Operating voltage:
Features Specifications: Membrane Switches with Embedded LED's A membrane switch with embedded LED's is generally described as a thin, low profile, micro-motion front panel keypad, utilizing one or more layers of polyester. Screen printed conductors are printed on each layer, and pressure-sensitive adhesives are used to bond the polyester layers together. The assembly may also include passive electronic components, such as resistors or capacitors that are adhered to the membrane switch substrate using conductive adhesive technology. Other options that are often provided on the front panel include an adhesive mounting sheet to attach the keypad to a housing or sheet metal bracket, and a graphic overlay - which provides the cosmetic appeal that is most often associated with a touchpad assembly. The display panel would include either tactile or non-tactile switches as part of the front panel. Thus, a bonded assembly can also be described as a non-tactile, or tactile, membrane switch assembly.
Contact: amily[at]veecom dot com dot cn GVE-Tplus is an upgrade of GVE-T. It is based on the ASIC circuitry design technology. It is a multi-functional, multi-purpose E1/G.703 to V.35 and LAN three-in-one multiplexer, which is also knowns as the three-in-one interface converter. GVE-Tplus can not only be set up into GVE-T, but also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N*64Kbps(N=1--31). The work mode can be either internal clock and slave-clock, or N*64Kbps(N=1--31) external clock to achieve end-linking line. GVE-Tplus can be set up into long-range Ethernet bridge from V.35 to LAN interface. With low cost, it is suitable for use in bridge connection which is sensitive to cost or use in LAN as a stretcher or subsection. It can learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN. There are more than 10000 addresses in its LAN table. And they can be updated automatically. The highest speed of filtrating and transmission is 30000 frame/second(line speed). The buffer size is 64M. The throughput delay is 1 frame. When it is used as a stretcher or subsection, it can forbid filtration so that all traffic can be broadcasted in WAN. 10baseT interface can run in full duplex Ethernet with topology and improve data throughput by eliminating filled blanks in the 64 bytes frames. Without any negotiation in V.35 port, it is specially suitable for use in satellites and other wireless broadcast. 245mm*215mm*50mm
10/100 MBPS managed media converter Managed Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network management that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX fiber optic cable. It enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. With its SNMP manager, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps. Hardware Function Support 10Base-T, 100Base-TX, 100Base-FX Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x standards Up to 5km distance on multi mode optical port and 120km distance on single mode optical port High-performance auto-negotiation chips make sure the data transfer with higher Security, stability and without block. Up to 1916 bytes package forwarded Support half/full duplex mode Auto-negotiate Low power consumption, low heat generation and excellent compatibility 10Watt professional communication power supply module inside the standalone. Chassis supports double redundant power supply modules and each power supply module Supports up to 100 Watt power output for the security and stability Support hot-swap for all the modules, but not including management module Single-strand/dual-strand optical module selectable, FC/SC/ST optical port slectable and standalone/16-slot chassis selectable. Device Size Standalone: 132mm (width)*36mm (depth)*122mm (height) 19-inch Chassis: 440mm (width)*125mm(depth)*250mm(height)
10/100m management switch Complies with ieee802. 3 10base-t, ieee802.3u 100base-tx. Store and forward 111function. . Full / half duplex mode, supports auto-negotiation technology . Plug and play installation with automatic port configuration . 1610/100m self-negotiable rj-45 ports, auto-shift 10base-t and 100base-tx. .Basic board width: 4.8 gbps, supply separate board width for each port to 111realize real bon-blocking transmission . Store-and-forward .Built-in 4m bit data buffer, supply full forwarding rate . Supports port trunking . Supports vlan function, max. 16 vlan groups & 802.1q 32 vlan groups max. . Supports 3 kinds of pri setting: port, tos, ieee802.1p .19" standard rack-mounted size -
10/100m+gigabit port switch Auto mdi/mdi-x on each port to simplify integration into a network complies with the ieee802.3, ieee802.3u, and ieee802.3ab features store-and-forward mode with wire-speed filtering and forwarding rates ieee802.3x compliant fullduplex flow control led indicators for simple troubleshooting . -
Membrane switch Advantage: 1. Pleasing in appearance, innovative and 2. Small size, the thickness of thin, light weight, more conducive to the notebook computer keyboard light, thin, short, small and high-intelligent direction. 3. Moisture-proof, dust-proof, anti-oil pollution and harmful gases, sealing strong earthquake acid and basic resistance. 4. Long life, bending resistance.
Features/special features: Complies with ieee802.3 10base-t, &ieee802.3u 100base-tx standards 8 10/100mbps self-negotiable rj-45 ports; 1 uplink port Absolute separating technology, auto-separate port with troubles All ports support full duplex mode, support ieee802.3x full duplex flow control standard / half duplex back-pressure flow control Built-in 2m memory Support auto-negotiation technology, full/half duplex auto detection Built-in separate buffer to avoid lost of data package Store and forward Separately external dc power ensure stability of equipment Switch led indicator: 1 led (power) Port led indicator: 8 leds Power: dc7.5v/800a Operation temperature: 0 ~ 55 íµ Store temperature: -20 ~70 íµ Operation moisture: 10~90% Store moisture: 5~90% Approval: ulú¼culú¼tuvú¼ce Oem/odm packaging or generic retail packaging
Features/special features: External adsl modem, 4 10m/100m self-negotiation ethernet ports , convenient for 4 computers connection: Max downstream speed at 8mbps and max upstream speed at 1mbps Compatible with various terminal devices Low wastage, suitable for various conditions and environment friendly. User-oriented design for software/ hardware - ansi t1.413 - itu g.992.1 (g.Dmt) - itu g.992.2 (g.Lite) - optional voice filter - software upgradeable - supports 8 virtual circuit Operation system: windows 98 and above; computer of p586 or above, 16m (or bigger) memory; a lan card (10m or 10/100m self negotiation nic) multi-functional telephone line; 200m or more extra space in the hard-disk Operating temperature: 0íµí½40íµ Storage temperature: ú¡40íµí½85íµ Humidity: 10%í½90% Oem/odm packaging or generic retail packaging
Switch power Low price and high reliability 105 output capacitor Ac input power suitable for the world Hight efficiency and low operation temperature Soft-start current can reduce the ac input impact effecticly With short-circuit and owwerload protection Compact size, light weight 100% full-load burning test Installed with emi filter, minimum wave Carton packing
-On screen display -Resolutions: 800 x 600 pixels at 60Hz 800 x 600 pixels at 75Hz -1,024 x 768 pixels at 60Hz -Two types of connector: RCA and BNC -1 S-video input 1 VGA signal input and output -Supports plug-and-play function -No installation software is needed -PAL and NTSC switchable -Lightness, hue, contrast, saturation and color are adjustable via button and auto-store when power off -Image freezing function -Optional function: remote control Dimension:20.5x5.5x7cm
Boly electric co., located in wenzhou , south of zhejiang.The company has many years of experience in manufacturing in all kinds of wall switches and sockets , .Is the professional manufacturer in international market . The company not only supply wall switches but also make excellent mould of wall switches and breakers , meanwhile we also develop new products , ours products sell well all over the world .We will try our best to make best products for our licents . If you are interest in our products , welcome to contact with us at your convenience , we are sincerely looking forward to cooperating with you in the nearfuture.
DIP Switch
Created by Stephen Technologies Co.,LTD, The STE-228-X3X1 is a layer 2 fiber switch that offers along with multiple layer 3 features. The STE-228-X3X1 fiber optic switch is especially designed for telecom grade applications. It offers 24 10/100mbps fiber(SM or MM fiber), together with 4 gigabit combo ports. The combo ports of STE-228-X3X1 can be either 4 port gigabit copper, or 4 port gigabit sfp/gbic modules. It can also be configured as 2 10/100/1000Base-Tx ports, plus 2 gigabit SFP module ports. 1pc/box
Created by Stephen Technologies Co.,LTD, The STE-228-X3X1 is a layer 2 fiber switch that offers along with multiple layer 3 features. The STE-228-X3X1 fiber optic switch is especially designed for telecom grade applications. It offers 24 10/100mbps fiber(SM or MM fiber), together with 4 gigabit combo ports. The combo ports of STE-228-X3X1 can be either 4 port gigabit copper, or 4 port gigabit sfp/gbic modules. It can also be configured as 2 10/100/1000Base-Tx ports, plus 2 gigabit SFP module ports. 1pc/box
SFP Slot 10/100/1000M Optic Media Converter pls contact us for more details info[at]hongkien[dot]com 10/100/1000Base-TX to 1000Base-FX Converter Standards: IEEE802.3 IEEE802.3U, 10/100/1000Base-TX, 1000Base-FX Interface: 1x RJ-45 connector 1x SFP Slot Flow Control: TEEE802.3x Flow control for full duplex mode. Back-pressure flow control for half duplex model call
Mmds converter Input freq:2500 to 2700mhz Output freq:decided by customers L.O. Freq: 1838, 1998, 2030, 2033, 2065ú¼2278...2468 mhz Gain: 36+/-2db 1pc/pack
Membrane switch 1. Maximum circuit rating: 35vdc, 100ma, 1w 2. Contact resistance: 10¬+~ 500¬+ 3. Insulation resistance: 100m¬+ at 100vdc 4. Dielectric withstand: 250rms (50~60hz per min) 5. Contact bounce:
Membrane switches 1) maximum circuit rating: 35v dc, 100ma, 1W 2) contact resistance: 10 - 500ª+ (varied from the trace length and material) 3) insulation resistance: 100mª+ at 100v 4) dielectric withstand: 250v rms (50 - 60hz per min) 5) contact bounce: 5ms or less 6) actuation force: a) flat type 60 - 300g (2 - 10oz.) b) tactile type: 150 - 400g (6 - 14oz.) 7) switch stroke: a) flat type 0.1 - 0.5mm b) tactile type: 0.6 - 1.5mm 8) life expectancy: a) flat type: 5, 000, 000 closures or more b) tactile type: 1, 000, 000 closures or more 9) surface hardness: 3h or more 10) operating temperature: -40 ~ +80ípc 11) storage temperature: -40 ~ +85ípc 12) humidity: 90 - 95% (40ípc) for 240 hours
Emergency push button switches 1) mounting size: 22mm 2) operational voltage: 380ac or 220dc 3) operational temperation: -25 to +70 4)operational humidity: 45% to 90% 5) power-frequency withstand voltage: 2500v ac, 1min 6) contact resistance: 50m 7) mechanical durability: monentary 1000, 000, maintained 250, 000 8) electrical durability: 500, 000 9) protection grade: ip65
