(HS 760719) We would like to offer: Aluminum products. Consist of: ingot, foil (blister) and extrution profile. For foil (blister), thickness: 6.0 - 30 micron. Width: 60 - 103 cm. Packaging: in roll. Application: pharmaceutical packaging, insulation, etc.. Produced under ISO 9001 certified manufacturer. Brass ingot also available. Tin ingot available too. Product of Indonesia. For any interested parties, pls kindly contact for further details. Thank you.
Aluminium Ingot A7. Origin: USA and Cameroon Payment terms: Non-transferable DLC MT 700 payable at destination port. PB 2% Specification: Grade: Al> Si Fe Cu Ga Mg Zn Mn Ti AL 99.70 % 99.70 < 0.1 < 0.12 < 0.01 < 0.03 < 0.02 < 0.03
Aluminium ingot A7 origin Indonesia
aluminium ingot. cooper cathode, concentrate.
Greetings We have aluminum ingots available in Jeddah for local buyers Donot hesitate to call me if you are interested Best wishes
Please find our AL Ingot offer here below, OFFER I / USA ORIGIN %99.70 Alloy Or Not: Non-alloy Secondary Or Not: Non-secondary Chemical Composition: Al Weight: 25kg Al (Min): 99.70% Color: silvery white Purity: 99.70%MIN MIN Quantity: 1.000MT Price: 1350USD per ton Payment: %20 will pay against proforma + %50 will pay after loading against BL+SGS & balance %30 balance pay at delivery port Loading: 7bdays after payment ***-*** OFFER II / SPAIN ORIGIN %99.90 Non-alloy Non-secondary Chemical Composition: Al Weight: 20-25kg Al (Min): 99.90% Color: silvery white Purity: 99.90%MIN MIN Quantity: 1.000MT Price: 1400USD per ton (IT CAN PAY WITH EURO CURRENCY IN BUYER OPTION) Payment: %20 will pay against proforma + %50 will pay after loading against BL+SGS & balance %30 balance pay at delivery port Loading: 7bdays after payment **-**
Product Description Aluminium thin sheet scraps are suitable to produce ingot grade AC 4 A by adding Si, Mg and reducing Mn. Aluminium elctrical wire scraps are suitable to produce ingot grade ADC 1 by adding Si, grade ADC 3 by adding Si, Mg, grade ADC 6 by adding Mg grade ADC 10, ADC 12 by adding Si, Cu. Origin :- China , Germany Payment Terms :- LC/SBLC
SOFT CORPORATE OFFER (SCO) We, Seller xxxxxxxxxxxxxxxxxxxxxxxx, as the Seller, State and Represent withfull legal and corporate responsibility that we are ready, willing and able tosupply the following commodity as per specification and quantity and forthe price and terms of payment as specified in the terms and condition asstatic below as agreed between the Seller and the buyer and issue in thisSoft Corporate Offer as follows: Description of Goods First Shipment Monthly Quantity Total Quantity Price in USD per metric Ton CIF Grade A (MT) (MT) (MT) Per MT Aluminum Ingots 99,97% Purity 50000 5000 0 600000 1500 USD Total value in the contract 1. Origin: AFRICA 2. Quantity: 50000 MT to be delivered in one lot or in any sub-lots asagreed between the Buyer and the Seller to complete 50000 MT. 3. Annual Quantity: as decided between the Buyer and the Seller from time to time. 4. Packaging: Palletized, Aluminum bands. 5. Amount to Pay for the 50000 MT X 1500USD 6. Amount to Pay per Annum: to be decided by both Buyer and Seller. 7. Specifications: Grade A Aluminum A7 Ingot 99.97% Purity given below. 8. Delivery Size & Schedule: 600000 MT to be delivered in different monthsas agreed between the Buyer and the Seller at prices given in this FCO. 9. Terms of delivery: CIF INCOTERMS 2010. 10. Payment Terms: 100% irrevocable, SBLC(MT760). (Buyer's bank within top 50 prime banks list 11. This has to be 7 days max after signing the contract 12. USD 1500 per Metric Ton 13. Commission: Included 14. Delivery: CIF 14. Shipment: the loading starts after receiving the 100% SBLC irrevocable, Confirmed and from 50 premium Banks by the Bank of the Seller. 15. inspection: inspected by International Inspection by SGS at the Seller's Expense in the port of loading. 16. Specifications: Al % Si % Cu % Mg % Fe % Mg % Zn % Ga % Others Others total 99.7 0.10 0.010 0.020 0.20 0.02 0.030 0.03 0.03 0.30 17. Shipment documents: Seller will provide the following shipment documents: A. Export Permit; B. Certificate of ownership; C. Certificate of origin; D.Packing List Certificate; E. Bill of Lading; F. Proforma invoice; G. Three original commercial invoices to Buyer; H. Packing list Certificate; I. SGS inspection Certificate; 18. Contract Period: 36 months and 1 day.
Country Of Origin: China Port of loading: Tianjin, China Goods Descriptions & Specification: Aluminum A7, ingot (99,7 Al %), UNIT PRICE (for trial order; the price for next orders will be determined each month): FOB Tianjin port, China: 1900 USD PAYMENT TERM: 100% L/C (Irrevocable, Transferable/Non-Transferrable, Divisible, Confirmed Letter of Credit) - releasing of a letter of credit and payment under L/C in favor of the Seller at the loading port (Tianjin, China) under the contract shall be made against submission of the bill of lading and upon SGS (or similar reliable company) inspection for quantity and quality.
We can supply LME registered Aluminum Ingots A7. Origin Russia. SPECIFICATIONS: Al-purity is 99.70 %. PACKING: palletized banded by Aluminum bands. PACKAGE: packed with Aluminum band in bundles. NET WEIGHT OF EACH BUNDLE: 1000-1200 kg (+/-1%) MINIMUM WEIGHT IN EACH CONTAINER: 25 MT approximately. GROSS WEIGHT OF EACH CONTAINER: 25.2 MT approximately
We have a Brazilian mine/manufacturer offering A7 - 99.7% purity level ingots, SGS or equivalent inspection at port of loading at Seller expense. CIF ASWP. 10,000 MT x 12 months contract required upto 50,000 MT per month. Non Transferable, irrevocable DLC for full order value, with payment release against shipping documents. Revolving DLC considered. 1st shipment within 45 days from receipt of DLC, all other shipments 30 days thereafter. CIF PRICE USD $1860 PER MT as of Oct 21.
Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth. Introduction Aluminum is a silver-white metal that ranks third in the earth's crust after oxygen and silicon.Aluminum is less dense, only 34.61% of iron and 30.33% of copper, so it is also called light metal.Aluminum is the world's output and usage are second only to steel non-ferrous metals.The density of aluminium is only 2.7103g/cm3, about a third of that of steel, copper or brass.Because of its light weight, aluminum is often used in the manufacture of vehicles, trains, subways, ships, airplanes, rockets, airships and other land, sea and air vehicles to reduce the dead weight and increase the loading capacity. In our daily industrial raw materials called aluminum ingots, according to the national standard (GB/T 1196-2008) should be called "remelting with aluminum ingots", but we are used to "aluminum ingots".It is produced by electrolysis with alumina - cryolite.There are two kinds of aluminum ingots after they enter into industrial application: cast aluminum alloy and deformed aluminum alloy.Casting aluminum and aluminum alloys are castings of aluminum produced by casting method;Deformable aluminium and aluminium alloys are manufactured by means of pressure processing: plates, belts, foils, tubes, rods, moulds, wires and forgings.According to the national standard, "aluminum ingots for remelting are divided into 8 grades according to chemical composition, namely Al99.90, Al99.85, Al99.70, Al99.60, Al99.50, Al99.00, al99.7e, al99.6e" (note: the number after Al is the aluminum content).
Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth. Introduction Aluminum is a silver-white metal that ranks third in the earth's crust after oxygen and silicon.Aluminum is less dense, only 34.61% of iron and 30.33% of copper, so it is also called light metal.Aluminum is the world's output and usage are second only to steel non-ferrous metals.The density of aluminium is only 2.7103g/cm3, about a third of that of steel, copper or brass.Because of its light weight, aluminum is often used in the manufacture of vehicles, trains, subways, ships, airplanes, rockets, airships and other land, sea and air vehicles to reduce the dead weight and increase the loading capacity. In our daily industrial raw materials called aluminum ingots, according to the national standard (GB/T 1196-2008) should be called "remelting with aluminum ingots", but we are used to "aluminum ingots".It is produced by electrolysis with alumina - cryolite.There are two kinds of aluminum ingots after they enter into industrial application: cast aluminum alloy and deformed aluminum alloy.Casting aluminum and aluminum alloys are castings of aluminum produced by casting method;Deformable aluminium and aluminium alloys are manufactured by means of pressure processing: plates, belts, foils, tubes, rods, moulds, wires and forgings.According to the national standard, "aluminum ingots for remelting are divided into 8 grades according to chemical composition, namely Al99.90, Al99.85, Al99.70, Al99.60, Al99.50, Al99.00, al99.7e, al99.6e" (note: the number after Al is the aluminum content).
Our company produces aluminum ingots by processing used aluminum materials, such as beverage cans, used aluminum foil, medicine and food wrappers, aluminum machining scraps, etc. We sell according to what is like the sample to be sent. We cannot confirm the exact composition because we produce from recycled raw materials, but our product prices are much cheaper than our competitors. The aluminum we produce is indeed suitable for use as raw material for the aluminum industry, for reprocessing.
1.)Alloy:1070 Â 2 Temper: HO 3. Thickness: 2mm-40mm 4. Diameters:6mm-500mm 5. Package: Nylon bags or Cartons The slugs are widely used for the manufacturing of electrolytic capacitors, aluminum containers or Collapsible Aluminium tubes for cosmetics, pharmaceutical, beverage containers, and many other packaging solutions.
CHONGQING EXCEED METAL CO.,LTD supplies aluminium discs in a wide variety of sizes and alloys. Two state-of-the-art disc blanking presses combined with open throat shear processing enable our facilities to supply a diverse range of markets. 1.)Alloy: 1100,1050,1060, 1070, 1200, 3003, 3004, 3105, 5052, 6061, 8011 2.) Temper: HO H12 H14 H16 H18 H22 H24 H26 H32 T6 3.)� Thickness: 0.3mm  6.0mm 4. Diameters : 80mm - 1100mm 5.) Package: wooden pallet, wooden case Aluminium discs are specialized products that are mostly used in the production of cookwares, utensils, traffic signals, lighting lampshade, stock pots, kettles etc. Our metallurgical processes ensure availability of deep drawing and spinning quality specifications that match these demanding applications.
Aluminum Ingost for export, origin from Thailand.
Antimony ingot, commonly known as refined antimony. Use ANTIMONY INGOT supplier is mainly used as the hardener of alloy for metallurgy, storage battery and military industry, as well as the raw material for producing antimony oxide. Antimony ingot is also used in movable type printing industry, lead material, cable sheath, solder and sliding bearing. Antimony products are primarily refined antimony and antimony compounds, namely antimony trioxide, etc.The primary role of antimony in alloys is to add hardness, often referred to as metal or alloy hardener.Antimony and antimony compounds are used in wear - resistant alloys, printing type alloys and ordnance industries.With the development of science and technology, antimony is now widely used in the production of a variety of flame retardants, enamel, glass, rubber, paint, pigment, ceramics, plastics, semiconductor components, fireworks, medicine and chemical industry and other occupations.� Reserves and distribution Refined Antimony content in the earth's crust is 0.0001%, and according to 2014 data from the U.S. geological survey, global antimony reserves are about 1.8 million tons.There are as many as 120 antimony minerals known, but only 10 antimony minerals with industrial value and containing more than 20% antimony are known.
Use of ALUMINUM ALLOY INGOT All kinds of aircraft use aluminum alloy as the main structural material.The skins, beams, ribs, trusses, compartments and landing gear of aircraft can all be made of aluminum.The amount of aluminum used in an aircraft varies, depending on its purpose.The aluminum alloy used in Boeing 767 passenger plane accounts for about 81% of the body structure weight.For example, the f-15 high performance fighter with a maximum flight speed of Mach 2.5 only USES 35.5% aluminum alloy.Some aluminum alloys have good low temperature performance, at -183 ~ -253[2oc] is not cold and brittle, can work in liquid hydrogen and liquid oxygen environment, it does not react with concentrated nitric acid and partial dimethylhydrazine, has good welding performance, therefore it is a good material for making liquid rockets.The fuel tanks, oxidizer tanks, intertank, interstage, tail and instrument compartments of the Saturn 5 launch vehicle that launched the Apollo spacecraft were all made of ALUMINUM ALLOY INGOT. The crew compartment, forward fuselage, middle fuselage, aft fuselage, vertical tail, flaps, elevons, and horizontal tail are all made of aluminum.The main structural material of various man-made earth satellites and space probes is also aluminum.
Use of ALUMINUM ALLOY INGOT All kinds of aircraft use aluminum alloy as the main structural material.The skins, beams, ribs, trusses, compartments and landing gear of aircraft can all be made of aluminum.The amount of aluminum used in an aircraft varies, depending on its purpose.The aluminum alloy used in Boeing 767 passenger plane accounts for about 81% of the body structure weight.For example, the f-15 high performance fighter with a maximum flight speed of Mach 2.5 only USES 35.5% aluminum alloy.Some aluminum alloys have good low temperature performance, at -183 ~ -253[2oc] is not cold and brittle, can work in liquid hydrogen and liquid oxygen environment, it does not react with concentrated nitric acid and partial dimethylhydrazine, has good welding performance, therefore it is a good material for making liquid rockets.The fuel tanks, oxidizer tanks, intertank, interstage, tail and instrument compartments of the Saturn 5 launch vehicle that launched the Apollo spacecraft were all made of ALUMINUM ALLOY INGOT. The crew compartment, forward fuselage, middle fuselage, aft fuselage, vertical tail, flaps, elevons, and horizontal tail are all made of aluminum.The main structural material of various man-made earth satellites and space probes is also aluminum.
