Vertical milling machine
RDSO approved plant
The system is capable of producing bright and long oxygen-free copper rod, copper tube, flat copper bar and other special shaped copper material from cathode copper, and the copper rod diameters are from 8mm to 30mm. Total annual capacity is from 2000 MT to 10000MT. Technical parameter of final product: Density: 8.9 g/cm3 Tensile strength: 170N/mm2 Elongation at break: >35% Conductivity of soft wire: í¦100% IACS Oxygen content: í_10ppm
Universal high performance press are widely used in the field of aeronautics, automobiles, agricultural machines, electric machines, apparatuses and meters, medical equipments, electrical home appliances and hardware. Welded frame with quality steel which means good rigidity Square figure long guide with six friction faces makes abrasion on resistant and punching precision. Combined pneumatic clutch and brake is made of friction material, which means long service life. Closed bevel gear, dipped in lube, which drives stably with low noise. Slide with counter balancer, which will eliminate the clearance and improve the stability and precision. Jh series automatically lubricate at a fixed time and location with fixed amount. Plc electric control system is safe and reliable. Air cushion, photo guard, auto feeder, speed die changing are optional. Fb*lr*height:1940*1370*3290 Weight:10000kg
Three-dimensional structure land-saving the screen-passing rate can reach to 99% the transmission is steady and reliable; the transmission device of mainframe adopts airtight gear case and zonal wheel. Centralized control for the electric system, convenient to operate. Model 3R2115 Max Feeding Size (mm) 15 The final products size (mesh) 80-325(finest 500) Capacity (T/H) 0.2-1.5 Rotational Speed of the Central Axis 160Rev The inner Diameter of Roller (mm) º¦630 The Diameter of Roller (mm) º¦210 Height of Roller and Ring (mm) 150 Motor of Mainframe Y200L-8-15KW Motor of Air Blower Y132M-4-11KW Motor of Separator Y112M-6-2.2KW Dimension (Lí-Wí-H) 4.6í-3.4í-5.9 Raymond Roller Mill 3R2715 Number of roller: 3 Diameter of roller: 270mm Height of roller: 140mm Inside Diameter of ring: 830mm Height of ring: 140mm Max. Feeding size: 15-20mm Fineness of product: 0.044-0.165mm Capacity: 0.9-3.8 t Raymond Roller Mill 4R3216 Number of roller: 4 Diameter of roller: 320mm Height of roller: 160mm Inside Diameter of ring: 970mm Height of ring: 160mm Max. Feeding size: 20-25mm Fineness of product: 0.044-0.165mm Capacity: 1.8-4.5 t Raymond Grinding Mill 5R4121 Number of roller: 5 Diameter of roller: 410mm Height of roller: 210mm Inside Diameter of ring: 1270mm Height of ring: 210mm Max. Feeding size: 20-25mm Fineness of product: 0.044-0.125mm Capacity: 5-8 t For information, please see our website: http://www.grinderpro.com/Raymond.html
DM - 20 Of 15 - 20 TPH DM - 45 Of 30 - 45 TPH DM - 60 Of 45 - 60 TPH DM - 90 Of 60 - 90 TPH DM - 120 Of 90 - 120 TPH DM - 150 Of 120 - 150 TPH
Fully computerised plants upto 150 tph capacity Mobile and stationary Wet type and bag house filter systems Hot mix storage silos Global presence with prompt product support Top quality components Safety covers provided with moving and electrical parts Ease of lubrication and dismantling has been built into the design for efficient maintenance and repair Fabricated parts are thoroughly cleaned and treated before painting State of the art technology and internationally recognised techniques used in the manufacturing process
CGLHJ series of Electrical conveyor belt vulcanizer are specialized equipments for curing joints of belts of conveyer machines. The machine is made of light aluminum alloy materials, and with small bulk, light weight , ordinary three-phase current power supply, temperature uniformity of heating plate, uniform pressure (1.0 ~ 2.0 Mpa) of water supply system. It is equipped with light Automatic Electronic Control Box, which is connected with mainframe by integrative plug-in and multi-core cable .Ití»s reliable and convenient to operate. At the same time, it has the merit of fast warming, uniform temperature, high thermal efficiency, etc. It is a kind of ideal adhesive joint equipment mechanical rubber conveyor belt. The quality of the belt connection will influence the working efficiency and service life of belts directly, especially for the long distance and high-strength conveyer belts. Therefore, CGLHJ vulcanizer is the necessary assistant equipment of belt conveyer. Purposesú¦ The device is widely used in vulcanizing and adhesive joint of canvas, nylon, steel cord, conveyer belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry around where are without sufficient explosive gases and the harmful gases which can corrupt metal. It can also be applied to the vulcanizing joints of belts of special features, such as anti-corrosion, thermal-protection, etc. Technical parametersú¦ 1. Vulcanization pressure: 1.0-2.0mpa; 2. vulcanization temperature: 145 íµ; 3. Difference in surface temperature of vulcanized plate: í+ 5 íµ; 4. Calefactive time (at normal temperature to 145 íµ) :¿Q30 min; 5. Power supply voltage: 380 v. 50Hz; 6. Output power of Electronic Control Box: 36 Kw; 7. Temperature adjustment range: 0 to 200 íµ; 8. Timing adjustment range: 0 to 99 min; 9. After the pressurization of 0.8 MPa, the gap between upper and lower heating plate is not more than 0.4 mm
CGLHJ Series of Electrical water cooling belt Curing Machine own small bulk, light weight , ordinary three-phase current power supply, temperature uniformity of heating plate, uniform pressure (1.0 ~ 2.0 Mpa) of water supply system. It is equipped with light Automatic Electronic Control Box, which is connected with mainframe by integrative plug-in and multi-core cable .Its reliable and convenient to operate. Presently the devices are widely used in vulcanizing and adhesive joint of canvas, nylon, steel cord, conveyer belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry around where are without sufficient explosive gases and the harmful gases which can corrupt metal. It can also be applied to the vulcanizing joints of belts of special features, such as anti-corrosion, thermal-protection, etc. The device can cool heating plates quickly through water as long as there is ordinary water supply at the scene after vulcanization. It Can greatly improve efficiency and enhance the quality of belt joints, generally cooling from the curing temperature to 60 íµ, 10 minutes, cooling water pressure í¦ 0.2 mpa. Water cooling belt Curing Machine, of lightweight, can be moved by manpower easily. Please consider the facility of electricity and water before installation. Please put through the water sources with upper and lower heating plate, cooling water pipe by specialized water pipe, but not to discharge water for the time being. Then begin to maintain constant temperature until finish vulcanization, then open water supply at this time instill water into hot plates. When the temperature drops to preset technical value, discharging water and disassembling equipments are allowed, and the vulcanization is finished. Purposesú¦ The device is widely used in the fields of metallurgy, chemical industry, metal mine, power plant, harbor and wharf where use the device to contact the belt joints. If users carry out vulcanization technics according to referred parameters, the pull intensity of the belt can be 90% comparing with the original one, not only the belt joints are smooth, but ití»s almost the same with the original belt, and meanwhile it will weaken the abrasion to rollers, furthermore it can prolong the service life of conveyor and conveyor belt.
No.1 Introduction: Aiming at solving the defects of the traditional steeliness rollers, such as when encountered acid, alkali and salt, they are easy to get corrosive, sticky, abrade, and due to getting stuck of the axletree, the belt is easy to lacerate as well as their short service life, etc. Our company has succeeded in developing wear-resistant ceramic rollers. After the terminal operating results in iron and steel, chemical, fertilizer, mining, power plant, salt works and shipside industries show that the products are not only of wear and acid and alkali salt resistance , anti-oxidation, operation stability, security features, but also can effectively prevent the belt deviation, reduce partial loss of belt, prolong its service life, reduce the manpower, material resources and time caused by replacing rollers frequently, lower operating costs and improve the efficiency of belt conveyor. As operating under harsh environment in the open air, their service life is 3-5 times longer than the traditional one. No.2 product advantages: 1. Corrosion resistance. 2. Strong hardness and abrasion resistance. 3. Entire hermetic sealing. 4. On the Ceramic surface forms a layer of oxide film, it doesní»t have any binding or response to any substance. 5. 2-5 times longer service life than steeliness roller, furthermore it can reduce belt abrasion and prolong service life of belts. 6. Cost-effective, it can reduce the integrated costs of the belt conveyor and repairing. No.3 Data Sheet of Chemical Composition: Component Sio2 Al2o3 Mgo Fe2o3 Cao Na2o Other Content 51-54% 45-48% 0.4% 0.25% 0.15% 0.1% Tiny No.4 Technical Parameters: Compressive strength: 145 Mpa Flexural strength: 80 ~ 120 Mpa Hardness (Mohsí»s) :> 7 Adaptable Temperature: -80 to 180 íp C Water absorption:
Working area:740*1120mm Travel of engraving:600*900mm Power of main spindle:2.2kw Maximum speed:10m/min Maximum carve speed:7m/min Maximum feed-in height:200mm Work mode:stepper Voltage:ac220v/50hz Command:g code*.U00*mmg
Working area:1410*1420mm Travel of engraving:1200*1200mm Power of main spindle:2.2kw Maximum speed:10m/min Maximum carve speed:7m/min Maximum feed-in height:200mm Work mode:stepper Voltage:AC220V/50Hz Command:G code*.u00*mmg
Cnc Acumen solutions provide one stop solutions for most of your industrial needs, we provide most possible best solution for our customer's requirement in a short duration, with world class quality and in competitive price with value added services. Acumen solutions is based in singapore and providing services to various industries located in india, malaysia, australia..Etc., having a wide range of network in various countries including china, taiwan, malaysia, germany, singapore, australia..Etc., We are working closely with various electronics, medical, automotive and semi conductor industries by providing the most latest and reliable technology. Our main products are 1) new and used machines solutions 2) industrial automation solutions. 3) standard and customized products solutions. 4) engineering design and analysis solutions. 5) precision machining solutions. 6) import and export solutions.
Hydraulic and mechanical rake angle shearing machines from 2 mtr to 6 mtr length from 2 mm to 20 mm thickness As per customer requirement and for export - packed in export worthy wooden case
Used catterpillar
Gross weight 485kg Electric motor power4.0kw Work voltage380v 50hz Output rotate speed of reducer41 r.P.M Wooden case Weight 500tons Dimension1000 w485 w1000mm
Shibang Ball Mill is used to grind many kinds of mine and other materials, or to select the mine. It is widely used in building material, chemical industry, etc.These mill has two ways of grinding: the dry process and the wet process.
Shibang Sand Washing Machine is a kind of water washing style mining equipment to be matched with the sand making machine such as jaw crusher, impact crusher etc, and can reduce the dust and stone powder which mixes with the final sand, so sand washing machine can improve the quality of the sand. XSD series Sand washing machine is used in building plant, quarry, concrete plant, dam building, casting-70 sand, glass factoryí»s quartz sand and refilling pressure sand. You could used it with the Sand Making Flow.
Shibang conveyors consist of standard parts, which are advanced and simple in structure, easy to maintain. Our vibrating equipment is adaptable for stationary and mobile crushing plants. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump materials, or packaged materials. According to different transferring equipment, the transfer system can be one independently or multi-conveyors or combined with other transfer equipments. The belt conveyor can be installed horizontally or aslope to meet the needs of different transfer lines.
SHIBANG Raymond Millgrinder produced by our company is mainly used to grind non-inflammable and non-explosive materials with Mohí»s hardness below 7 and moisture content below 6% such as barite, calcite, potash feldspar, talcum, marble, limestone, ceramic, glass, etc Raymond grinder can be used in mining, chemical industry, construction materials, metallurgy and so on. The final products can be adjusted freely from 100 mesh to 425 mesh. Firstly, raw material is crushed by jaw crusher to the size required, then elevated into a hopper from which the material is transported through the electro-magnetic vibrating feeder evenly and continuously into the grinding chamber for powder-processing. The rollers oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between the ring and rollers to accomplish the grinding.After grinding, the rough materials will be recycled by the air from the fan back into the grinding chamber for re-grinding and the fine powders are blew into the cyclone and poured out through the output-powder pipe as the final materials.
