Porous titanium sheets are highly desirable for use as the porous transport layer (PTL) in polymer electrolyte membrane (PEM) water electrolyzers. However, the passivation of titanium leads to an increase in surface contact resistance, thereby negatively affecting the performance of the electrolyzer. To address this issue and ensure long-term operation, a common approach is to apply platinum or gold coatings on titanium-based PTLs. Parameters Material: Sintered Porous Titanium Sheet Coating: Platinum (Pt) The thickness of platinum: 1 micron Porosity: Customizable, commonly between 30% and 40% Pore Size: 10 microns Size: 46*46* 2mm Features Enhanced Conductivity: The platinum coating on sintered porous titanium sheets provides excellent electrical conductivity, facilitating efficient electron transfer during electrochemical reactions. Durability and Corrosion Resistance: Titanium's inherent corrosion resistance, combined with the protective platinum coating, ensures prolonged electrode lifespan, even in aggressive chemical environments. High Surface Area: The porous structure of the titanium sheets offers a large surface area, enabling more active sites for electrochemical reactions and enhancing cell efficiency. Customizable Pore Size: The pore size of sintered porous titanium sheets can be tailored to specific applications, allowing for optimized mass transport and improved electrolyte flow. Applications Chlor-Alkali Industry Water Treatment Fuel Cells Electrosynthesis
In PEM fuel cells, 0.5microns sintered porous Ti plate for PEM is commonly used as electrode materials for anodes and cathodes. It has high electrical conductivity and good chemical stability, and is suitable for the occurrence of electrode reactions. 0.5microns sintered porous Ti plate acts as both anode and cathode electrodes in PEM fuel cells. It provides the supporting structure of the catalyst layer and provides a conductive path for the oxidation reaction of hydrogen and the reduction reaction of oxygen, thereby realizing the electrochemical reaction of fuel and oxygen and generating electricity. Parameters Material: pure titanium powder Technical: sintering and coating Size:as drawing Porosity:30-40% Pore size:0.5microns Advantages High electrical conductivity: The sintered porous titanium plate has good electrical conductivity and can effectively conduct electrons. This is crucial for the electrode reaction to proceed, ensuring smooth transport of electrons between the anode and cathode. High surface area: The porous structure of the sintered porous titanium plate provides a large amount of surface area, increasing the contact area with the catalyst reaction. This increases the reaction rate and enhances the efficiency of the electrochemical reaction between fuel and oxygen. Good chemical stability: Sintered porous titanium plate has good chemical stability and can resist corrosion under acidic environment and high temperature conditions. This makes it work stably for a long time in PEM fuel cells. Suitable for catalyst immobilization: The surface of sintered porous titanium plate can accommodate and immobilize catalysts, such as platinum or its alloys. This provides good catalytic activity and maintains catalyst stability and dispersibility. Strong adaptability: The sintered porous titanium plate can be customized in shape and size according to needs, so as to adapt to fuel cell stack designs of different sizes and forms. It can also be used in combination with other materials to achieve better electrode performance. There are several commonly used materials that can be used in combination with sintered porous titanium plates to enhance electrode performance, the following are some of these common combinations: Platinum Catalyst Carbon materials Oxide Conductive polymers Transition metal nitrides
Titanium bipolar electrolyser plate in electrolysis is a special electrode for electrolysis, usually made of pure titanium. In electrochemical processes, electrodes are usually divided into anodes and cathodes, each responsible for the flow of electrons and the flow of ions. A bipolar plate is an electrode that has both anodic and cathodic properties. Parameters Material: Gr1 titanium Size: Customized according to the drawing Application: Fuel cell Features 1.Good electrical conductivity: Titanium bipolar plates have excellent electrical conductivity and can withstand high voltage and high current density, thus effectively promoting electrochemical reactions. 2.Good corrosion resistance: Titanium bipolar plates have good corrosion resistance and can be used in harsh environments such as strong acid, strong alkali, high temperature and high pressure, and are not easily corroded and worn. 3.Good mechanical properties: Titanium bipolar plates have high strength and rigidity, can withstand large forces and pressures, and are not easily deformed and broken. 4.Lightweight: Titanium bipolar plates have a lower density and are a lightweight material that can reduce the weight of the entire electrolytic cell and improve overall efficiency. Methods of coatings for Ti bipolar plates A number of methods are used to deposit coatings onto metallic bipolar plates. Processes include physical vapor deposition techniques such as electron beam evaporation, sputtering and glow discharge decomposition, chemical vapor deposition techniques, and liquid phase chemical techniques such as electroplating and electroless deposition, chemical anodizing/oxidation coatings and painting. Processing Titanium bipolar plates can be manufactured by CNC machining, hydraulic forming and stamping, and photochemical etching.
Platinum-coated porous titanium plates are essential components used in electrolyzers for diverse industrial applications such as hydrogen production, water treatment, and energy storage. These plates play a critical role in facilitating efficient and reliable electrochemical reactions. Specifications: Material: porous Titanium plate Coating: Platinum (usually 0.2-5 microns thick) Porosity: 30%-40% Thickness: 0.6-20 mm Dimensions: Customizable based on specific electrolyzer requirements Surface Area: Varies based on design and application, usually 50-100 cm�² Features: Catalytic Efficiency: The platinum coating on the porous titanium plates provides exceptional catalytic activity, enabling rapid and efficient electrochemical reactions. This results in improved performance and higher reaction rates, contributing to the overall efficiency of the electrolyzer. Corrosion Resistance: Titanium is inherently resistant to corrosion, and the platinum coating further enhances this property, ensuring the longevity and stability of the plates even in harsh operating conditions. This resistance to corrosion guarantees the durability and reliability of the electrolyzer system. Enhanced Mass Transfer: The controlled porosity of the titanium plates facilitates effective gas diffusion and reactant accessibility. This feature enhances mass transfer, allowing for faster reaction kinetics and improved overall electrolyzer performance. Customizable Dimensions: Platinum-coated porous titanium plates can be customized to meet specific electrolyzer design requirements. The dimensions can be tailored to fit different system sizes and configurations, ensuring compatibility and versatility in various applications. Application: Hydrogen Production Water Treatment Energy Storage
Ultra-thin 0.6mm titanium porous transfer layer for hydrogen has a wide range of applications in hydrogen industry. In the hydrogen industry, these plates are used for hydrogen purification and separation, and they are an important component in many hydrogen-based technologies. Ultra-thin 0.6mm titanium porous transfer layer for hydrogen has good electrical conductivity, gas permeability, liquid permeability and chemical stability. In electrochemical systems such as fuel cells, the application of porous titanium plates can improve the energy conversion efficiency and stability of electrochemical systems, thereby promoting the development and application of electrochemical systems. Parameters Material: Gr1 titanium powder Purity: 99.6% Thickness:0.6mm Size: customized Application: PTL GDL in PEM electrolyzer Porosity: 35% Pore size: 20um Features High conductivity: Titanium is a good conductive material, and the porous titanium plate has excellent conductivity and can effectively transport electrons. High gas permeability: The porous titanium plate can control the parameters such as pore size and porosity to make it have high gas permeability, so that it can effectively transmit gases such as hydrogen and oxygen. Good liquid permeability: The pore structure of the porous titanium plate can control the transmission of liquid, so that it has high liquid permeability. High chemical stability: Titanium has good chemical stability and can operate stably for a long time in acidic or alkaline environments. Applications Hydrogen energy industry Gas filtration Oil and liquid filters Muffler Fuel Industry Catalyst filtration
Mixed-metal Coated Titanium Anodes for Trivalent Chromium Plating is a material used as an anode in an electrochemical reaction, and it is usually made of pure titanium or a titanium alloy. During the electrochemical reaction, Mixed-metal Coated Titanium Anodes for Trivalent Chromium Plating absorbs electrons and is oxidized, forming an oxide coating on its surface, commonly known as titanium anodic oxide (TAO). Parameter Substrate material: titanium Grade 1, titanium Grade 2 Dimensions: customer drawing welcomed Shape: Plate/Tube/Rod/Mesh shape MMO coating: Ir-Ta coating Coating thickness: 0.2-12m Temperature:
With the rapid advancement of technology, particularly in aerospace and other related industries, the demand for titanium metal has significantly increased. However, this has also resulted in a substantial amount of titanium metal scrap. As a result, the recovery of titanium metal scrap has become crucial in conserving resources and reducing costs. Titanium scrap comes from various sources, such as during the production of sponge titanium. The upper skin, bottom, and sides of sponge titanium may be contaminated by impurities like iron, chlorine, oxygen, and nitrogen. These impurities make the titanium scrap unsuitable for manufacturing and must be recycled. Additionally, titanium ingot casting and processing titanium materials into titanium products also generate titanium scrap. To recycle titanium metal scrap, the following methods can be employed: High-quality uncontaminated titanium scrap can be utilized as an additive for smelting titanium ingots or mixed with sponge titanium to produce titanium blocks. Waste titanium sponges, heads, and scraps can be utilized as alloy additives in the ferrotitanium industry or raw materials for titanium powder, depending on their purity and composition. Waste titanium powder can be utilized as deflagration agents in the pyrotechnic sector, additives in the processing of aluminum, and raw materials for titanium products made using powder metallurgy. Titanium scrap with numerous impurities can be processed into high-titanium iron. What is the process for recycling titanium scrap? The process of recycling titanium scrap typically involves the following steps: Collection and sorting: Titanium scrap is collected from various sources, such as manufacturing facilities, aerospace companies, and medical facilities. The scrap is then sorted based on its composition and quality. Cleaning and preparation: The titanium scrap is cleaned and prepared for processing. This may involve removing any impurities, such as oil or dirt, and cutting the scrap into smaller pieces. Melting: The titanium scrap is melted in a furnace at high temperatures. This process helps to separate titanium from any other metals or materials that may be present. Refining: The melted titanium is refined to remove any remaining impurities and improve its quality. This may involve adding other materials, such as aluminum or vanadium, to improve the properties of the titanium. Forming: The refined titanium is then formed into various shapes and products, such as sheets, bars, or wire. These products can be used in a wide range of applications, including aerospace, medical, and automotive industries.
Titanium foil is a thin sheet of titanium metal that is typically less than 0.1 millimeters thick. Titanium foil is produced through a process known as rolling, which involves passing a titanium ingot through a series of rollers to gradually reduce its thickness. The resulting titanium foil is typically very thin, with a thickness ranging from a few micrometers to a few millimeters. Titanium foil is valued for its high strength-to-weight ratio, excellent resistance to corrosion, and biocompatibility with the human body. Parameter Mateial: titanium Grade: Gr 1, 2, 5(6Al-4V), 7(Ti-0.15Pd), 9(3Al-2.5V), 12, 23(6AL-4V ELI), 15V-3Al-3Sn-3Cr Thickness: 0.01-0.1mm Wideth: 10-500mm,customized Length: 10-1000mm, customized Processing Service: Bending, Welding, Decoiling, Cutting, Punching Standard: ASTMB265 Ti Content (%): 99.6% Features 1.High strength-to-weight ratio: Titanium is known for its high strength-to-weight ratio, which means that it is strong but also lightweight. This makes it ideal for applications where weight is a critical factor, such as aerospace and sporting goods. 2.Excellent corrosion resistance: Titanium has excellent resistance to corrosion, which makes it useful in harsh or corrosive environments, such as marine or chemical processing applications. 3.Biocompatibility: Titanium is biocompatible, which means that it is not harmful to living tissue or the human body. This makes it useful for medical implants such as dental implants, joint replacements, and pacemakers. 4.Low thermal expansion: Titanium has a low coefficient of thermal expansion, which means that it does not expand or contract significantly with changes in temperature. This makes it useful in applications where dimensional stability is important, such as precision engineering. 5.High melting point: Titanium has a high melting point of 1,668C (3,034F), which means that it can withstand high temperatures without melting or degrading. This makes it useful in high-temperature applications such as jet engines and furnace components. 6.Good electrical conductivity: Titanium has good electrical conductivity, which makes it useful in electronic applications such as capacitors and batteries. 7.Ductility: Titanium is ductile, which means that it can be easily formed into different shapes without cracking or breaking. This makes it useful in applications where complex shapes are required, such as aerospace components.
Titanium sponge is an elemental form of titanium that typically appears as light grey particles or a sponge-like mass. It serves as the fundamental raw material for the production of titanium materials, titanium powder, and other titanium products. Sponge titanium is obtained by transforming titanium ore into titanium tetrachloride, which is then reacted with metallic magnesium to yield a porous, sponge-like mass. Products Parameters Grade No. Ti MIN Fe Si Cl C N O Mn Mg H Ni Cr Others Brinell Hardness HBW/10/1500/30 0A MHT95 99.8 0.03 0.01 0.06 0.01 0.01 0.05 0.01 0.01 0.003 0.01 0.01 0.02 95 0 MHT100 99.7 0.04 0.01 0.06 0.02 0.01 0.06 0.01 0.02 0.003 0.02 0.02 0.02 100 1 MHT110 99.6 0.07 0.02 0.08 0.02 0.02 0.08 0.01 0.03 0.005 0.03 0.03 0.03 110 2 MHT125 99.4 0.10 0.02 0.10 0.03 0.03 0.10 0.02 0.04 0.005 0.05 0.05 0.05 125 3 MHT140 99.3 0.20 0.03 0.15 0.03 0.04 0.15 0.02 0.06 0.01 0.05 140 4 MHT160 99.1 0.30 0.04 0.15 0.04 0.05 0.20 0.03 0.09 0.012 160 5 MHT200 98.5 0.40 0.06 0.30 0.05 0.10 0.30 0.08 0.15 0.03 200 Features High strength-to-weight ratio: Titanium sponge is perfect for use in aerospace and military applications where weight reduction is important because of its high strength-to-weight ratio. Excellent corrosion resistance: Titanium sponge is highly resistant to corrosion, even in harsh environments. Biocompatibility: Titanium sponge is biocompatible, making it an ideal material for use in medical implants and devices. Heat resistance: Titanium sponge has a high melting point and is highly resistant to heat, making it ideal for use in high-temperature applications. Applications Defense and aerospace: Due to its superior corrosion resistance and high strength-to-weight ratio, the titanium sponge is frequently utilized in the defense and aerospace industries. Chemical and Petrochemical: Titanium sponge is used in the chemical and petrochemical industries due to its excellent corrosion resistance. It is used in heat exchangers, pressure vessels, and reactors. Medical: Titanium sponge is biocompatible, making it ideal for use in medical implants and devices, such as dental implants, joint replacements, and pacemakers. Sports equipment: Titanium sponge is used in sports equipment, such as golf clubs, tennis rackets, and bicycle frames, due to its high strength-to-weight ratio. Jewelry: Titanium sponge is used in jewelry making due to its unique properties, such as its light weight and corrosion resistance.
Titanium powder corrugated plates are commonly used in heat exchangers, where they help to improve the efficiency of heat transfer between fluids by increasing the contact area between the fluids and the plate surface. They are also used in the chemical and petrochemical industries, as well as in the aerospace and marine industries, due to their resistance to corrosion and high strength-to-weight ratio. Parameter Material: pure titanium, Ti-6Al-4V,Ti-3Al-2.5V Length: Max. 1000mm Width: Max.600mm Thickness: Max. 50mm Pore size: 0.2-60um Wave height: 0.2mm,0.3mm or customized Wave width: 1.2mm,1.3mm or customized Wave pitch: 0.7mm,0.8mm or customized The main steps for manufacturing titanium corrugated plate using titanium powder metallurgy process include: Titanium powder preparation: First, the titanium powder needs to be prepared into appropriate particle size and shape for further processing. Additive mixing: Mix the titanium powder with other additives such as copper, aluminum, etc. to improve the workability and mechanical properties of the titanium powder. Pressing and forming: Put the mixed titanium powder and additives into a mold for pressing and forming. This process needs to be carried out under high pressure, usually between 100MPa to 2000MPa. Sintering: Sinter the pressed and formed titanium powder at high temperature to make it into an integrated titanium corrugated sheet. This process needs to be carried out in an inert atmosphere to avoid oxidation. Heat treatment and surface treatment: After sintering, the titanium powder corrugated sheet needs to undergo heat treatment and surface treatment to improve its mechanical and corrosion resistance properties. Features 1.Stability under high temperature and high pressure: Titanium powder corrugated sheet can maintain stability and strength under high temperature and high pressure, and can therefore be used for filtration and separation in harsh environments such as high temperature, high pressure, and strong corrosion. 2.High filtration efficiency: The corrugated structure of titanium powder corrugated sheet can increase its surface area, thereby improving its filtration efficiency and capture capacity, especially suitable for applications that require high-efficiency filtration and separation. 3.Good mechanical properties: Titanium powder corrugated sheet has high strength, high hardness, and good ductility, and can withstand large mechanical stress and deformation. 4.Good corrosion resistance: Due to the use of titanium powder metallurgy process in the manufacture of titanium powder corrugated sheet, its material composition and structure can be controlled, thereby improving its corrosion resistance. 5.Easy to clean and maintain: The corrugated structure of titanium powder corrugated sheet can increase its surface area, making it easy to clean and maintain, reducing maintenance costs and time.
Constituent part an electrolytic circuit board and two electrodes (a cathode and an anode) which consists of a system that uses electricity to break water into hydrogen and oxygen in a process called electrolysis. Electrolytic circuit board: Patented medical grade electrolytic water technology can accurately control the current. Electrodes: Gr1 Titanium, nano-coating and high sintering, coated with Platinum, Iridium, Ruthenium. Superior corrosion resistance and high electrolytic rate. Application: smart toilet, bathtub, mopping machine, washing machine, dental irrigator, household dishwasher, etc.
In an electrolyzer, why not utilize a carbon-based Gas Diffusion Layer? Using a carbon-based gas diffusion layer (GDL) in an electrolyzer can pose several challenges. The presence of oxygen ions and voltage on the anode side of the electrolyzer can cause the carbon in the GDL to be oxidized, resulting in the generation of CO2 gas. While this can initially lead to a lower electrolysis voltage, the consumption of the carbon GDL is a short-lived phenomenon. As a result, the stack compression decreases, leading to higher resistance and lower performance. Therefore, it is not advisable to use a carbon-based GDL in an electrolyzer. Parameters Place of origin: Baoji, China Brand: TOPTITECH Filtration precision:0.2um-100um Material: titanium Working temperatureï¼?â?¤ 300â?? Length: 30-1000mm(More than 1000mm can be welded) Thickness: â?¥0.5mm FEATURES High corrosion resistance: Titanium is a highly corrosion-resistant material, making it suitable for use in harsh environments. High strength-to-weight ratio: Porous titanium plates are lightweight yet strong, making them ideal for applications where weight is a concern. High porosity: The porous nature of titanium plates allows for efficient diffusion of gases, making them well-suited for use in electrolyzers and fuel cells. Customizable properties: The pore size and distribution of porous titanium plates can be tailored to meet specific application requirements, allowing for greater flexibility in design. Excellent thermal conductivity: Titanium has a high thermal conductivity, which allows for efficient heat transfer and thermal management in fuel cells and electrolyzers. Long service life: Due to its corrosion resistance and durability, porous titanium plates have a long service life, reducing maintenance and replacement costs. Ease of manufacturing: Porous titanium plates can be manufactured using a variety of techniques, including sintering, powder metallurgy, and electrochemical etching, making them easy to produce in large quantities and at a reasonable cost.
The Porous titanium round plate Diffusion Layer Hydrogen Electrode is made from a porous titanium material that allows the hydrogen gas to diffuse through the material and collect at the surface of the electrode. This diffusion layer helps to increase the efficiency of the hydrogen generator, as it allows for a greater surface area of the electrode to be exposed to the electrolyte, which in turn increases the amount of hydrogen that can be generated. Parameters Filtration precision:0.45um 80um Application: The hydrogen industry, Hydrogen Fuel Cell industry, instruments and apparatus, etc. Temperature resistance:300 (wet) Sheet dimension range:0.8-2.5mm Thickness x
Sintered porous titanium plates are a form of material made from titanium powder that has been heated and crushed to produce a particularly porous and light structure. These plates have a high strength-to-weight ratio and are resistant to corrosion and wear. Parameters Material: titanium Porosity: 30%-40% Pore size: 1um-50um Thickness: above 1mm DI: 1MM above Features 1.High Strength-to-Weight Ratio. 2.Corrosion Resistance. 3.Biocompatibility. 4.Customizable Pore Size and Distribution. 5.High Temperature Resistance. Application Chemical Industry: Sintered porous titanium plates are used in chemical processing equipment, such as filters and catalysts, due to their resistance to corrosion and customizable pore size. Medical Industry: Sintered porous titanium plates are used in medical implants and prosthetics such as bone substitutes and dental implants� due to their biocompatibility, strength, and durability. Energy Industry: Sintered porous titanium plates are used in fuel cells and batteries due to their high strength-to-weight ratio and ability to conduct electricity. Environmental Industry: Sintered porous titanium plates are used in water treatment systems and air filters due to their customizable pore size and distribution and resistance to corrosion. Processing The processing of sintered porous titanium plates involves several steps. First, the high purity of titanium powder will be sieved and then mold pressed into a desired shape. Then the material is heated in a furnace to sinter the titanium particles together to form a solid structure. The final product is then machined to the desired shape and size.
A porous titanium plate is a type of material made from titanium that has many small holes or pores throughout its surface. These pores can range in size from a few micrometers to several millimeters, depending on the manufacturing process and the intended use of the plate. Porous titanium plates are commonly used in a variety of applications, including biomedical implants, filtration systems, and catalytic converters. One of their most important properties is their high surface area-to-volume ratio, which allows for efficient mass transfer and gas exchange. Parameters Material: titanium sponge Porosity: 35% Filtration rate: 0.22mm- 100mm Thickness: above 1mm Size: square round and customized with the drawing Features Versatile pore structure: The pore structure of porous sintered titanium plates can be varied to achieve different properties. For example, plates with a larger pore size may have a higher permeability, while plates with a smaller pore size may have a higher particle retention. Customized shape and size: Porous sintered titanium plates can be manufactured in a variety of shapes and sizes to suit specific application requirements. This allows for customized designs that can optimize performance and minimize material waste. Environmental sustainability: Porous sintered titanium plates can be recycled and reused, making them an environmentally sustainable choice. Additionally, the manufacturing process can be optimized to minimize waste and energy consumption. Applications in energy production: Porous sintered titanium plates can be used in energy production applications such as fuel cells and batteries. The high surface area-to-volume ratio of the plates allows for efficient gas exchange and can enhance the performance of these devices. Applications Porous titanium plates are commonly used in a variety of applications, including biomedical implants, filtration systems, and catalytic converters. One of their most important properties is their high surface area-to-volume ratio, which allows for efficient mass transfer and gas exchange. In biomedical applications, porous titanium plates are often used as bone implants or scaffolds to promote bone regeneration. The porous structure of the plate allows for the growth of new bone tissue into the implant, which can help to repair or replace damaged bones. In filtration systems, porous titanium plates can be used as a high-performance filter media due to their ability to trap and remove small particles and impurities from fluids. In biomedical applications, porous titanium plates are often used as bone implants or scaffolds to promote bone regeneration. The porous structure of the plate allows for the growth of new bone tissue into the implant, which can help to repair or replace damaged bones.
Sintered titanium plate is a kind of titanium product, which is widely used in various industries such as chemical industry, medical treatment and food processing due to its excellent corrosion resistance and high strength. The porous titanium plate produced using the sintering process is to press the titanium powder into the desired shape and then sinter at high temperature. Product parameters Filtration grade: 0.2-100um Thickness: above 1mm Shape: square, round, shaped Size: 300 800mm can be customized Pressure: 0.2Mpa Features 1. High strength and toughness: During the sintering process, the titanium powder particles are closely combined with each other, so that the sintered titanium plate has high strength and toughness, and can withstand certain impact and pressure. 2. Excellent corrosion resistance: Titanium itself has good corrosion resistance, and a uniform microporous structure can be formed through sintering, which further improves the corrosion resistance of titanium plates. 3. Can be made into complex shapes: through the sintering process, titanium sheets of various complex shapes and pore diameters can be made to meet the needs of different industries and applications. 4. Adjustable pore size and porosity: By adjusting the sintering process parameters, the pore size and porosity of the titanium sheet can be controlled to obtain the performance required for different applications such as filtration, separation, and adsorption. Applications 1. Used as a filter; 2. Utilize the function of its pores to manufacture porous electrodes, fire extinguishing devices, antifreeze devices, high temperature resistant nozzles, etc. Porous electrodes are mainly used in electrochemistry. The fire extinguishing device uses its anti-flow effect to prevent explosions, such as flame explosion arresters for gas welding. The antifreeze device utilizes its holes to feed preheated air or special liquid to prevent the wings and empennage from freezing. The high temperature resistant nozzle uses the principle of sweating on the surface to cool the hot surface, which is called sweating material. 3. Porous titanium is also a good porous electrode material for water electrolysis, and it can be coated with platinum, iridium, ruthenium and other metals to enhance its electrochemical performance. The current PEM water electrolysis hydrogen production equipment widely uses porous titanium plate as its anode diffusion electrode material. How to purchase porous sintered titanium plate A. Materials to be delivered; B. Corrosion problems; C. Special operating conditions involving pressure, temperature, etc.; D. Pollutants encountered; E. Required shape, dimensions and tolerances; F. Required flow and pressure allowed by the filter unit.
Sintered porous titanium plate is a porous material made of titanium powder that is compressed and heated to create a solid block. The block is then treated with acid or other chemicals to remove any remaining impurities and create a porous structure. Product parameters Aperture size: 0.1~3mm Porosity: 30% 60% Thickness: 0.5mm 6mm Specific surface area: 100 1000m2/m3 Tensile strength: 300 600MPa Thermal conductivity: 2 20W/mK Application fields: widely used in aviation, automobiles, medical equipment, biological materials, filter materials and other fields Features 1. Efficient transmission of hydrogen: The highly porous structure of the porous titanium plate enables the effective transmission of hydrogen and has good gas transmission performance, which can significantly improve the efficiency of the water electrolysis hydrogen production system. 2. Lightweight and corrosion-resistant: The porous titanium plate is light in weight and is very suitable for making the transmission layer. At the same time, the titanium material can resist the corrosion of many acidic and alkaline media, and has a long life and stable performance. 3. Easy to clean: The porous titanium plate has a large opening rate and a large surface area, which is easy to clean and handle, and can effectively reduce the pollution of the water electrolysis hydrogen production system and reduce the impact on the environment. 4. Highly stable: The porous titanium plate has a long service life and high stability, and can keep its pore structure and performance unchanged, further improving the stability of the hydrogen production system, thereby meeting various needs of industrial and scientific laboratories. other apps 1. Medical field: Porous titanium plate has good biocompatibility and mechanical properties, and is widely used in medical fields such as orthopedics and dentistry, as artificial bone and dental implants. 2. Energy storage field: The large surface area and pore structure of porous titanium plates make them potential applications in capacitors, which can be used in the manufacture of electronic devices such as batteries and capacitors. 3. Sewage treatment field: The high specific surface area and good catalytic performance of porous titanium plates can be used in the field of sewage treatment, such as the oxidative degradation of organic wastewater and the adsorption of metal ions. 4. Environmental field: Porous titanium plates can be used to clean harmful gases and odorous substances in the atmosphere, and can also be used in environmental protection fields such as seawater desalination and water resource utilization. 5. Aerospace field: The lightweight and high strength of porous titanium plates can be used in the aerospace field, such as manufacturing aircraft, satellites and other components.
Titanium electrode plate for water treatment is a platinum group noble metal oxide with high electrocatalytic performance, strong oxidation resistance and good electrical conductivity coated on a pure titanium substrate, which is an insoluble anode. Product parameters Product name: Titanium electrode plate for water treatment Brand: TOPTITECH Product base material: Gr1 pure titanium Product coating: Ru/Ir/Pt (ruthenium iridium platinum) Product process: nano coating - high temperature sintering Specifications: customized according to customer requirements Product performance: 1. It has excellent properties such as corrosion resistance, high temperature resistance, high strength, easy guarantee of filtration accuracy, and easy regeneration; The plates is sintered at high temperature, so the surface particles are not easy to fall off; in the air the temperature in use can reach 300�°C; 2. It is suitable for filtering various corrosive media, such as: weak hydrochloric acid, sulfuric acid, hydroxide, sea water, aqua regia, and chloride solutions such as iron, copper, and sodium; 3. It has excellent mechanical properties, can be machined for cutting, welding, etc., has high compressive strength, and the internal pressure breaking strength is as high as 0.3MPa; 4. The regeneration method is simple and can be reused after regeneration. Applications 1.Production of sodium hypochlorite via electrolysis in the chlorate and chlor-alkali industries In the production of chlor-alkali, pure saturated salt water is used as electrolytic solution, titanium electrode is used as anode, and asbestos wool attached to iron mesh is used as cathode. The anode chamber produces chlorine gas, and the cathode chamber produces hydrogen gas and sodium hydroxide. After purification, it is widely used in various industries. in industrial production. 2. Electrolyzed functional water Water that has been artificially treated to achieve a variety of beneficial purposes is referred to as functional water. With its high practicability, good sterilization effect, and lack of secondary pollution, electrolyzed water is a well-liked sterilization treatment technique. Titanium electrodes, which are frequently used in electrolyzed water machines, are used to electrolyze drinking water or trace salt water in order to generate functional water. 3. Cathodic protection In the ocean, ship hull, bridge and other steel use environments, due to the corrosion of impurities in the steel and micro-batteries, coupled with the complex natural environment, although corrosion-resistant alloy steel is selected and the thickness of the material is increased to coat excellent corrosion-resistant paint, these The corrosion of structures is still very serious, which poses a great threat to safe production, and cathodic protection is a convenient and important measure to effectively protect permanent steel structures in the ocean.
As a new type of green energy, hydrogen energy is a new type of green energy, and its sustainable manufacturing has become the goal of the industry. Water electrolysis hydrogen production, hydrogen generators, etc., hydrogen energy equipment emerge in endlessly, and relatively safe and efficient hydrogen production consumables have become a relative key. Product parameters Brand: TOPTITECH Material: Gr1 Shape: Rectangular Applicable object: electrolyzer Thickness: 0.8-2.0mm Specifications: can be customized Mesh: 1000 mesh/inch Filtration accuracy: 20 microns Type: Efficient Performance: acid resistance; alkali resistance; high temperature resistance Uses: water, gas, liquid Features 1. Precise air permeability, uniform air holes, certain mechanical strength, high adaptability for external processing; 2. High-purity raw materials, resistant to various acid and alkali environments, a corrosion-resistant material; 3. The porosity can reach 35%, which is a relatively high-strength product in a breathable material and can bear pressure; 4. It can withstand a certain temperature, for example, it can be used normally in a long-term heating environment within 300 degrees. Applications 1. Decarbonization filtration in the concentrated preparation link of the pharmaceutical industry and security filtration before terminal filtration in the thin preparation link. 2. Filtration, decarbonization filtration, and fine filtering of materials used in the manufacturing of raw materials. 3. Filtration following ozone sterilizing and ozone aeration, as well as security filtration for water treatment industries RO, EDI, and ultrafiltration systems. the 4. Clarify and filtering of alcohol, beer, soy sauce, vegetable oil, mineral water, and other drinks and food. 5. Material purification and sintered porous titanium plate at the feed inlet, decarbonization filtration and precision filtration of liquid products, liquid raw materials, and pharmaceutical intermediates in the chemical industry, filtration and recovery of ultra-fine fine bodies and catalysts, precision filtration and system heat conduction after resin adsorption Impurity removal and filtration of oil and materials, catalytic gas purification, etc. the 6. Before reverse osmosis in the seawater desalination field, oilfield return water filtering and security filtration. 7. White clay filtration and high-temperature decarbonization in the dye business. 8. Steam, compressed air, and catalytic gas purification and filtration are the primary aspects of gas purification. Process The pure titanium powder is pressed into a plate shape, and then sintered in a high-temperature vacuum sintering furnace. The particles are naturally bonded to form a plate shape, and then cooled to form a plate base material, which can then be cut into the desired shape.
Porous titanium plate is a type of material that is characterized by its interconnected network of pores. It is made from titanium, which is a lightweight, strong, and corrosion-resistant metal. The porosity of the titanium plate allows for increased surface area, which can be useful in applications such as filtration, catalysis, and biomedical implants. Product Parameters Brand: TOPTITECH Porosity: 30-40% Filtration rate: 1um-50um Temperature: â?¤300â?? Size: Customized Porous titanium plate has several features that make it a unique material. First, the pore size and distribution can be controlled during manufacturing, allowing for customization of the material for specific applications. The interconnected network of pores also allows for fluid or gas flow through the material, making it useful for filtration and catalysis. Porous titanium plate is also biocompatible, which makes it suitable for use in biomedical applications. Porous titanium plate has a wide range of applications in various industries. In biomedical applications, it is commonly used for bone implants, where the porous structure allows for better integration with surrounding bone tissue. It is also used in dental implants, where the porous structure allows for better anchoring of the implant. In the chemical industry, porous titanium plate is used for catalysis, where the high surface area and pore structure allow for efficient chemical reactions. It is also used in filtration applications, such as air and water filters. Porous titanium plates can be manufactured using several techniques, including powder metallurgy, sintering, and electrochemical deposition. In powder metallurgy, titanium powder is mixed with a binder material and then pressed into a desired shape. The material is then sintered to remove the binder and fuse the titanium particles together. In an electrochemical deposition, a layer of titanium is deposited onto a substrate using an electrochemical process. The resulting layer can be made porous by controlling the deposition parameters.
