Chemical Name: Tetramethyl thiuram disulfide Molecular Formula: C6H12N2S4 Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in alcohol, diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be sensitive to skin and peogaster Application: Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of polychloroprene rubber with ETU and also be used as bactericide and pesticide Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Chemical Name: N-Tertiarybutyl-2-benzothiazole sulfenamide Molecular Formula:C11H14N2S2 Molecular Weight:238.37 Quality standrad:HG/T2744-96 CAS NO:95-31-8 Properties: Gray white powder (granule). The density is 1.26-1.32. soluble in benzene, CS2, methyl alcohol, acetone. chloroform, alcohol, insoluble in gasoline, water, acid and alkali with lower concentration Application: Provides fast cure rate and high modulus development in NR, SBR, BR and blends. Normally used alone or with small quantities of ultra accelerators in tire compounds or industrial rubber products low poison and high efficiency. It is good back up for NOBS. Be regarded as standard accelerator Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
Chemical Name:N-Cyclohexyl-2-benzothiazole sulfenamide Molecular Formula:C13H16N2S2 Molecular Weight:264.4 CAS NO:95-33-0 Properties: Gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. Soluble in benzene,boluene, chloroform, CS2, CH2Cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water,gasoline, acid / alkali with lower concentration. Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone when activated by DPG, TMTD and TS. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
Chemical Name:2-Mercaptobenzothiazole Molecular Formula: C7H5NS2 Modular Weight: 167.25 CAS NO: 149-30-4 Properties: Slightly foul odor and bitter taste, nonpoisonous. Specific gravity: 1.46-1.52.Soluble in ethyl acetone, acetone, dilute solution of sodium hydroxide and sodium carbonate, ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline. Application: Used for NR, IR, SBR, NBR, HR and EPDM.One of the mainly used acidic accelerators currontly and a medium fast primary accelerator. Imparts excellent aging properties, when used both alone and in combination with DM,TMTD and many others, mainly basic accelerators for higher activity. But care should be taken because it has a slight tendency to scorch. Unsuitable for use in the manufacture of food contact materials. Mainly used in the manufacture of tires, tubes, footwear, rubber belts and hoses etc. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging:25kg bag.
Chemical Name: Dibenzothiazole disulfide Molecular Formula:C14H8N2S4 Properties: A little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than MBT. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging: 25kg bag.
Description OF-7 is a polymeric alkyl phenol disulfide, contains unique sulfur donors in the molecular structure, can vulcanize rubber in heated state, � typically used as nitrosamine-free environment-friendly sulfur donating body in the rubber compound formulations, can give excellent mechanical properties, heat aging resistance, excellent dynamic fatigue properties and good operational safety performance. Application OF-7� contains unique sulfur donors, can� vulcanize rubber in heated state, giving non-blooming, high tensile strength, excellent heat resistance and dynamic fatigue properties, used� as� sulfur donor type vulcanizing agent� for NR/SR. For the co-vulcanization� of different polar rubber, such as NR, CIIR, IIR and EPDM, it provides excellent performance. Can be used in tires, gaskets, belts, automotive hose, damping products.� Because containing� alkylphenol� groups,� it has� also excellent tackifying and antioxidant effects. Not producing� nitrosamines toxic gas� during vulcanization, it is an environmentally friendly additive. Reference dosage 0.5-5 phr. Package and Storage In paper/plastic combined sack with inner film bag, 25 kg net each. Store indoor, drying and ventilating, shelf-life 18 months.
Styrene butadiene rubber SBR1502
chloroprene rubber CR244 chloroprene rubber CR244
Chemical Name: 2-Mercaptobenzothiazole Specification: Item Powder Oiled powder Granule Appearance Light yellow powder(granule) Initial M.P. C 171.0 171.0 171.0 Loss on drying % 0.30 0.50 0.30 Ash % 0.30 0.30 0.30 Residues on 150 m sieve, % 0.10 0.10 Additive, % 1.0-2.0 Granule Diameter, mm 1.0-3.0 Properties: It is light yellow powder (granule) with a little osmyl and taste bitter . Specific gravity:1.42-1.52. Soluble in ethyl acetate , ethanol , solution of NaOH and Na2CO3 , insoluble in benzene , water ang gasoline . Application: Used as an acid accelerator currently and a medium fast primary accelerator. Imparts excellent aging properties when used both alone and in combination with MBTS, TMTD and many others basic accelerators for higher activity. Its accelerative temperature is low and easily be dispersed with lower pollution . Mainly used in the manufacture of tires, tubes, footwear, rubber belts and hoses etc. Packaging: 25kg plastic woven bag , paper with plastic film bag , kraft paper bag or jumbo bag . Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Product Introduction MBTS is an accelerator of NR and SR. It has level and middle cure rate and higher Vulcanization temperature. It operates safely disperses easily and does not contaminate. It is aging resistant. White or light yellow powder or granule with slightly bit-ter taste, nonpoisonous. Application Mainly used in manufacture of tires, rubber tubes, rubber shoes, rubber cloth and other technical rubber goods. Accelerator MBTS works as plasticizer and delayed action activator in poly-chloroprene. Packing: In knitted bag lined with plastic bag or Kraft paper bag. 25kgs/bag or at buyer's request.
Introduction of rtv 2 molding silicone rubber: 1. Two-part of rtv 2 molding silicone rubber: flowable liquid silicon and catalyst. 2. Rtv 2 molding silicone rubber cures at room temperature within 4-6 hours. Features of rtv 2 molding silicone rubber: 1. Rtv 2 molding siliconerubber has an exceptional fluidity and good operability. 2. Rtv 2 molding silicone rubber hasgood temperature and deformation resistance as well as low shrinkage. 3. Rtv 2 molding siliconerubber has high duplication times. Operation step for rtv 2 molding silicone rubber: 1. Step one to use rtv 2molding silicone rubber: take 100g of part a and add 2g of part b and mix thesilicon rubber and the curing agent evenly. 2. Step two to use rtv 2molding silicone rubber: vacuum pumping 3. Without exception, thistakes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available. 4. Step three to use rtv 2molding silicone rubber: brushing cast & perfusion molding operation. 25kgs/drum vacuum package or 200kgs/drum
Introduction: JERINA Plasticizer A is mixture of selected high molecular weight saturated fatty acid zinc salt. Technical Specification: Appearance: Yellow granule Melting point deg.: 100.0-104.0 Ash content (850degX2h),%: 12.0-14.0 Zinc content %: 12.0-14.0 Iodine value, g/100g: 40.0-50.0 Performance: 1. JERINA Plasticizer A can reduce the viscosity of natural and synthetic rubber to making it easy to process. 2. JERINA Plasticizer A can improve the dispersion of filler and rubber chemicals in the rubber compound, and improve scorch safety. It also can promote vulcanization and release of vulcanized products to keep the mold clean. 3. JERINA Plasticizer A canshorten the mixing time, change flowability of unvulcanized rubber, and there is no adverse effect on the bonding of rubber and metal material. It can improve storage stability of rubber compound, especially beneficial for vulcanization process. 4. JERINA Plasticizer A also can improve compression set performance when applied in sealing strip of EPDM. Application: 1. Add plasticizer A together with rubber compound. 2. Plasticizer A is applicable to NR, SBR, NBR, EPDM etc. 3. Suggested ratio: 1-5phr Packing and Storage: 1. It is packed in Kraft paper bags lined with plastic film, net weight is 25kg/bag. 2. It should be stored in a cool, dry warehouse. 3. The shelf life is 24 months.
Chemical Name: N-Cyclohexyl-2-benzothiazole sulfenamide Properties: Gray-white powder(granule).A slight odor. Specific gravity: 1.31--1.34. Soluble in benzene, chloroform, carbon disulfide; Insoluble in water. Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone, when activated by Accelerator DPG, Accelerator TMTD and Accelerator TMTM. Packaging: 25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 1 years when stored under normal conditions.
Usage/Application Industrial Material Silicone Type Round Size As per customer requirement Color Red, Milky White & translucent I Deal In New Only
Form Tube Color Multicolor Size Customized Type Rubber Material Silicon
Material:Food grade silicone Color:Black,gray Style:Six-hole round ball, 6 squares, 24 holes with lid Size:18.5*13*5cm/16.5*11*5cm/18.5*13*3cm Weight:190G/119G/144G
We specializes in NBR, EPDM, SBR, NR rubber masterbatch and compound supplying to the automotive, electronics and construction industry. Our rubber masterbatch is customized according to customer's specification and requirement. Products that are using our material comprises of seals, gaskets, O-rings, bushes, weatherstrips, railway track pads, rubber fender, vibratory pads and the list goes on. With a team of dedicated experience staffs and fully equipped lab, we are able to meet the most stringent expectation of all your need.
Feature 1.Anti-high and low temperature 2.Non-slip and soft surface. Excellent Anti-slip performance 3.UV-Resistance,Ozone Resistant. 4.super clear &High transparent color. 5.Coating adhesive liner is welcome
