Quick details Condition: New Place of origin: Zhejiang, china (mainland) Brand name: Noelift Model number: Tha10 Type: Powered pallet truck Power souce: Ac motor Rated loading capacity: 1000kg Max. Lifting height: 4500mm Min. Lifting height: 3000mm Fork length: 930mm Fork width: 100mm Overall dimensions: 2536*1080*2247mm Certification: Ce, gost, iso9001 After-sales service provided: Overseas third-party support available Wheel type: Polyurethane Motor type: Ac free maintenance motor Operator type: Standing Color: For your choice Self weight: 2340kg Full load speed: 4km/h Packaging & delivery Packaging details:international packing way, packed with thick plastic film. Product description Electric order picker features 1. Loaded capacity: 1000kg. Optional lift height: 3000-4500mm. 2. Environment-friendly: Low noise and non-pollution electricity enegy adopted ensure noelift electric order picker environment-friendly. 3. Reliability: 3.1:american imported curtis controller, quick reaction, strong ability of accerleration and deceleration control, ensure equipment longer service life. 3.2: eps technology adopted(electric steering system), more convenient and easy to operate. 3.3: bruthless ac driving motor, ensure 30% energy saving, lower maintenance cost. 3.4: mast buffer function can lower noise from impact of buffer mast’s junction points during lifting operation.Chain of anti-fracture. 3.5: equipped personnel safety protection rope to ensure operator's safety. 4. Strict quality inspection system: Iso9001-2008, ce approved.
We are in strong position to supply : Barium petroleum sulphonate Grades: 45% and 55% of purity. Loading from china by sea. For more details, please contact us. Best regards.
We supply fuel additive : Vanadium inhibitor, Two grades, For gas turbine Packing: 250 kg net in steel drum Quantity: 3000mt per month Please contact us for details if you need. Best regards.
Quick details Condition: New Place of origin: Zhejiang, china (mainland) Brand name: Noelift Model number: Ta10-20 Type: Powered pallet truck Power souce: Dc motor Rated loading capacity: 1000kgs-2000kgs Max. Lifting height: 3000mm Min. Lifting height: 1600mm Fork length: 1000mm Fork width: 160mm Overall dimensions: 1585mm*760mm*2060mm Certification: Ce, iso9000, gost After-sales service provided: Overseas third-party support available Semi electric stacker color: Red or yellow Semi electric stacker type: Standing operate Semi electric stacker brake: Electric brake system Packaging & delivery Packaging details:International packing way, packed with thick plastic film. Delivery detail:15days after advance payment Product description 1-2ton semi-electric stacker economic cheaper 10days delivery after advance payment With eps steering system, easier operater Semi-electric stacker, ta series steering wheel pallet stacker, rated load capacity: 1000kg, 1500kg, 2000kg, lift height: 3500mm, used for single face pallet; 1. With eps steering system, easier to operation; 2. Electronic trpe braking; 3. To use intelligent charger, auto analysis the residual energy and optimizing the charging process, without manual operation and extend the battery working life effectivly; 4. Speed limited for high position, to aviod the possibility of products' overturning when high speed in high position; 5. High strength overhead guard to protect the operator
Full ac 4 wheel electric forklift features 1.Loaded capacity: 2ton, 2.5ton, 5ton. Optional lift height: 3000-6000mm. 2. Environment-friendly: Low noise and non-pollution electricity enegy adopted ensure noelift 3-wheel electric forklift environment-friendly. 3. Reliability: 3.1: two of the kinematic each a precursor is independent motor drive, can be separated into gear and motor two parts, each motor driver is a single and complete transmission device, it is superior performance, self-control and safe operation of the strong double driver. 3.2: better stability:low layout for battery , low center of gravity; 3.3: full hydraulic power-assisted steering system, easy to steering and save the energy; 3.4: curves safe control: the speed will automatic reduced when turning, to aviod the possibility of rollover; 3.5: regenerative braking function to increase the working hours for forklift; 3.6: better durability: unitary frame with better strength and rigidity, 3.7: full ac technology with high efficiency and reliability; 4. Used place: Apply to massive stacking level carrying cargo/discharge goods single/double tray, is similar to the flat cement and asphalt pavement. 5. Strict quality inspection system: Iso9001-2008, ce approved.
We are in strong position to supply : Tbn booster, Tbn 400, Calcium sulphonate Top quality, Loading from china by sea. For more details, please contact us. Best regards.
Gasoline and diesel engine oils, ATF, Greases, Hydraulic oils, Brake oils etc.
Scope Lubricant liquid rust meter according to national standard GB / T11143 prescribed design and manufacture of metal corrosion can be determined when the lubricating oil, hydraulic oil, turbine oil and other fats in water Features 1, the LCD screen English display interface, menu prompts input; 2, the use of computer programs temperature control, high precision, good accuracy; 3, user-friendly design, the instrument automatically timed, when the reminder alarm; 4, instrument software interface displays a variety of parameters such as clocks date and current tips; 5,4 group sample design, the user can choose to open any one set of experiments, without disturbing each other according to their own circumstances; Technical Parameters 1, temperature range: room temperature ~ 100 ? 2, temperature accuracy: ± 0.5 ? 3, when the control range: 0 to 99 hours arbitrarily set 4, stirring speed: 1000r / min 5, the maximum power consumption of 2500W 6, Sheng-like holes: 4, customers can turn to any one set of experiments, interfering 7, ambient temperature: room temperature ~ 35 ? 8, relative humidity: =85% 9, the power supply voltage: AC220V ± 10% 50Hz
Zista group was first established in 2005 as a trading group and during the last decade it has been expanding its network and business through china, hong kong, iran, singapore and several other countries worldwide. Please kindly check our website as below for checking our details and references: Www.Zista.Co We are supplier and provider of all petroleum oils including bitumen, base oil, slack wax, paraffin wax and rubber process oil (rpo). Zista group supply of base oil is direct from iranian refineries and we have been empowered to develop market for iranian base oil in east asia. We are in position to supply different grades of base oil as below: GradesAvailable packaging DrumFlexiBulk Base oil sn 150VV Base oil sn 500VVV Base oil sn 600VV Base oil is a commodity which has worldwide consumption and price reference, depending on international references such as argus & icis for the middle east supply. Zista group is proud to announce its capability to offer fixed & formula prices both for supply of base oil in order for buyers to be able to manage short term and long term contracts, while having an open hand in the available packaging and especially flexi bags, makes it possible to deliver the product anywhere in the world intact and with certified quality. We shall await to receive your genuine inquiry in order to advance to a long term mutual business, Please do not hesitate to contact us for any further discussions, Regards, Alireza rahmani
1, in the use of the paving machine, how to do a good job in the maintenance of hydraulic system? Answer: in the use of the paving machine, do a good job in the maintenance of hydraulic system, you can greatly reduce the fault. General should pay attention to the following points: (1) hydraulic oil in hydraulic tank joined the former, should use clean containers of oil, hydraulic oil must be after oil filter filter, then add the hydraulic oil tank; the replacement cycle of the hydraulic oil as the oil quality and (1000h changed once; replacement of hydraulic oil should be in the working temperature; in order to ensure good heat dissipation of the hydraulic system, should also regularly clean hydraulic oil radiator. (2) due to the asphalt paving machine construction environment is generally relatively poor, hydraulic oil filter replacement cycle should also be shortened (generally was750h is appropriate), replacing with a new filter element, when should be checked, prohibited the use of deformed, pollution or rusty filter. (3) in the daily start of the engine work, should be idle for some time after the operation, and then to control the implementation of components, so that the use of hydraulic pump. (4) due to the long-term use, the hydraulic system parameters will change, therefore, should be regularly check the hydraulic system parameter settings, to be adjusted in time.
Specification Value Test Method Penetration @25°C 85-100 ASTM D-5 Specific Gravity @ 25°C 1.01-1.06 ASTM D-70 Softening Point °C 45-52 ASTM D-36 Flash Point °C 225 min ASTM D-92 Ductility @25°C 100 min ASTM D-113 Loss on Heating %wt. 0.5 Max ASTM D-6 Drop in Pen. After Heating % 20 Max ASTM D-6 & D-5 Solubility in TCE %wt. 99.5 min ASTM D-4 Spot Test Negative A.A.S.H.T.O.T 102 Bitumen Penetration Grade 85/100 (also known as 80/100) is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses .
Specification Value Test Method Penetration @25°C 40-50 ASTM D-5 Specific Gravity @25°C 1.01-1.06 ASTM D-70 Softening Point °C 52-60 ASTM D-36 Flash Point °C 250 min ASTM D-92 Ductility @25°C 100 min ASTM D-113 Loss on Heating %wt. 0.2 Max ASTM D-6 Drop in Pen. After Heating % 20 Max ASTM D-6 & D-5 Solubility in TCE %wt. 99.5 min ASTM D-4 Spot Test Negative A.A.S.H.T.O.T 102 Bitumen Penetration Grade 40/50 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.
Specification Value Test Method Penetration @25°C 60 IS 203 Absolute Viscosity @60°C, Poises 1600-2400 IS 1206 Kinematic Viscosity @60°C, Poises 300 IS 1206 Softening Point °C 45 IS 1205 Flash Point °C 220 IS 1448 Solubility in CS2 %wt. 99.0 IS 1216 Test on residue from rolling thin film oven test Viscosity Ratio @60°C 4 IS 1206 Ductility @25°C 50 IS 1208 VG-20 is usually used for paving in cold climate & high altitude regions
Specification Value Test Method Penetration @25°C 35 IS 203 Absolute Viscosity @60°C, Poises 3200-4800 IS 1206 Kinematic Viscosity @60°C, Poises 400 IS 1206 Softening Point °C 50 IS 1205 Flash Point °C 220 IS 1448 Solubility in CS2 %wt. 99.0 IS 1216 Test on residue from rolling thin film oven test Viscosity Ratio @60°C 4 IS 1206 Ductility @25°C 25 IS 1208 VG-40 is used in highly stressed areas such as intersections, near toll booths and truck parking lots in lieu of old 30/40 Penetration grade. Due to its higher viscosity, stiffer Bitumen mixes can be produced to improve resistance to shoving and other problems associated with higher temperature and heavy traffic loads.
Specification Value Test Method Penetration@25°C 60-70 ASTM D-5 Specific Gravity @25°C 1.01-1.06 ASTM D-70 Softening Point °C 49-56 ASTM D-36 Flash Point °C 250 min ASTM D-92 Ductility @25°C 100 min ASTM D-113 Loss on Heating %wt. 0.2 Max ASTM D-6 Drop in Pen. After Heating % 20 Max ASTM D-6 & D-5 Solubility in TCE %wt. 99.5 min ASTM D-4 Spot Test Negative A.A.S.H.T.O.T 102 Bitumen Penetration Grade 60/70 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.
Specification Value Test Method Penetration @25°C 90-130 ASTM D-5 Specific Gravity @ 25°C 1.01-1.06 ASTM D-70 Softening Point °C 40-45 ASTM D-36 Flash Point °C 200 min ASTM D-92 Ductility @25°C 100 min ASTM D-113 Loss on Heating %wt. 0.5 Max ASTM D-6 Drop in Pen. After Heating % 20 Max ASTM D-6 & D-5 Solubility in TCE %wt. 99.5 min ASTM D-4 Spot Test Negative A.A.S.H.T.O.T 102 Road Bitumen 90/130 issued for construction and repair of road surfaces, designed for various types of road application such as hot asphalt and bituminous mixtures, recommended for regions with temperate climates
Specification Value Test Method Penetration @25°C 80 IS 203 Absolute Viscosity @60°C, Poises 800-1200 IS 1206 Kinematic Viscosity @60°C, Poises 250 IS 1206 Softening Point °C 40 IS 1205 Flash Point °C 220 IS 1448 Solubility in CS2 %wt. 99.0 IS 1216 Test on residue from rolling thin film oven test Viscosity Ratio @60°C 4 IS 1206 Ductility @25°C 75 IS 1208 VG-10 is widely used in spraying applications such as surface-dressing and paving in very cold climate in lieu of old 85/100 Penetration grade. It is also used to manufacture Bitumen Emulsion and Modified Bitumen products
Specification Value Test Method Penetration @25°C 45 IS 203 Absolute Viscosity @60°C, Poises 2400-3600 IS 1206 Kinematic Viscosity @60°C, Poises 350 IS 1206 Softening Point °C 47 IS 1205 Flash Point °C 220 IS 1448 Solubility in CS2 %wt. 99.0 IS 1216 Test on residue from rolling thin film oven test Viscosity Ratio @60°C 4 IS 1206 Ductility @25°C 40 IS 1208 VG-30 is primarily used to construct extra heavy duty Bitumen pavements that need to endure substantial traffic loads. It can be used in lieu of old 60/70 Penetration grade
Specification Value Test Method Penetration @25°C 10-20 ASTM D-5 Specific Gravity @25°C 1.01-1.06 ASTM D-70 Softening Point °C 85-95 ASTM D-36 Flash Point °C 225 min ASTM D-92 Ductility @25°C 5 min ASTM D-113 Loss on Heating %wt. 0.2 Max ASTM D-6 Drop in Pen. After Heating % 20 Max ASTM D-6 & D-5 Solubility in TCE %wt. 99.5 min ASTM D-4 Spot Test Negative A.A.S.H.T.O.T 102 This grade has a wide variety of industrial applications roof felts. Waterproofing for roof & floors, anti-rust pipe coating, anti-slip layer compound for poling, sound dampening felts, under carriage sealant and coats in the auto motives, electrical cable joint protection and etc.
Specification Value Test Method Penetration @25°C 160-220 ASTM D-5 Specific Gravity @ 25°C 1.01-1.06 ASTM D-70 Softening Point °C 35-43 ASTM D-36 Flash Point °C 250 min ASTM D-92 Ductility @25°C 100 min ASTM D-113 Loss on Heating %wt. 0.2 Max ASTM D-6 Drop in Pen. After Heating % 20 Max ASTM D-6 & D-5 Solubility in TCE %wt. 99.5 min ASTM D-4 Spot Test Negative A.A.S.H.T.O.T 102 Road bitumen 160/220 is a product produced in the process of oxidization of a vacuum residue obtained from the distillation of crude oil. Bitumen 160/220 is used for production of the bitumen emulsions, as a raw material for insulating materials industry, for repairing technologies of damaged road surfaces
