AR5750B Refrigerant/SF6 Gas Leak Detector Description This rechargeable refrigerant gas detector respond to all halogenated refrigerant, but also apply to: A. This was response to all halogenated refrigerant (including chlorine and fluoride). Including but not only limited to below: CFCs e.g. R12, R11, R500, R503 etc... HCFCs e.g. R22, R123, R124, R502 etc... HFCs e.g. R134a, R404a, R125 etc... Also can detect compound gas for example AZ-50, HP62, Mp39, etc... B. Detect gas leaks in hospital equipments. C. SF6 gas was detected in high voltage circuit shot cut.. D. Detect halogen gas when gas mixing with, chlorine, fluorine, bromine. E. Detect carbon tetrachloride from the dry cleaning machine. F. Detect the halon gas from the fire extinguisher. AR5750B Refrigerant/SF6 Gas Leak Detector Specifications * Detect item: All halogen gas * Sensitivity: Halogen refrigerant gas 3gr / yr * Response time: Instantaneous * Warm up time: < 6 second * Continuous operation time: 5 hours(slightly vary with operation) * Operation temperature: 0 to 52C( 0 to 110F) * Power supply: 2000mAh, 3.7V lithium rechargeable battery
Product Description: Auto Parking System Sensor for BMW F20 F21 F22 F30 F33 F34, MPN: 66209261595 is available in stock . OE: 66209261595 Warranty 12 months Item Name parking sensor/Radar Handling Time 2-3 days . In Stock Yes Package: OUYICC ; Neutral; Customized
innoCon 6800C controller is specially designed for water treatment and industrial process control. Used with innoSens 310/330 sensor, it can measure the conductivity,resistivity,TDS and temperature of the sample water. It features automatic temperature compensation and has various mounting methods. 4-20mA/RS485 and multiple control function outputs are a standard feature.
Waterproof Meat Probe Thermistor Temperature Sensor 3.3K For Stove Oven Grill Baker I Description Of Thermistor Temperature Sensor A meat thermometer is a unit which will measure core temperature of meats while cooking.It will have a metal probe with a sharp point which is pushed into the meat. It should be connected by a flexible heat-resistant silicone cable to oven control board & display. Some brand models have programmed for auto cooking with the meat probe.
5.8GHz C-band microwave. Input voltage: 12 - 24V DC . Input current: 30mA. *0~10V / PWM output signal. Super compact size(o50 only), easy and small enough to be used built-in. Specially designed for UFO highbay fixtures, shoeboxes, wallpacks, simple plug and play. If the lighting fixture manufacturers / contactors do not want the sensor function, they just need to easily remove the sensor head and put the cover cap on, the fixture becomes standard non-sensor control fixture. Intelligent photocell to measure and differentiate natural light from LED light even when used built-in. Memory function with one button commissioning, easy operation and user friendly. IR remote commissioning, easy setting and user friendly. Detection range up to max. 16~18m in diameter. Mounting height: max.12m. Operation temperature: -20 c ~ + 70 c. RoHS compliant. IP rating: IP65.
Flow Sensor DN 10 RRH-010 DN 25 RRH-025
Quick Details Place of Origin: Sichuan, China (Mainland) Brand Name: SAND Model Number: PT3xx6 Series Pressure Range: 0~150MPa (20000psi) Accuracy: ±1.0% FS Power: 10V DC (6~12V DC) Signal Output: 3.33mV/V (Full 33.3mV) or 3.0mV/V (Full 30mV) Probe Temperature: 535 PT3XX6 Series:PT3116 Series, PT3216 Series, PT3226 Series. Mercury Free Ultra-Temperature Melt Pressure Transducer (Sensor) Product Introduction: PT3xx6 Series Melt Pressure Transducer(Melt Pressure Sensor). This series are used a special material and pressure transmission which can bear as high as 535 °C measuring medium to replace the traditional 400 °C. this technology is created by our company only in home. Performance Parameters: Pressure Range: 0 ~ 5 MPA~ 150 MPA ( 0 ~ 750psi ~ 20000psi ); Accuracy: ±0.5% FS; Power: 10VDC ( 6 ~ 12 V DC ); Output Signal: 3.33mV/V (Default), 3.0mV/V(Optional) etc. Probe Heat Resistance: PT4516 Series: 300°C; PT4616 and PT4626 Series: 400°C; Temperature Drift: =500M/500VDC; Mechanical Connections: 1/2"-20UNF, M10x1.5, M12x1.5, M14x1.5, M18x1.5, M22x1.5 etc. (Optional) Electrical Connections: 6PIN (SD02106P/SD02106S); Thermometric Config: Thermocouple: E, J, K, S type etc.; (PT4626 Series Optional); Thermal Resistance: Pt100 etc. (PT4626 Series Optional); Features: * Anticorrosive wear-resisting coating: apply to high concentrations of rough media pressure measurement, can improve the service life of 3 to 5 times (optional); * Special requirement can make to order, delivery date 7 ~ 15 working days; * Optional supporting intelligent digital pressure meter: PS1016-43x series, PS4810-43x series, PS4812-43x series and PS9016-43x series. Order Format: Example1: PT3816-350bar-M18-150/470-3.33mV/V Note: Product design Model "PT3816". Function code "Null" stands for melt pressure transducer. Coating code "Null" stands for without coating . Pressure range: 0 ~ 350bar.
Overview D203S is the hot selling item in the market. Mostly used for light control lamp switch, general detection angle. PIR (Passive Infrared Detector) are used to detect motion object like human movement. All the PIR sensor must work with Fresnel Lens, this version can detetc more than 8 meters. Features Low consumption Custom design is available Higher in cost-performance Item D203S Encapsulation Type TO-5 IR Receiving Electrode 21mm, 2 elements Window Size 3-4mm Spectral Response 5-14m Transmittance 75% Output Signal[Vp-p] 3500mV Sensitivity 3300V/W Detectivity (D*) 1.4 108 cmHz1/2/W Noise[Vp-p]
Product Name: Sensor IC Substrate Material: Shengyi SI10U Minimum width / spacing: 35 / 35um Surface: Immersion Gold PCB thickness: 0.25mm Layer: 4Layers Structure: 1L-4L,1L-2L,3L-4L Solder mask ink: TAIYO PSR4000 AUS308 Aperture: Laser hole 0.075mm, Mechanical hole 0.1mm Application: Sensor IC Substrate
HPD05 Infrared PM2.5 Sensor Module Product Details 1. Module List HPD05 Module 2. Product Overview HPD05 PM2.5 Sensor Module use principle of optical scattering to measure concentration of dust inthe air,the module built in a Infrared Transmitter and a high sensitive Photoelectric Receiving Sensor the Infrared Transmitter emits light and the light meets the dust to produce the scotch light, theintensity of the scotch light detected by Photoelectric Receiving Sensor reflects the concentration ofdust in the air, HPD05 have two ways to output current concentration data, one is PWM signal (thewidth of signal is the value, 1ms = 1ug/m3), the other is IIC signal(unit is ug/m3). HPD05 can be used for Air Cleaner, Air Conditioner with purifying function, Fresh Air System and air quality testing equipment. 3. Detecting Principle Detecting Principle Per the principle of optical scattering,the Transmitter emits light, and the light meets the dust to produce the scotch light, the high sensitive Photoelectric Receiving Sensor detects the intensity of the scotch light then output intensity signal, current which is proportional to the size and quality of intensity of the scotch light, the current is amplified by amplifier and calibrated by CPU, finally output digital PWM signal or IIC data of concentration of dust. 4. Performance Parameter 1 Characteristics Characteristics Connector CON2 Pin Description Connector CON2 Pin Description 2 Life Life of Light Source: above 5 years with continuous power on. 3 Photoelectricity Characteristics Photoelectricity Characteristics 4 Signal Output a1. PWM signal output(Corresponding Model HPD051Axxx): Signal Output The relation of Low Pulse Time and Dust Concentration: 1ms = 1ug/m3 The pulse width outputted by P1 pin is the average value of Dust Concentration(Lower responding speed, small fluctuation & good stability) The pulse width outputted by P2 pin is the insta
we focus on NTC thermistor and Temperature sensor, mainly applied to HVAC / R products, medical temperature probes and automotive temperature sensors.
Ultrasonic Sensor Module HC-SR04 HC-SR04 Sensor Features Operating voltage: +5V Theoretical Measuring Distance: 2cm to 450cm Practical Measuring Distance: 2cm to 80cm Accuracy: 3mm Measuring angle covered:
Product Description soil moisture and soil temperature sensor to facilitate soil moisture and soil temperature measurement. The product has high precision, fast response and stable output. It is less affected by soil salinity and is suitable for various soil types. It can be buried in the soil for a long time, resistant to long-term electrolysis, corrosion resistance, vacuum potting, waterproof and rust proof. Soil Moisture Sensor Technical Parameters Technical Parameter The signal output type Output voltage 0-2V output impedance
RS-FS- * wind speed sensor, compact and lightweight, easy to carry and assemble, design cups can be efficiently obtain information about the wind speed, high-quality aluminum alloy housing, external spray plating process, has good anti-corrosion, anti- erosion and other characteristics, to ensure the long-term use of non-rust transmitter cut phenomenon, in conjunction with smooth internal bearing system to ensure the accuracy of the information collection, and traditional analog signals (4-20mA, 0-10V, 0- 5V) for data output. Is widely used in greenhouse, environmental protection, weather stations, ships, docks, breeding and other environmental wind speed measurement.
Description of Industrial Thermocouple RTD PT100 Temperature Sensor with 1/4" Thread Product Name :Thermocouple Type :PT100 Temperature Range :0�°C-150�°C Probe Size : 0.5 x 10cm / 0.2" x 3.9" (D*L) Thread Diameter: 8mm/ 0.31" External Material Plastic, Metal, Rubber Total Length 1M / 39.4"(we can customize other length) Fork Terminal Spacing 0.5cm
Model Output UB300-18GM45-E6E7-V15: pnp+npn UB300-18GM45-IE7-V15: 4-20mA+npn UB300-18GM45-U10E7-V15: 0-10V+npn UB300-18GM45-S2/S4-V15: RS232/RS485 UB300-18GM45-IU10-V15: 4-20Ma+0-10V Sensing range/ 40-300mm Standard target plate/ 100â?³100mm flat plate Blind zone/ 0-40mm Resolution/ 0.15mm Reproducibility/ ±0.15% Operating Voltage UB/ 10-30V dc,±10%vpp,UBâ?¥12V No-load current/ â?¤30mA Switching hysteresis/ 2mm Response delay/ 20ms Material/ Stainless steel, plastic parts. Class of protection/ IP67 Operating temperature/ -20 â?½ +70 Storage temperature/ -30 â?½ +85 Weight/ 32g Type of connection/ 5-pin M12 initiator plug
Quick Details Place of Origin: Sichuan, China (Mainland) Brand Name: SAND Model Number: PT3xx6 Series Pressure Range: 0~150MPa (20000psi) Accuracy: ±1.0% FS Power: 10V DC (6~12V DC) Signal Output: 3.33mV/V (Full 33.3mV) or 3.0mV/V (Full 30mV) Probe Temperature: 535 Temperature Drift:
Dongguan Shengwei Plastic Products Co.,Ltd is a private high-tech enterprises, which is a set of plastic mould design and manufacture, injection molding, assembly, products R&D and sales as one. The company is located in Humen Town, Dongguan, China, where enjoys the convenient transportation conditions and advanced manufacturing bases. Shengwei was established in 2003. After more than ten years of development, it has grown into a complete supporting large-scale factory. the factory has adopted full-automatic dust-free workshop, advanced and complete manufacturing facilities, has strong technical force. Occupy area 12,000 square meters, more than 200 employees, 90% of them has experience over 10 years. Shengwei has advanced equipment for making mold, plastic injection molding, automatic dust-free spraying workshop, as well as advanced measuring testing equipment laboratory. Shengwei has various levels CNC processing centers, EDM machines, Sodick low speed wire cutting, deep hole drilling machine, milling machines, lathes, grinders, CMM etc. From 35 tons to 1000 tons, there are more than 30 high precision single-color, double-color and special injection moulding machines.
ECO-SURE (2E) Carbon Monoxide (CO) Gas Sensor Description ECO-SURE (2E) Carbon Monoxide Sensor, 2 Electrode, long life sensor designed for residential, fire detection and ventilation control applications. UL certified. ECO-SURE (2E) Carbon Monoxide (CO) Gas Sensor Features: * Long Life * Stable Performance * UL Certified - UL2075 ECO-SURE (2E) Carbon Monoxide (CO) Gas Sensor Applications: * Residential * Fire Detection * Ventilation Control ECO-SURE (2E) Carbon Monoxide (CO) Gas Sensor Technical Specifications * Operating Principle: 2-electrode electrochemical * Measurement Range: 0-500 ppm CO * Maximum Overload: 1000 ppm CO * Sensitivity: 45 ± 15 nA/ppm * Response Time (T90):
2-wire RH/T Transmitter RHT * Low cost * Temperature compensation system * Two 2-wire transmitters for RH and temperature * Optional built-in Pt temperature sensor * Optional stainless steel sintered filter * IP65 protection Using thin-film sensor with capacitance changing proportionally to medium relative humidity, RHT measures RH of air and non-aggressive gases and converts it into standard 4-20mA 2-wire signal. A built-in temperature drift compensation system guarantees good stability of measurement and an additional temperature sensor or second 2-wire transmitter may be built-in for measurement of both medium relative humidity and temperature. The RH transmitter is factory calibrated and does not need custom adjustment, while the temperature transmitter can be additionally calibrated on-site. The device is available in 3 variants with different mounting and temperature ranges. All this, in addition to the high protection class, the small size, and the low price, make RHT a convenient solution for many RH measurement applications.
