Features: 1, This product is a new type strong stone adhesive, applied to all kinds of low water absorption stone materials like large-scale artificial stones, culture stones, and natural stones 2, No need to wet the brick wall, effectively improve the efficiency 3, Strong bond ability, material-reducing, much safer and firmer than the traditional cement adhesive, also can reduce the construct trash and the quantity of the wall 4, Good anti-acid and anti-alkali and anti-infiltration and anti-aging function 5, Small shrinking rate, no cracking, can be used in cold and humid environment. Application: 1, The adhesive for cement plaster, brick, smooth cement wall paste stone 2, The adhesive for low water absorption surface and light steel frame system board, like gypsum board and Eight board. Surface Treatment: The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials. Operation Process: 1, The ratio: MB tough stone adhesive: water: 3.3: 1 (25kg powder, about 7.5kg water) mixed and stirred into paste, using an electric mixer to make particle paste, put it aside for a few minutes and then a little stirring to gain the better effect 2, Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m2, then push the stone above it 3, For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material. Normal Amount: Coverage areas differ according to the circumstance: 1, using 3*3mm tooth scraper about 1.8kg/m2 2, using 6*6mm tooth scraper about 3kg/m2 3, using 10*10mm tooth scraper about 4.8kg/m2 Note: the amount is related to the smooth, vertical rate, and thickness of the stone material Cautions: 1, make sure the smooth and vertical rate of the surface before operation 2, never mix the dry slurry with water and use again 3, for the painting surface, make sure the initial bond strength and no flake 4, Finishing after 24h can be walked in or fill the crack. Store Method: Store in cool and dry place, unopened product can be saved for one year. 25kg/bag
Features: 1. This product is a new type strong adhesive, applied to indoor and outdoor wall paste of large-scale ceramic tile, grassing stone, and natural stone material 2. The indoor ceramic tile adhesive of light steel frame system board, like gypsum board and Eight board 3. Can be used on the low water absorption surface, like paste new ceramic tile above the old ones, and can be used on the firm painting surface 4. Excellent flexibility, can bear the bonding layer stretch that caused by temperature 5. Good anti-infiltration function 6. No need to wet the brick wall, effectively improve the efficiency. Surface Treatment: 1. The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials. 2. For the new wall, when finding the leveling layer of cement mortar, plaster, should improve the leveling layer of mortar label the cohesive force of the wall, or mix MB-03 slurry additive. Specific reference, please look at the MB-03 introduction. Operation Process: 1. Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m2 2. Push the ceramic tile or heavy type ceramic tile above it 3. For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material. Cautions: 1. Never mix the dry slurry with water and use again 2. For the light wall board install large-scale decorative panels, like gypsum board and Eight board, confirm the wall firmness before operation 3.For the painting surface, make sure the initial bond strength and no flake 4.Operating under 5¡æ~40¡æ situation 5.Clean the surface by little wet sponge or cloth before it dry 6.Leave 1.5mm joint space between two tiles, suggesting MB-MC color anti-moldy gap filler. Technical Reference: Coverage area(amount). using 3*3mm tooth scraper about 1.7kg/m2. using 6*6mm tooth scraper about 3.0kg/m2. using 10*10mm tooth scraper about 4.5kg/m2. Technical reference: 1, Adjust time: about 15min (adjust time: the effective time for the dislocation to adjust) 2, Cool time: about 10min (cool time: the longest cool time that the adhesive can last ) 3, Dry time: 24h (according to the weather) 4, Water resistance: excellent; non-toxic, prevent firethe smoother the surface, the less amount 5, When dry, anti-weak acid, anti-strong alkali and oil resistance 6, Cut degree: £¾1.2MPa (14days later). Store Method:Store in cool and dry place, unopened product can be saved for one year. 25kg/bag.
Solvent adhesive.
Water based adhesive.
STYLAM Industries, India manufacturing and exporting is SR 999 contact Adhesive. adhesive widely accepted for speed in furniture making and use in surface where it is difficult to apply pressure. Used specially for bonding vertical laminates. Also use for bonding decorative laminates to wood and plywood.
Physical Appearance White viscous liquid Film Slight hazy pH value 4 - 6 Viscosity 300 ± 50 PS ( Brookfield Viscometer) Solid Contents 43 ± 1 % (w/w) Bond Strength Minimum 250 kg. In Plastics containers of 250gms, 500gms, 1Kg, 2Kg, 5Kg, 10Kg, 27kg and 54kg.
Super bond high performance epoxy adhesives for fixing marble, grenite, machinery & multi purpose usages. Fastest cureing & super strength is a additional benifit. 1kgs, 1.8kgd, 5kgs, 20kgs.
It is often used for making matches, as glue/adhesive in works of printing, wooden furniture, publication, the abrasive paper of the gauze , feed and so on. It sometimes also used as glue additive. The viscosity is very important for use.
Features: 1) Industry bone gelatin: a) Often used for making photographic paper, fixture and Galvan plastics liquid, match and wooden furniture. The product is under the QB/T1995-94 national trade standard. b) Packing making with the container bag of cow hide, gift box c) Sometimes also used as glue additive. 2) Bone glue in pearl: a) Made of animal bones. b) Bone was grounded into powder, dissolved in water, evaporated and dried into a hard jelly c) Also can be used in mortise-and-tenon work as match industry d) To be used with book, stationery as glue additive. 3) The bloom and viscosity are very important for use. 4) Specified specifications will make our reply more accurate.
Type :stick Color : blond black Welcome to test our quality
High standards 25 kg paper bags, as per the requirements of customers
Uses:it is fit to be used for the adhesion of materials like electric appliances, heat-shrinkable material, packing material, fabrics, leather, lumber, plastic, metal, ceramics, etc. Performance:it is transparent, light yellow viscous solid, non-toxic, no stimulation, soluble in most organic solvents, non-soluble in water. It has good mechanical strength, good fluidity, excellent tenacity and high adhesion strength. Packing:pe film lined pp woven bag, net wt 25kg.
Uses: it can be used in pipe surface as anti-corrosion coating, apply for epoxy primer, and the coated mortar. It is also widely used in epoxy glue, antirust paint and antisepsis coatings and so on. Performance: it has good curing properties, good adhesion, easy to peel off, with good bending properties and excellent resistance to impact resistance. It has wider range than epoxy resin and easy to operate. Plastic drum or plastic coated metal pail, net wt 180kg
Our cyanoacrylate adhesive super glue is a high viscosity adhesive featuring the characteristic function as long shelf life and strong toughness and low bloom. It is suitable for the repairing and the adhesive of exquisite goods, such as jade, leather, porcelain, wood, leather, toys and artwork.It absolutely conform to environment-protection standard.We have passed rohs, reach, eu, ce, and iso 14001:2004 international certificate.They have following character: Nontoxic, environment-protection. Fast dry High viscosity Low-bloom No strong smell Long lasting 3gram/tube, 1, 2, 3, 12 pcs/card
Animal glue Industrial gelatine We are manufacturering industrial type gelatine the other name animal glue, please do contact us if you would like to have. Packing of 50 kgs per bag
Appearance: Black Liquid Viscosity: 200-300 CPS Initial Adhesion: Quick bonding as long as be contacted. Curing time: 5-30s, 24 hours later, achieve the highest strength Solidification intensity: Single eyelash's pull strength (3mm be spliced) reached 3.5N Operation temperature: Room temperature. 1.Sealed store without direct sunlight and ensure the temperature below 25oC. Keep ventilation. 2.Shelf life-12 menthes. If exceeded, you can use it while you think it will be OK by test, but our company won't be responsible for anything. 3.Keep away from any fire source.
The product is tailored for bonding all kinds of artificial nails. It is popular with ladies, especially who love beauty very much, as its quick bonding rate, good bonding intensity, without any solvent and easy to use. There are colorless and pink transparent liquidness glues. 5 grams in white bottle or 10 grams in colorless bottle.
The product is tailored for bonding artificial or natural hair to the natural one. It is popular with ladies, especially who love beauty very much, as its quick bonding rate, good bonding intensity, without any solvent and easy to use. There are colorless transparent and black liquidness glues. 10 grams or 20 grams in transparent PE bottles.
Our main items are solvent based adhesive, polyurethane adhesive, grafted CR adhesive, polychloroprene adhesive, spray adhesive, natural rubber glue, primer and so on. Bonding various substances, have widely used in shoes & bags & sofas making, hard PVC link & tubes, wooden furniture, carpet, leather chemical material etc. Package: 3 or 15kgs per drum
Glass tube, Styrene free The capsule size is from 8mm to 30 mm with threaded anchor rod. A capsule contains acrylate resin (vinyl ester), peroxide(hardening agent), quartz particle.When the components are combined, they form an adhesive mortar which mechanically bonds the anchor rod to solid base material. This type of system must be used with a chisel pointed anchor rod which spin into it with a rotary hammer drill. 1) Chemical material: acrylic resin,styrene free, quartz particle 2) Glass tube: easy to pack 3) Rapid condensation 4) steady to humidity 5) Easy to apply 6) Temperature range: - 5 ~ +40ípC 7) Shelf life: 12 months 8) Resistant to acid and alkali,and aging; fire and heat-resistant