refillable ink cartridge for Epson Stylus Photo R3000 with auto reset chip Product Description Cartridge Model : T1571/T1572/T1573/T1574/T1575/T1576/T1577/T1578/T1579 refill cartridge Suitable printers: Epson Stylus Photo R3000 refillable cartridge Chips&ink:with ARC chip,without ink!
sintered disc filters consist of highly uniform, interconnected networks of pores with tortuous paths that trap solid particles in gas or liquid. Excellent depth filters with superior mechanical strength. Stainless Steel Type 316L withstands temperatures up to 750F (399C) in oxidizing and 900F (482C) in reducing environments. These filters can be cleaned by other methods, such as ultrasonic baths or reverse flow flushing. If your application requires even greater resistance to corrosion, temperature, wear, and vibration, other nickel-based alloys are available.
3mm /4mm/5mm & Other sizes available. can supply single core and double core
NUOVAFIL manufactures a high quality Nose Wires to be used in the face masks for securing the gaps around the nose. It is made from 100% Food Grade Polyester. The Nose Wire is available either in cut pieces or in rolls as per requirement. The thickness, width and color are all customizable as per the customer requirement.
Avalable as per size and specification as required now avalable from 11 mm to 25 mm in width and having thickness from 0.5 mm to 1.25 mm as required. As required.
Five layer cast pallet stretch film Pallet stretch film is used primarily for load retention of products stacked on pallet for ease of transportation and protection Application: Hand Wrapping Machine Wrapping Bundle Tape
RFC series Radial Flow filter cartridge is made of melt blown inner & outer layer with adsorption media in between, it removes sediments as well as organic pollution from water. Specification RFC series Radial Flow filter cartridge is made of melt blown inner & outer layer with adsorption media (usually GAC) in between, it removes sediments as well as organic pollution from water. Compare to traditional UDF filter, RFC filter provides higher flow rate and better sediment reduction. Features NSF Certified activated carbon High flow rate Low pressure drop Rapid dechlorination Technical data Maximum temperature
OD 6 152.4mm L 40 1016mm 60 1524mm Flow 110m3h 60 Rate 1,3,5,10,30,50,70 Micron. Material PP Glass fiber Replacement PALL Pentair, Aquatec, Eaton, Graver, Mahle, Aqua
PP , Melt blown filter cartridge, 5 micron. ID:1.1(28mm) OD:2.5(63mm) L:10 (254mm)
BOPP BAG A4 size 0.03 x 225mm x 310mm + 40mm with Anti-static tape. The bag has good seal strength and easy peel tape. The price may change depend on the customer detail request (printing, thickness, etc). Also, the material price and currency rate exchange will affect the price.
Product Introduction The SUS316L powder sintered filter cartridge is a type of filter cartridge used for filtration in various industries such as pharmaceuticals, food and beverage, electronics, and water treatment. The L stands for low carbon content, which further enhances its resistance to corrosion and makes it suitable for use in environments that are prone to corrosion. The SUS316L powder sintered filter cartridge is made by compressing and sintering stainless steel powder to form a porous structure with uniform pore size and distribution. This structure allows forhigh flow ratesand efficient filtration of particles and contaminants from fluids. Features 1. High filtration efficiency: The multiple layers of stainless steel mesh provide a high filtration surface area, which results in a high filtration efficiency. 2. High-temperature resistance: SUS316L stainless steel can withstand high temperatures, which makes it ideal for applications where high-temperature resistance is required. 3. Long service life: The sintered metal powder structure of thefilter cartridgeresults in a high-strength, durable filter that has along service life. 4. Wide range of applications: SUS316Lpowder sintered filter cartridgesare suitable for a wide range of applications, including in the chemical, pharmaceutical, food, beverage, and water treatment industries. Applications SUS316L powder-sintered filter cartridges are commonly used in applications where high-performance filtration is required, and where the filter cartridge needs to withstand high temperatures, pressures, and corrosive environments. Pharmaceuticals: SUS316L powder sintered filter cartridges are commonly used in pharmaceutical manufacturing processes to filter out contaminants and impurities from liquids, including water, solvents, and drug formulations. Food and beverage: In the food and beverage industry, SUS316L powder sintered filter cartridges are used to filter out impurities from liquids such as juices, beer, and wine, and to remove particulate matter from cooking oils. Electronics: SUS316L powder sintered filter cartridges are used in the electronics industry to filter out particulate matter from chemicals and solvents used in the manufacturing of electronic components. Water treatment: In water treatment plants, SUS316L powder sintered filter cartridges are used to filter out impurities and particles from water, including sediment, bacteria, and other microorganisms.
Tapes Elastic Bandage Cotton Adhesive Fitness Tape Sport Injury Muscle tape knee Protector bandage Product Description Color:15 color can be choosed Total length:500 cm(197 inch) Size: Width length weight(g) 2.5 cm 500 cm 38 g 3.8 cm 500 cm 56 g 5.0 cm 500 cm 85 g 7.5 cm 500 cm 110 g 10 cm 500 cm 146 g Material: Cotton and Medcial Glue
PET aluminum laminated film has excellent physical and mechanical properties as ordinary polyester film, and also has excellent chemical properties. Good transparency, low haze, high glossiness. Mainly used for top grade vacuum aluminizing products, after aluminizing the film act as a mirror, has excellent packaging decorative effect; it also can be used as laser anti-counterfeit base film and so on.
Specification HTM Series is a flexible, high-performance, silica aerogel-based insulation material of limited combustibility used for exterior and interior applications. Description: HTM Series is a flexible, high-performance, silica aerogel-based insulation material of limited combustibility used for exterior and interior applications. Supplied in a variety of finishes, the substantial layers of HTM Series meet the requirements for A2 classification (insulation, MgO and plasterboard, and anything you wanted). The product is used to optimize the thermal performance and fire properties of systems in a number of ways. These include enhancing the thermal performance of the ventilated and addressing thermal bridging in the . HTM Series is also useful in minimizing thermal bridges around windows in areas such as window reveals and roller shutter cases.
We have cast line machines in india, situated At vadodara district. Technical measurement Facilities on line on production process. Stretch film, cling film available in 12 microns And above. Also mfrs specilaise film as per customers requirement. As per customers requirement. Stretch film, shrink film, cling film wind on 1" and 3" paper tubes
Empty Cartridges, Toners, OPC/Drums, Refurbish Printers and part materials
Black PC roll Features: The product has excellent appearance characteristics, not only durable, but also extremely easy to print. It does not need surface pretreatment and special ink, and it can show good ink adhesion. Uses: Widely used in membrane switches, instrument switches, brackets, commercial and communication equipment, POP display panels, medical diagnostic equipment, automotive instruments, etc. Existing specification coil: 930mm wide Appearance: black one side glossy and one side matte
This type of EVA is mainly use for interior decorative glass.For example: high-grade wired glass,sandwich mirror glass,mainly used for entertainment venues.hotels,home decoration etc. It has high dimensional stability,bonding strength,strong corrosion resistance and other advantages. It can extend the usage life of glass.
High Temperature Fiberglass Woven Tape PTFE coated fiberglass fabric takes high quality imported glass fiber as weaving material. The basic material is weaved specially into senior glass fiber cloth substrate. After unique technology such as full immersion, impregnation, coating the cloth with PTFE, different thickness and width of Teflon cloth is finally produced. PTFE Fabric Description Common thickness: 0.08mm 0.12mm 0.13mm 0.15mm 0.18mm 0.25mm 0.3mm We couls supply at most 1.5mm fabric. Common width: 1 meter or 1.25 meter For other width, customization is available as well. Features of PTFE Fabric: 1. High-temperature resistance(-100 to 550). 2. Non-sticky and easy to clean. 3. Food grade and nontoxic. 4. Heat resistance and fireproof. 5. Resistant to chemical corrosion, strong acid and alkali. 6. Good dimensional stability, high strength, and has good mechanical properties. 7. Low friction coefficient (0.05-0.1), the best choice for oil-free self-lubrication. 8. Light transmittance up to 6% 13 %. 9. High insulation property (the value of dielectric constant is only 2.6, and the value of tangent is less than 0.0025). 10. Anti-static and Ultraviolet-proof. Application of PTFE Fabric: 1. Packaging machines. 2. Bag making machines. 3. Heat print machines. 4. Somewhere else where the heat resistance and non-stick are needed.
For heat & UV resistance TPE for all plastics. 25 kg per bag.
