Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
A top coat. Clay base cement mixed solid powder product. Hand trowel. Both rough and smooth surfaces can be obtained.
A top coat. Cement Base silica mixed solid powder product. Spray or hand trowel. Rough surface.
Luxes Titanium Floor Finish is a cement-based product that can be applied on the floors. This product is specially designed to replace the use of high-cost floor tiles. The latest innovation of the decade to save time and money with the option of different architectural designs and finishes.
Luxes Wall Finish for interior and exterior use is a high quality rapid setting product consists of cement, gypsum & pigments blended with specially graded fillers & ingredients for the finishing & smoothing of walls or any other imperfect surfaces. Latest innovation of the decade to save time and money with the option of different architectural designs and finishes.
Luxes Exterior Rough Finish is a high-quality rapid-setting compound consisting of silicates, alumina & gypsum blended with specially graded fillers & ingredients for the finishing & smoothing of walls or any other imperfect surfaces. The latest innovation of the decade to save time and money with the option of different architectural designs and finishes.
20Kg Bag Luxes Skim Coat White Interior is a high-quality rapid setting compound consisting of silicates, alumina & gypsum blended with specially graded fillers & ingredients for finishing & smoothing of walls or any other imperfect surfaces.
A top coat .Cement base solid product which is available in required color. Hand trowel. Smooth surface.
An under coat. Cement Base silica mixed solid powder product. Hand trowel or spray. Rough surface.
A top coat. Cement base solid product which is available in required color. Hand trowel.Smooth surface.
A top coat .Acrylic water base semi solid paste with silica mix. Can be found in required color. Spray by hopper gun. Rough surface.
An under coat. Cement base plaster available in white and gray color. Hand trowel.
An top coat.Cement Base silica mixed solid powder product which is available in required colour.Hand trowel.Rough or semi rough surface.
Use of Product : Coating, Paints, Offset Printing Ink, Plastics, Textile Printing Emulsions. TESTING MACHINES : 1. Muller Machine 2. Vibro Shaker 3. Melting Point Apparatus 4. Electronic Balance / Single Pan Balance 5. Laboratory oven Heating Mentle 6. Hegmann Gauge. We carry our application Test for : a) Textiles. b) Oil Paints. c) Water based Distemper. d) Inks : Ink testing done in NC Media, Polymide Media, Vinylamide Media. This Plant is dedicated for manufacturing the product â??Pigment Violet â?? 23â??. Location of Plant is at Lote Parshuram, Tal. Khed. The plot of the Company is in the area of MIDC and it is a Chemical Zone. There is a Central Effluent Treatment Plant, which does a secondary treatment of the Effluent before the water is released to near by Sea.
Tungsten carbide cobalt sintered and crushed powder is high hardness coating powder.The sintered and crushed morphology generally produces a higher coating density compared to agglomerated and sintered powders.It offers dense, excellent bonding and provides resistant to abrasion erosion and sliding wear . The coating also has high wear resistance but with low coefficient of friction.
Polyester RAL7035 Powder Coatings with Smooth Glossy or Wrinkle are available
Quick Details Place of Origin: Sichuan, China Brand Name: WOCO Model Number: CDW-5 Alloy Specification: WC12Co Particle: -45+15um process: agglomerated&sintered Color: dark gray Ct: 5.4-5.8 Co: 11.5-12.5 Fe: â?¤0.5 others: â?¤0.1 W: Balance Apparent Density: 4.8-5.3g/cm3 Hall Flowability: 18s/50g
Liquid Thermal Insulation Coatings Which is heat resistant up to 150 deg C.
Optical components, anti-reflection film, PMMA or PC coating, beam splitter, IR-cut, UV-cut, Reflection coating(metal), neutral density filter, band-pass filter, color filter(red, blue, green..etc.), cold mirror, hot mirror, ND filter, Anti-finger glass, screen protection glass, High Reflection, AR coating, IR-pass filter, cover glass. Description: Quality Optical Coatings and Optical Filters
Water Borne Peelable Resin PU-3018A Product Introduction PU-3018A is a protective resin made of water borne polyurethane dispersions, using high performance additives and advanced processing technology. The waterborne peelable coating made of this resin has bright color, and fine particle size, coated on the surface of automobiles, furniture, electrical appliances and other objects as a protective coating, with good protection, can form a continuous, uniform, strong protective coating on the surface of complex shapes, can isolate the erosion medium, protect the surface of the substrate not easy to be worn, abrased, scratched, meanwhile, moisture-proof, rust-proof, corrosion â??proof, improve the commodity value of coated products. Upon completion of the protection period, the film can be conveniently removed to restore the original appearance of the object. Physical Property ModelPU-3018ACompositionPolyurethane organosilicon copolymerAppearanceMilky liquid with blue shadeSolid content35�±2%PH7.1-8.0IonicityAnionViscosity (Brookfield 25â??)50-160mpa.s Performance Features High peeling strength, not easy to break High strength, good water resistance Excellent low temperature resistance, weather resistance, air permeability and moisture resistance, and universality of different substrates Applications All kinds of metal surface, for example, temporary protection of products such as automobiles and stainless steel appliances Temporary protection of all kinds of glass products Temporary protection of all kinds of plastic products Can be used as temporary protection for coating, ink coating Can be used as temporary protection for other products Application Guide Can be directly painted on the surface of the construction surface, or add the right amount of water after dilution Can be added talc, silica and other inorganic split materials Can also add resin-free pigment paste to do color temporary protection coating The peelable film dry completely, when it needs to be removed, please tear out a long mouth along the edge of the film, and then slowly peel the film from the coated surface with a force of about 4-5kg Packaging and Storage Condition 50KG, 120KG, 200KG plastic drum; Stored in a 100% light â??proof sealed container; Stored in a cool and dry place indoor at 5-30â??; Under high temperature or exposure, the shelf life will be significantly shortened; Shelf life is 12 months from the date of production under condition that the drum is not opened. Special Tips This material is complied according to our existing technology and experience, the technical advice provided is sincere, but it is not guaranteed to be used in all samples and formulations, all the data are for users reference only.
