IOL HANDLING CASE 1 SG handling case is made from injection moulded . Food grade polymers. Top case material - Polystyrene Bottom case material: Polypropylene
STERILIZATION BOX TYPE 2 SG Sterilization Box is made from injection moulded special polymers (Imported) Different Features: Fingertip mats, Special Plug-in inserts to suit the instrument, Accommodate different variety of instruments, Support for autoclave, steam, dry heat and chemical sterilization Size :160mm x 85 mm x 25 mm
CARTRIDGE SG 320 It ensures patient's safety and IOL's integrity during injection. Surgeon is allowed to control his IOL injection technique in the eye, through a micro incision from 2.80 mm to 3.20 mm depending upon the insertion technique used. Shape:Round Reference:Cartridge SG 320 Theoretical Diameter: Inner : 2.00 mm, Outer : 2.40 mm
CARTRIDGE SG 220 It ensures patient's safety and IOL's integrity during injection. Surgeon is allowed to control his IOL injection technique in the eye, through a micro incision from 1.40 mm to 2.20 mm depending upon the insertion technique used. Shape:Round Reference:Cartridge SG 220 Theoretical Diameter: Inner : 1.40 mm, Outer : 1.80 mm
STERILIZATION BOX TYPE 1 SG Sterilization Box is made from injection moulded special polymers (Imported) Different Features: Fingertip mats, Special Plug-in inserts to suit the instrument, Accommodate different variety of instruments, Support for autoclave, steam, dry heat and chemical sterilization Size :160mm x 85 mm x 25 mm
SG Pushers ( Bunks
30atm/40atm , 20ml /30ml are available. Ergonomic design for handle of the body Several different models available for choice. Super stable quality.
30atm/40atm , 20ml /30ml are available. Ergonomic design for handle of the body Several different models available for choice. Super stable quality.
We are a manufacturer located in Shenzhen China. We sell PTFE guide wires, hydrophilic guide wires, stainless steel guide wire, nitinol guide wire. Size 0.018-0.038" length can be customized.
We are a manufacturer located in Shenzhen China, we sell radial and femoral introducer sheath, 4F, 5F, 6F, 7F, 8F, 9F, The price is very competitive and quality is very good.
We are a manufacturer for cardiology disposables based in Shenzhen China, we sell 2-port, 3-port, on/off handle manifold, the price is very competitive and quality is very good.
MOQ: 1000 PCS APPROVED CE
The YH-830 Bi-level device is indicated for treatment of sleep apnea hyponea syndrome in patients weighing more than 66Ib (30kg). It is intended both for home use and hospital use. The water tank is intended for single patient use in the home environment and re-use in a hospital/institutional environment. Maximum inhale pressure 30cmH2O, with separate humidifier (better humidification) ST and target tidal volume mode settings Fast rise time Normal inhalation intensity, respiration rate is 54 times / min, with each exhalation triggering the ventilator perfectly. Good synchronization with big flow Mode: CPAP, S, T, ST, VGPS Trigger adjustment Cycle adjustment Slope adjustment Noise less than 32 dB(A) With YF-01 mask, humidifier and SD card Water tank and power adapter Parameters Package Size 3 CTNS 48.5 32.521.5cm 37 24 17cm(Cart Parts) 90 52.8 21cm(trolly) N.W.(kg) 22 G.W.(kg) 28 Pressure: 4-30 cm H2O
The Y-30T respiratory ventilator comes with a humidifier and provides non-invasive ventilation for patients with respiratory insufficiency. BiPAP demonstrates excellent therapeutic effect for diseases like obstructive sleep apnea-hypopnea syndrome, SOAGG, chronic obstructive pulmonary disease, COPD, interstitial lung disease, ISL, spinal muscular atrophy, CMA, Pickwick syndrome, cystic fibrosis and amyotrophic lateral sclerosis, or ALS. BiPAP synchronizes quickly with the individual characteristics of the patient's body, with increased sensitivity of sensors and automatic adaptability of settings. BiPAP is easy to set up, and allows fast switches from different treatments, regardless of the number of patients and the complexity of the disease. Simple, reliable, sensitive, quickly synchronized with the patient Suitable for home use Non-invasive CPAP, S, S / T, T operating modes IPAP 4-30, EPAP 4-30 8-step inhalation-exhalation triggers Adjustable inhalation-exhalation pressure Inhalation time (0.5-3 seconds) and respiration rate 3.5 "color LCD display; high-quality body and humidifier material Monitoring Vt, Res Rate, Min Vent, Leak. Alarms in all respects 5-step adjustment of the humidifier Display of the key parameters of therapy in the online mode Build quality conforms to German standards ** Specifications Pressure Range: 4-30cm H20 Model number: Y30 Auto on/off: No Noise Level: 3 dB Weight: 1.3kg
Key Specifications/Special Features: Aerospace quality, professional technology, a popular model Easy to take, dampproof, quakeproof and salt fog resistance Invasive, non invasive and manual ventilation in one machine Volume regulation, pressure limit, time switch, demonstrating the strategy of lung protection Inspiration halt, convenient for sucking phlegm and avoiding cross infection Driven mode: pneumatically driven and electrically controlled Three kinds of power supply: A/C, D/C and on vehicle power supply Application: adult & child Ventilation modes Volume control: A/C SIMV A/C + SIGH Manual Ventilation SPONT NIPPV Controlling part Tidal volume (VT): 50ml~1500ml Minute Volume: 0~20L/min I/E Ratio: 1:0.3, 1:0.5, 1:0.7, 1:1, 1:1.5, 1:2, 1:2.5, 1:3, 1:3.5, 1:4 Respiratory rate (f): 4~80bpm Limited pressure: 1kPa ~ 5kPa Trigger sensitivity: 2kPa ~ 2kPa Continuous current: 3 ~ 5LPM Manual inspiration halt: 20s Inhaled oxygen concentration: 48% ~ 100% consecutive adjustment Safety valve pressure limit: 5.1kPa ~ 6kPa Monitoring part LCD display Airway pressure waveform Inhaled tidal volume Minute Volume Total respiratory rate Peak airway pressure Trigger pressure AC/DC indication Could monitor all parameters and waveforms in manual mode Audible and visual alarm part Upper and lower airway pressure limit Power supply failure Low charge of battery Others Power supply: AC220V± 10%, 50Hz± 1Hz, 12V on vehicle power supply Built in battery: provide a more than 2 hour power supply when power off Gas pressure: 0.25~0.6Mpa. Cylinder gas supply can work continuously for 30min. Ventilator compliance: 40 x 10 2 ml/Pa Weight: 22kg Export Carton Dimensions: 60x 40 x54 cm
The Shangrila 510S is a universally used model. Not only for emergency ventilation, but also it is suitable for ideal transport ventilation. The circumstances include on-site emergency treatment, pre-hospital transport, interhospital transport, and even intra-hospital transport. Specification Ventilation Mode: Assist/Control (A/C) Manual Parameter MV: 3~20 L/min (used in 60%), 3~14L/min (used in 100%) Respiratory rate: 10~60bpm I:E ratio: 1:2 FiO2: 60%,100% Trigger sensitivity: Pressure, -3cmH2O Monitoring Pressure values: Paw Alarm: Paw high, O2 supply down Technical Data Gas supply: O2, 0.28~0.6MPa Maximum security pressure: 8kPa Compliance: 4mL/100Pa Noise: 65dB(A) Dimensions (H WD):276 110142mm Weight: 2.4kg Environment Requirement Temperature:-18C~50C (Operation)-20C~55C (Storage) Relative humidity: 5%~95%, non-condensing (Operation) 93% (Storage) Atmospheric pressure: 70~110kPa (Operation), 50~110kPa (Storage)
P30 Portable Non-invasive ventilation P30 is mainly applicable to patients with mild or moderate respiratory failure, no evidence of emergency intubation, relatively stable vital signs, and no contraindication to non-invasive ventilation. It is used for early intervention and assisted withdrawal of respiratory failure. Advantages Small SIze and easy to carry Color LCD display, easy to operate Display and monitor patient clinical usage data in real time Features Low-flow oxygen can be connected for air-oxygen mixing Has VAF target tidal volume function Can be equipped with blood oxygen module Can be equipped with an independent humidifier Configurable trolley Maximum JPAP to 30cmH20 Ventilation mode: CPAP, APAP, S, ST, T, APCV, AutoB 4 work modes: CPAP, S, T, S/T, APCV APCV mode:Assist pressure control ventilation Dynamically monitor the treatment effect Real-time alarm in case of failure Light weight:2.0kg (without trolley) Scope of application Assistant therape of respiratory disease, HD(Pulmonary heart disease), COPD(chronic obstructive pulmonary disease), Motor neurons. Specifications Difference: B-30P Screen: 3.5 Inch color TFT Work mode: CPAP, S/T, S, T, APCV Inspiration Pressure: 4-30cmH20 Inspiration Sensitivity: Auto, 1-6 level Expiration Pressure: 4-25cmH20 VAF function: Yes, Tidal Volume 50-2000ml
The Gamma-Scout hand-held radiation detector or geiger counter is a general purpose survey meter for measuring and detecting ionizing radiation. It can detect alpha, beta, gamma and x-ray radiation. The Gamma-Scout radiation detector can be used to: - Determine the source of radiation leakages - Monitor ambient radiation anomalies - Monitor personal cumulative dose exposure - Detect radioactive elements in metal scrap - Check rocks from the earth for radioactivity - Teach or learn about radioactivity
Fighting the novel coronavirus is a battle the entire world is fighting, and our main warriors are our healthcare workers and providers. There is an overwhelming number of patients that are being sent to the hospitals as suspects, showing us again how viral and infectious this disease is. Doctors, nurses and laboratory personnel have human contact with these patients and are at the highest risk of exposure or chances of transmission. This transmission occurs through droplets or contact both of which the doctors deal with while treating or testing a patient. There are increased chances of nosocomial transmission during aerosol generation, manual ventilation, intubation and extubation. To contain aerosolization during airway procedures, certain precautions have to be maintained. For this, Insights Techhub brings to you highly coveted Aerosol Boxes. Made with transparent acrylic, aerosol boxes are used to cover the patients head and hands during tests and airway procedures. This prevents any contamination that may be caused due to the patient coughing. Even with the protection provided by face shields and masks, the aerosol generating process puts nurses and doctors in a situation of high risk. Aerosol boxes separate the patient from the surrounding air effectively blocking chances of exposure due to coughing or aerosol generation. While most aerosol boxes cover only the patient head, our rectangular shape is designed so that the head as well as hands are boxed-in. Ergonomically designed to leave openings for hands, our boxes have been rigorously tried and tested to ensure safety is maintained, there is room for maneuvering during procedures, the patient doesn't feel claustrophobic and that contamination is limited. The movements of the hands may feel restricted in the beginning, but it will become natural over time. ISO 9001 certified, the boxes are 2-3mm thick on all sides. Acrylic being the main material, aerosol boxes are easy to make and transport. As the cases are increasing, so is the testing and other procedures, increasing the exposure to positive patients. Insights Techhub aims to reach across the country where reliable and reasonable products are needed now more than over. Please contact us for more details. This is transparent box act as an insulator between a doctor and a patient infected with the deadly virus like Covid-19.An aerosol is a suspension of fine solid particles or liquid droplets in air or another gas. Aerosols can be natural or anthropogenic Worldwide, the soaring number of COVID-19 patients means more patients are needing to undergo intubation and other aerosol generating procedures. Aerosol boxes aim to reduce exposure to medical personnel by blocking aerosols.The exterior handles of the box reduces the risk of cross-contamination while transporting the box.
Johnson & Johnson - Endosurgery equipment and accessories