air through soft bitumen under controlled temperature conditions. This process gives the bitumen more rubbery properties than penetration or hard grade bitumens and a variety of uses in industrial applications.

Bitumen

Our bitumen is produced by refineries in Kazakhstan, Azerbaijan, Poland, and the Middle East and is available for sale CIF at the best prices. Alternative TTO, TTV, and STS deliveries. Buyer-friendly procedures. Buyer's mandate welcome

Impregnating Pitch is a special low QI coal tar pitch processed from high-temperature coal tar through fractional distillation and vacuum purification. With low viscosity, strong permeability and high coking value, it is the core raw material for graphite electrode impregnation. It effectively fills the internal micropores of carbon blanks, significantly improves the density, mechanical strength and electrical conductivity of graphite electrodes after secondary calcination. It is widely used in steelmaking graphite electrodes, aluminum electrolysis carbon anodes and various carbon composite materials.
Using high-temperature coal tar as raw material, remove light oil components through fractional distillation, then adopt vacuum flash evaporation technology to separate low QI impregnating pitch from common binder pitch. Strictly control quinoline insoluble content, softening point and volatile matter to ensure stable permeability and coking performance of each batch. The whole process adopts physical purification without impurity pollution, meeting high-standard carbon material production requirements.

Bitumen is a black, semi-solid or liquid substance with high viscosity produced by the non-destructive distillation of crude oil during petroleum refining. The core industry using bitumen is road construction (asphalt) and another significant field is the building industry (roofing membranes, water-proofing felts)

Penetrating Bitumen Ideal for pavements, offering excellent penetration grades that contribute
to the strength and longevity of road surfaces.

Viscosity Bitumen Characterized by its viscosity grade, it's suitable for high-temperature
applications, ensuring stability and flexibility.

Functional Bitumen Used primarily in road construction and waterproofing, it offers high durability and resistance to water.

Superior Quality Functional Bitumen, sourced from the best refineries, our bitumen meets international standards for quality consistency.
This bitumen is obtained by blowing hot air at a temperature of 200 to 300 degrees into pure bitumen.
with a strong logistic network, we gaurantee timely and secure delivery to your projected port.

Superior Quality VISCOSITY BITUMEN , sourced from the best refineries, our bitumen meets international standards for quality and consistency.
these grades are vailable, VG 10, VG20, VG30, VG40

Superior Quality Penetrating Bitumen sourced from the best refineries, our bitumen meets international standards for quality consistency.
Available grades, 40-50 , 60-70 , 85-100 , 120-150 , 200-300 with strong logistic network, we guarantee timely and secure delivery to your projected port.

- Grade 40-50: Suitable for road construction and repair.
- Grade 60-70: Ideal for general paving applications.
- Grade 85-100: Used in various industrial applications.

Bitumen Uses

Highways
Airport runways
Footways and pedestrian ways
Car parks
Racetracks
Tennis courts
Roofing
Damp proofing
Dams
Reservoir and pool linings
Soundproofing
Pipe coatings
Cable coatings
Paints
Building water proofing
Tile underlying waterproofing
Newspaper ink production
and many other applications

Bitumen with different penetration Grade

Bitumen 80/100 is widely recognized as one of the preferred bitumen grades for various industrial applications, including road construction and other projects. The product's specifications are meticulously documented and certified by reputable entities such as SGS or other third-party inspection companies. This ensures that the quality and performance of Bitumen 85/100 meet stringent industry standards, guaranteeing reliability and efficacy in diverse applications.

Penetration Bitumen 60/70 serves as a vital component in road construction projects. It is specifically engineered for optimal performance in such applications. It is imperative to adhere to the recommended usage guidelines and consult with the supplier before considering alternative applications. The properties and specifications of Bitumen 60/70 are rigorously tested to ensure compliance with industry standards and project requirements.

Bitumen 40/50 represents another grade of bitumen available to our clients, catering to a diverse range of project requirements. As with our other products, the specifications of Bitumen 40/50 are meticulously documented and certified by accredited entities such as SGS or other reputable third-party inspection companies. This rigorous quality assurance process ensures that our clients receive a product that adheres to industry standards and meets their specific needs with reliability and consistency.

Bitumen Grade 60/70 is a high-quality, semi-solid petroleum product derived from the distillation of crude oil. Known for its excellent adhesive and waterproofing properties, this grade of bitumen is primarily used in the construction and maintenance of roads, runways, and other infrastructure projects. It is particularly well-suited for hot climates due to its optimal softening point and penetration range, which ensures long-lasting performance even under high temperatures.



Key Features:

Penetration Grade: 60/70, offering a perfect balance between hardness and softness, making it ideal for road construction.
Softening Point: Ensures stability under high-temperature conditions, reducing the risk of road deformation.
Adhesive Properties: Excellent adhesion to aggregates, providing strong and durable road surfaces.
Waterproofing: Superior water resistance, protecting the pavement from water damage and extending the lifespan of roads.
Durability: High resistance to aging and weathering, ensuring prolonged service life of the infrastructure.


Applications:

Road Construction: Ideal for the construction of high-traffic roads, highways, and expressways.
Airport Runways: Ensures smooth and durable surfaces for airport runways, capable of withstanding heavy loads.
Paving: Suitable for various paving applications, including urban roads, rural roads, and parking lots.
Waterproofing: Used in waterproofing membranes and roofing applications, providing excellent protection against moisture.


Specifications:

Penetration at 25C: 60-70 dmm
Softening Point: 49-56C
Flash Point: Minimum 232C
Ductility at 25C: Minimum 100 cm
Solubility in Trichloroethylene: Minimum 99.0%
Specific Gravity: 1.01-1.06


Packaging: Available in drums, bulk containers, or as per customer requirements.

Compliance: Bitumen Grade 60/70 meets international standards and specifications, ensuring consistent quality and performance across all applications.



Why Choose Bitumen Grade 60/70?

Proven Performance: Trusted by engineers and construction professionals worldwide for its reliability and durability.
Versatile Applications: Suitable for a wide range of paving and waterproofing projects.
High Quality: Manufactured under stringent quality control measures to meet global standards.

Bitumen Grade 60/70 is a high-quality, semi-solid petroleum product derived from the distillation of crude oil. Known for its excellent adhesive and waterproofing properties, this grade of bitumen is primarily used in the construction and maintenance of roads, runways, and other infrastructure projects. It is particularly well-suited for hot climates due to its optimal softening point and penetration range, which ensures long-lasting performance even under high temperatures.

Key Features:

Penetration Grade: 60/70, offering a perfect balance between hardness and softness, making it ideal for road construction.
Softening Point: Ensures stability under high-temperature conditions, reducing the risk of road deformation.
Adhesive Properties: Excellent adhesion to aggregates, providing strong and durable road surfaces.
Waterproofing: Superior water resistance, protecting the pavement from water damage and extending the lifespan of roads.
Durability: High resistance to aging and weathering, ensuring prolonged service life of the infrastructure.


Applications:

Road Construction: Ideal for the construction of high-traffic roads, highways, and expressways.
Airport Runways: Ensures smooth and durable surfaces for airport runways, capable of withstanding heavy loads.
Paving: Suitable for various paving applications, including urban roads, rural roads, and parking lots.
Waterproofing: Used in waterproofing membranes and roofing applications, providing excellent protection against moisture.


Specifications:

Penetration at 25 C: 60-70 dmm
Softening Point: 49-56 C
Flash Point: Minimum 232 C
Ductility at 25 C: Minimum 100 cm
Solubility in Trichloroethylene: Minimum 99.0%
Specific Gravity: 1.01-1.06


Packaging: Available in drums, bulk containers, or as per customer requirements.

Compliance: Bitumen Grade 60/70 meets international standards and specifications, ensuring consistent quality and performance across all applications.



Why Choose Bitumen Grade 60/70?

Proven Performance: Trusted by engineers and construction professionals worldwide for its reliability and durability.
Versatile Applications: Suitable for a wide range of paving and waterproofing projects.
High Quality: Manufactured under stringent quality control measures to meet global standards.

Bitumen

Origin - India, American & china

Packaging - 25K Bag- 55 LB's Bag

Origin - India, American & china

Packaging - 25K Bag- 55 LB's Bag

Bitumen, available in various grades, is a viscous, black, and highly sticky substance
derived from crude oil. These grades differ in viscosity, temperature susceptibility,
and application. Commonly used in road construction, waterproofing, and roofing,
bitumen's versatility extends to industrial, commercial, and residential sectors. High
grade bitumen boasts superior durability and weather resistance, ideal for heavy
traffic roads, while lower grades find use in sealing and insulation. Its ability to adhere
to various surfaces makes it indispensable in infrastructure development. With grades
tailored to specific requirements, bitumen serves as a vital component in enhancing
the longevity and performance of diverse construction projects worldwide.

Bituminous materials are organic materials, which include several types. Natural bitumen. It is a sticky substance or solid, which is made up of compounds of carbohydrates and their derivatives. Methods of its formation are the natural oxidation processes of oil polymerization

VG10,VG20,VG30,VG40 ; 60/70, 80/100, 85/100, 40/50

Commodity : Bitumen 50- 70
Type : Eastern European
Penetration : at 25°C (50-70)
Softening Point : at 0°C (46-54)
Resistance to Hardening : at 1630c
Change of Mass % : Max -0.5
Retained Penetration : Min -50
Softening Point After Hardening : Minimum Deg. C-48
Flash Point Minimum : Deg. C230
Solubility Minimum : %99
Kinematic Viscosity : at 135 Deg. C, Minimum mm2/s 295
Delivery : CIF Paranagua Port
Quantity : 200 Metric Ton (MT) Spot for Test ?? Extension 2000 MT Contract for 12 mos.

Origin: Iran

Bitumen (Penetration / Emulsion / Cutback):

Product Description:

Types of Bitumen based on their applications:

Based on their applications, bitumens can be divided into two groups:
1. road construction or thin bitumen
2. building bitumen (roof insulator) or hard bitumen

Price of product ( USD price or FOB price) :

About 90% of the produced bitumen is used in road construction activities and 10% of it is used for insulation applications.

Key Specifications/Special Features :

Penetration Grade :
ASTM D 946 - 40/50, 60/70, 80/100 
BS EN 12591 - 35/50, 50/70, 70/100

Viscosity Grade :
ASTM D3381-09 - AC10, AC20, AC30, AC40 
IS 73:2013 - VG10, VG20, VG30, VG 40

Performance Grade :
PG bitumen is bitumen which is graded based on its performance at different temperatures.

Natural Bitumen or Gilsonite :
Gilsonite in mass is a shiny, black substance, brittle and can be easily crushed into a dark brown powder.

Bitumen Emulsion :
Cationic Rapid Setting - CRS-1, CRS-2 
Cationic Slow Setting - CSS-1, CSS-1h

Cutback Bitumen :
Slow Curing - SC-70, SC-250, SC-800, SC-3000
Medium Curing - MC-30, MC-70, MC-250, MC-800, MC-3000
Rapid Curing - RC-70, RC-250, RC-800, RC-3000

pioneer to launch first time in Asia using thermal energy to melt drummed bitumen.
Wide range of models available with different capacity.
Lowest melting cost and continuous type.
Zero defect machine so minimum maintenance needed


Alltech Bitumen Drum Decanter Stationary Type Models :

Full range of Various Capacity Model Available.

Available for both size of drum.

Lowest Melting Cost.

Continuous Type.

Less Foundation work.

Pollution Free Equipment- Green Technology.

We are a refinery of Bitumen Asphalt with different penetrations like 60-70, 80-100, MC30, emulsion, and other kinds of bitumen that the buyer needs. We can produce according to specification. We can do it with different types of packing: new steel drum, 1ton Jumbo bag, and bulk.

our price:
425$ per ton / drum
410$ per ton / jumbo
343$ per ton / bulk
all price are fob BND

Bitumen Grade 60/70 And 80/100
As Per Seller Procedure only.
Dip and pay
CIF
FOB

We are providing bitumen grades: 30/40, 40/50 , 60/70 , 85/100 , 100/120 , MC-250 , R85/25 , R90/15.
Packaging can be in two forms:
- New steel drums, (N.W: 182 kg -/+ 2) (G.W:192 kg -/+ 2) ,110 drums per each 20" container
- Jumbo Bag, 1 MT in Steel Cage
Our supply capacity is 5,000 MT/Month.
Delivery time: 4 to 6 weeks.
Inspection: SGS on buyer account.

The most amount of bitumen which is used in the construction industry and road construction is also used in road and roof pavement The waterproofness and elasticity at high temperature are two perfect traits of bitumen that makes it ideal for a vast group of uses It works like an adhesive liquid at high temperatures normally between 100_ 200 and it can get mixed with the other components and get shaped if needed

Used for road construction, roofing, waterproofing and other.

Our GEO textile section, registered capital of 50.7 million yuan, covers an area of 80000 sqm, the existing staff of more than 100 people, including all kinds of professional and technical personnel more than 40 people, as a high-quality geotextile manufacturer, we provide preferential geotextile prices, looking forward to long-term cooperation with you!
Advanced production equipment, complete detection means.The company's main production equipment are using the current advanced technology, advanced craft forging.There are 5 non-woven production lines with an annual output of 10 thousand tons: tow of them is a 6.6m wide quasi-high-speed non-woven production line;With an annual production capacity of 22 million square meters, a three-layer co-extrusion line of 10 meters of geomemetic film and waterproof board is installed on the same platform.Composite geomembrane production line, woven cloth production line, needle-punched carpet production line, polyester filament geotextile production line.Has a complete, precise, reliable testing instruments and equipment, testing means complete, in line with the international ISO standards.Testing equipment mainly includes electronic fabric strength machine, eight blue oven, thickness measuring instrument, low temperature test box, punching machine, impermeable instrument, bending instrument, electric heating constant temperature blowing drying oven, melt flow rate measuring instrument, etc.Ensure that all geomaterials and carpets produced meet standards and customer requirements.

Reliable product quality, after - sale service.The main products are staple fiber needled geotextiles, polyester filament geotextiles;Needle-punched carpet, craft carpet;Geomembrane: PE film, EVA geomembrane, HDPE geomembrane, LDPE geomembrane, rough surface geomembrane, waterproof board;Composite film: two cloth a film, a cloth a film, two cloth two film composite geomembrane;Woven cloth, polypropylene woven cloth, polyethylene woven cloth, high strength woven cloth, MDF board, bitumen filler boards,bitumen wooden board,GEO bags and so on.The products are widely used in the world key projects, involving landfill sites, reservoirs, artificial lakes, water conservancy projects, high-speed railways, expressways, airports, ports and beaches and other engineering fields.The product quality of the company is stable and reliable, the price is reasonable, and the after-sales service is perfect, which has been praised by the majority of users.

Jambo bags grade 60/70
All grade's of Iranian bitumen
Grades
PG: 40/50, 60/70, 80/100
VG: VG10, VG20, VG30
MC10, MC20
etc

Bitumen grades 40/50, 60/70, 85/100 Experiences and technical knowledge in bitumen
exportation field and enjoying petroleum products experts could have exported different
kinds of bitumen either in bulk or in drum in grades of 40/50 , 60/70 and 85/100
Price: Depends on the market price
Origin: United Arab Emirates
Grades: 40/50, 60/70
Packaging: Flexi Tanks/ Barre

a. Name of product Bitumen (Penetration Grades and Viscosity Grade)

b. Price of product 275$ / MT FOB (Valid 3 days)

c. Product origin Iran, UAE, Oman, SA, Russia
d. Key Specifications/Special Features Bitumen is a hydrocarbon material with high viscosity and colloidal structure, and black to dark brown color and is completely dissolvable in Carbon Disulfide and Carbon Tetrachloride. Being impenetrable to moisture and water, electrical insulation, elasticity, moderate resistance against acids, bases and salts and adhesion to other materials are the most important features of bitumen.
The most production type of bitumen in the world is petroleum bitumen which is obtained from crude oil distillation and they are classified based on the Penetration Grade (standard ASTM-D5). Also this group is able to supply all other kinds of this product according to customer’s needs. We can supply the best bitumen that is packed in new steel drums or poly bags with the best quality and cost. We can supply and export bitumen from Jey oil refinery, Pasargad Refinery, Arak Refinery, Esfahan Refinery, Shiraz Refinery and Tehran refinery, etc based on our costumer’s request.

e. Harmonization System (HS) Code : Heading 2714 (Bitumen and Asphalt)
f. Minimum Order Size : 100 MT
g. Packaging details: New Steel Drum-Barrel, Bulk Vessel, Bituplast (Poly-bag), Bitutainer, Jumbo-bag (Poly-cube

Bitumen 60/70 Test method Unit Specification:
Specific gravity @ 25 ASTM D70 Kg/cm3 1.01/1.06,
Penetration @ 25 ASTM D5 mm/10 40/50,
Softening point ASTM D36 52/60,
Ductility @25 ASTM D113 cm 100 min,
Loss on heating(wt) % ASTM D6 wt % 0.2 max,
Drop in penetration after heating % ASTM D5-D6 % 20 max,
Flash point ASTM D92 250 min,
Solubility is CS2(wt)ASTM D wt % 99.5 min,
Spot test A.A.S.H.O.T102 Negative,
payment terms: FOB & CFR
payment method: L/C, TT
Loading port: UAE

Bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn’t mix with water and as it is sticky in nature, it doesn’t easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used. Emulsifier can be defined as a surface-active agent. Emulsifier keeps the bitumen in its fine droplet state by disallowing it to mix with other droplets. As the droplets are very fine they suspend in water.

Therefore, bitumen emulsion is a dispersed liquid consisting of three products, i.e. water, bitumen and emulsion.

Bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn’t mix with water and as it is sticky in nature, it doesn’t easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used. Emulsifier can be defined as a surface-active agent. Emulsifier keeps the bitumen in its fine droplet state by disallowing it to mix with other droplets. As the droplets are very fine they suspend in water.

Uses
Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use and can be applied in a wider range of conditions. Advantages
a) Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry.
b) Lower costs are incurred due to a considerable saving on fuel for heating purposes.

c) Operating at lower temperatures for cold mixing gives a greater margin of safety, even though these emulsions may contain fluxing oil.
d) Not only may cold mix be stockpiled for long periods, but it may also be packaged in small containers and stored. This facilitates the treatment of very small areas quickly, cleanly and economically. Disadvantages
A regular water supply is required and this can be a great problem in very hot countries, where water can be in very short supply.


Price of Product (USD) : 432

Product Origin : Merco W.L.L Bahrain

Key Specifications / Special Features :

Type Viscosity  @25°C Penetration & Solubility Residue
Tack Coat K1- 40 25 Max 60- 200 & (97.5) 38%
Rapid Setting RS-1K 20-50 60- 200 & (97.5) 50%
Rapid Setting K1-60 -NA & (97.5) 57%
Rapid Setting CRS-160- 200 & (97.5) 60%
Rapid Setting CRS-2-60- 200 & (97.5) 65%
Rapid Setting K1-70NA & (97.5) 67%
Medium Setting K2-NA & (97.5)57%
Medium Settng CMS 2-60- 200 & (97.5) 65%
Slow Setting K3 20- 100 60- 200 & (97.5) 56%
Slow Setting CSS-1 20- 100 60- 200 & (97.5) 57%


Minimum Order size and packgaing detail

16.00(=/-3%) Metric tons per 20 Foot Container. 200 kgs(+/-3kgs) in one drum.Total no of drums in 1 container 80

Bitumen penetration grade 60/70 means the penetration value is in the range 60 to 70 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction.Penetration Grade Bitumen supplied by MERCO Bahrain. Its penetration grade ( the measure of bitumen hardness) is between 60 to 70. Bitumen is specified by the penetration and softening point test.Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.

Price of Product (USD) : 503

Product Origin : Merco W.L.L Bahrain

Key Specifications / Special Features :

Test Name Test Method Unit Result
Specific Gravity @25°C ASTM D70 kg/cm³ 1.01-1.06
Penetration @25°C ASTM D5 mm/10 60/70
Softening Point °C ASTM D36 °C 49/56
Ductility @25°C ASTM D113 cm 100 min
Loss on Heating (wt%) ASTM D6 wt% 0.2 max
Drop in Penetration after heating % ASTM D5-D6 % 20 max
Flash Point °C ASTM D92 °C 232 min
Solubility in Trichlorethylene ASTM D2042 wt% 99 min
Spot Test A.A.S.H.O.T102 Negative

Minimum Order size and packgaing detail

we will provide both 20FT as well as 40FT Containers (200 Liter per drum both open as well as closed top Drums), also in 1 MT flexi bags. Steel Drum Sizes
Drum Size 200 kg Drum
Height 980mm
Diameter 520 550mm
Thickness 0.6 –0.8mm

Cutback Bitumen ( Liquid Bitumen ) is Bitumen that is dissolved in a solvent . Typical solvents include Naptha, gasoline and kerosene, white spirit etc. The type of solvent controls the curing time while the amount determines the viscosity of the Cutback Bitumen.

The advantage Cutbacks have over Emulsions is a much higher residual Bitumen percent, typically over 80% compares with over 40-65% for Bitumen emulsions. The result is more Bitumen left on the roadway after curing, for the same volume of binder applied.

Application
Cutback bitumen’s suitable for primer sealing can also be used in the manufacture ofpre-mix asphalt, which is used in patch repairs.Cutback bitumen’s are used extensively in sprayed sealingapplications, particularly in cooler weather where theyprovide improved initial stone retention due to their

Price of Product (USD) : 503

Product Origin : Merco W.L.L Bahrain

Key Specifications / Special Features :

Cutback Classification

Cutbacks are divided into two classifications, Rapid-Curing (RC) and Medium-Curing (MC) depending on the solvent used. They are further defined by a number which indicates the minimum kinematic viscosity (fluidity) of the cutback.

Grades & Properties

Grade Curing Speed Viscosity Penetration of Residue
MC 30 Medium 30-60 120- 150
MC 70 Medium 70-140 120- 150
MC 250 Medium 250- 500 120- 150
MC 800 Medium 800- 1600 120- 150
MC 3000 Medium 3000- 6000 120- 150
RC 70 Rapid 70-140 80- 120
RC 250 Rapid 250-500 80- 120
RC 800 Rapid 800- 1600 80- 120
RC 3000 Rapid 3000- 6000 80- 120


Minimum Order size and packgaing detail

Palletizing is required for Cutback Bitumen & Emulsions -200kg drums shall be secured as 4 drums per pallet.

165 LTR & 185 LTR BITUMEN STORAGE AND TRANSPORT DRUMS

Bitumen 60/70

Packing - New Drums

CFR Jebel Ali
CFR Karachi
CFR Mundra
CFR Mumbasa
CFR Chennai

High quality Bitumen 60/70 grade with rapid delivery options and GREAT! discount for long terms contracts.

BITUMEN GRADE 40/50, 60/70, 80/100

ORIGIN: KAZAKHSTAN

Minimum Quantity: 50,000 Metric Tons per month Maximum

Quantity: 500,000 Metric Tons per month � � � Price on FOB: $360.00USD GROSS / $340.00USD NET � Price on CIF:

$480.00USD GROSS /$470.00USD NET

Commission: $5Buy side. Seller side$5 50USD Per MT

Bitumen

To grade the bitumen-based on viscosity BIS revised IS-73-1992 specifications (Viscosity at 60 C) and as such there are four grades VG-10, VG-20, VG-30 & VG-40. A few qualification tests like specific gravity, water content, ductility, loss on heating & fares breaking point were removed from IS:73-1992 as these tests do not have any relationship with the performance of the product.

Viscosity Grade Bitumen is widely used in spraying applications such as surface-dressing and paving in very cold climates. It is also used to manufacture bitumen emulsion and modified bitumen products.