An adequate source of kirloskar & grasso compressor spare parts, filter, discharge & suction valves, connecting rod, bearings, gasket kits, crankshafts, cylinder liner, sleeves, piston, piston ring, reed sets
A reliable source of sabroe smc, cmo & york compressor spare parts, filters controllers, temperature/ pressure sensors, sv dv reeds, valves, gasket, crankshaft, connecting rod, valve plates, piston kits available
An adequate source of Elgi compressor spare parts, filter, Seperator & Lube oil
A reliable source of carrier & carlyle compressor spare parts, filters, sv dv reeds, valves, gasket, crankshaft, connecting rod, valve plates, piston kits available
A reliable source of trane & york compressor spare parts, filters controllers, temperature/ pressure sensors, service kits available
The spare parts of the air compressor are collected from the demolish vessel. And most of the parts are unused.
45m3/h 7.5KW 150 bar 300bar Oil-Free oxygen booster gas compressor Industrial high-pressure gas air compressor The diaphragm compressor booster is a special structure of the volume-type compressor with high compression ratio, good leak tightness, compressed gas without lubricating oil and other solid impurities contaminated features, So it's suitable for high purity compression, rare, valuable, inflammable, explosive, toxic, harmful, corrosive, and high-pressure gas. Note: 1, In addition to the above-mentioned products we can also provide products used for compression of various gas and other specifications and models upon users' special requirement. 2, Clients' inquiries should contain related parameters A. The gas compression medium B. The flow rate: _____Nm3/hr C. Inlet pressure: _____ Bar D. Discharge pressure: _____ Bar E. Inlet temperature F. Cooling water temperature as well as other technical requirement.GZ Type Diaphragm Compressor Features A displacement compressor with a special, diaphragm compressor is characterized by a large compression ratio, good sealing performance, and that the compressed air will not be polluted by lubricant or other solid impurities. Therefore diaphragm compressor is applicable to compress high-purity, rare and precious, flammable and explosive, toxic and hazardous, corrosive and high_pressure gases. Keep in diaphragm compressors consist of four types that are Z type, V type, L type, and D type. The exhaust pressure ranges from 1.3 to 49Mpa. The products are widely used in the industries of national defense, scientific research, petrochemical, nuclear power, pharmaceutical,food-stuff, and gas separation. How does a diaphragm compressor work? Diaphragm compressor. A diaphragm compressor is a variant of the classic reciprocating compressor with backup and piston rings and rod seal. The compression of gas occurs using a flexible membrane, instead of an intake element. The back and forth moving membrane are driven by a rod and a crankshaft mechanism.
D-type Compressor Specification Keeping has developed models for 2D3.5,2D5.5,2D8,2D12,2D20,2D25,2D32,2D50 and 2D80 series compressors. T products are stable, reliable, and have already been in series and modularized. keep win can also rapidly provide products of other specifications through modular combination design upon users' requirements. Lubrication includes oil lubrication, low-oil lubrication, and oil-free lubrication; The cooling method includes Water cooling. Installation type includes: Stationary and Skid MountinD Type Reciprocating Compressor Features Keeping Process air/ gas Reciprocating compressors consist of four types that are V type, L type, and D type, P-type, M type. The exhaust pressure ranges from 0.2Mpa to 49 Mpa. The products are widely used in the industries of national defense, scientific research, petrochemical, nuclear power, pharmaceutical,food-stuff and gas separation.No gas pollution, and No gas leakage during compression and transportation process. Note: 1, In addition to the above-mentioned products we can also provide products used for compression of various gas and other specifications and models upon users' special requirement. 2, Clients' inquiries should contain related parameters A. The gas compression medium B. The flow rate: _____Nm3/hr C. Inlet pressure: _____ Bar D. Discharge pressure: _____ Bar E. Inlet temperature F. Cooling water temperature as well as another technical requirement.
The diaphragm compressor booster is a special structure of the volume-type compressor with high compression ratio, good leak tightness, compressed gas without lubricating oil and other solid impurities contaminated features, So it's suitable for high purity compression, rare, valuable, inflammable, explosive, toxic, harmful, corrosive, and high-pressure gas. Note: 1, In addition to the above-mentioned products we can also provide products used for compression of various gas and other specifications and models upon users' special requirement. 2, Clients' inquiries should contain related parameters A. The gas compression medium B. The flow rate: _____Nm3/hr C. Inlet pressure: _____ Bar D. Discharge pressure: _____ Bar E. Inlet temperature F. Cooling water temperature as well as another technical requirement.GZ Type Diaphragm Compressor Features A displacement compressor with a special, diaphragm compressor is characterized by a large compression ratio, good sealing performance, and that the compressed air will not be polluted by lubricant or other solid impurities. Therefore diaphragm compressor is applicable to compress high-purity, rare and precious, flammable and explosive, toxic and hazardous, corrosive and high_pressure gases. Keep in diaphragm compressors consist of four types that are Z type, V type, L type, and D type. The exhaust pressure ranges from 1.3 to 49Mpa. The products are widely used in the industries of national defense, scientific research, petrochemical, nuclear power, pharmaceutical,food-stuff, and gas separation. How does a diaphragm compressor work? Diaphragm compressor. A diaphragm compressor is a variant of the classic reciprocating compressor with backup and piston rings and rod seal. The compression of gas occurs using a flexible membrane, instead of an intake element. The back and forth moving membrane are driven by a rod and a crankshaft mechanism.
Diaphragm Compressor Features of products: 1. Compressed gas is completely sealed from outside, which provides high sealing performance; the compressor of high sealing performance is specially suitable for use to compress gas in radioactive area of nuclear power plant and highly poisonous gas; 2. Owing to nonexistence of lubricant in diaphragm cavity, namely it is impossible for gas to contact any lubricant, there is no problem to compress to higher pressure the dangerous gas and oxygen, fluorinated gas and chlorine, etc; 3. Compared to the compressors of other types, gas will not be polluted by the particles produced due to abrasion of sliding parts, therefore, it is absolutely ensured the same purity of compressed gas as that of the gas when entering compressor. Therefore, it is suitable for high purity gas such as electronic gas, breathing gas and hydrogen used in fuel cell technology; 4.Diaphragm alarm device and low-pressure alarm of lubricating oil ensure safety and reliability of operation of compressor;We offer a wide variety and types of diaphragm compressors. You can install these in many different scenarios. It is possible to install the compressors in hydrogen houses between and electrolyzer and a storage system, in businesses to support their needs such as ice cream companies for hydrogenation, at farmers where they use it to produce ammonia as a fuel at the back of a wind farm or solar farm, and refineries to pressure the hydrogen before it is being used to clean up the gas or oil. There are also many applications for our H2 gas compressors. For instance, you can also use the diaphragm compressor in green hydrogen transport applications, energy storage solutions, grid balancing, food processing, and power station cooling. We pride ourselves at ensuring that as many applications of our compressor units use renewable electricity to pressure the hydrogen. Each of our H2 compressor units is unique. It is built to your needs all with the latest innovations in hydrogen compression, safety, and operation. We offer different hydrogen flow and pressures all set to match your storage working pressure. We can customize hydrogen into different types of storage systems at 150bar 200 bar, 350 bar (5000 psi), 450 bar, 500 bar, 700 bar (10,000 psi), 900 bar (13,000 psi).
KEEPWIN TECHNOLOGY HEBEI CO.,LTD is a good stable quality supplier in China compressor factory, located in Hebei Province gas compressor manufacturing base and supplier of air gas system. The factory has advanced assembly, production line and testing equipment to support us to develop, design and Manufacture screw compressor, piston compressor, reciprocating compressor, diaphragm compressor, CNG compressor, CO2 compressor, Hydrogen compressor, Nitrogen booster compressor, etc that comply with the regulation of ISO9001:2008 quality system. Keepwin gas compressor are widely used in each Industry, such as Oil Industry, Chemical, Electronic, Garment, Plastic, Glass, Cement, Water treatment, Agriculture, Food, Construction, Joinery, etc. We view client satisfaction as the witness of our products' utility and application in all environments. In line with it, we have developed a general framework for comprehending new developments in the compressor industry.Reliable and economical performance Threaded pipelines of the heat exchanger increase the using rate of cooling air The evaporator is made from laminose copper pipeline with aluminum flake, high efficiency, and low energy consumption Condenser made from fin copper, good heat exchanging rate without freeze and jam Environmental friendly Aluminum-alloy-made heat exchangers never get rusted, strong anti-corrosion property, pollution reoccurrence free. Environmental cooling medium adopted across the series, keeping up with the international trends of environment protection Top configuration The whole series of refrigerated compressors are of first-class brands, such as PERFORMER, KERRY, COPELAND, and MANEUROP Whole series of refrigeration control elements are of first-class brands, such as DANFOSS and ALCO Whole series of air coolers adopt nanometer anti-corrosion coating on the surfaces Total Control Easy to use controller automatically manages dryer operation while monitoring critical parameters for optimum air treatment and efficiency Flexible Design Air-cooled and water-cooled options and compact size to fit any application Easy for installation and free maintenance
Description: Cast iron compressor part, Refrigeration compressor housing,high nickle cast iron
Energy-saving principle and effect of permanent magnet variable frequency air compressor: High-efficiency compressor mainframe produced by advanced screw profile technology; The ingenious design of the intake and exhaust system ensures that the compressor sucks in colder air at a lower temperature and improves the compression efficiency; The exhaust pipeline and exhaust port design fully consider the margin and reduce the turbulence to minimize the exhaust pressure resistance; The centrifugal suction fan ensures that each fin of the radiator is effectively used; The high-efficiency permanent magnet variable frequency motor adopts the IP54 structure and has an independent cooling fan to ensure that the motor itself does not have a high temperature when the compressor is running at low speed, and fundamentally avoids the phenomenon of magnetic weakening and demagnetization of the permanent magnet motor due to high temperature; Advanced and scientific design concept, cold and hot partition of the whole machine, detailed design for every bit to improve efficiency.
Application: Industrial purpose Type : Reciprocating compressor Make : Demag/ Dresser Rand/ Flowserve/ Elgi Model : TS 15 LB Free Air delivery : 44.1 CFM (1250 lpm) Maximum Pressure : 175 PSI (12 Kgf/cm�²) Piston displacement : 54.3 CFM (1535 lpm) Motor Power : 11 KW (15 HP) Air receiver: 500 Liters Rotating speed: 1150 Rpm Net Weight : 470 Kg
Application : Industrial purpose Type : Reciprocating compressor Make : Demag/ Dresser Rand/ Flowserve/ Elgi Model : SS 15 LB Free Air delivery: 49.1 CFM (1390 lpm) Maximum Pressure : 128 PSI (9 Kgf/cm²) Piston displacement : 66.4 CFM (1853 lpm) Motor Power : 11 KW (15 HP) Air receiver : 500 Liters Rotating speed: 925 Rpm Net Weight : 514 Kg
Application: Drilling Rig Type : Air screw compressor Make: ELGI/ Atlas Copco/ Doosan-IR Model : XRV 1200 Excel/ PG 1200S Maximum Air delivery: 1200 CFM (33.98 m�³/min) Maximum Pressure: 300 PSI (23.2 Kgf/cm�²) Engine : NTA 855 BC, Cummins Length : 3942 - 4326 mm Width: 1600 - 1790 mm Height:1865 - 1956 mm Dry Weight: 4100 - 5050 Kgs
Application : Drilling Rig Type : Air screw compressor Make : ELGI/ Atlas Copco/ Doosan-I Model : XRH 1100 Excel/ PG 1100S-300 Maximum Air delivery :1100 CFM (31.15 m�³/min) Maximum Pressure : 300 PSI (21.1 Kgf/cm�²) Engine : NTA 855 BC, Cummins Length: 3942 - 4326 mm Width : 1600 - 1790 mm Height : 1865 - 1956 mm Dry Weight : 4100 - 5050 Kgs
Application : Drilling Rig Type : Air screw compressor Make : ELGI/ Atlas Copco/ Doosan-IR Model : PG 600S-200/ XAVS 600 Maximum Air delivery : 600 CFM (16.99 m�³/min) Maximum Pressure :200 PSI (14.1 Kgf/cm�²) Engine : 6 CTA 8.3, Cummins Length : 3115 -5453 mm Width: 1250 -1927 mm Height : 1620 - 2066 mm Dry Weight : 2520 Kgs
Danfoss Compressor MT40JH4EVE,Danfoss MT40JH4EVE,Danfoss Compressor,refrigeration compressor,Compressor Global first-tier brand compressor trading platform which is
Danfoss Compressor MT36JG4EVE, Danfoss MT36JG4EVE, Danfoss Compressor,refrigeration compressor,Compressor Global first-tier brand compressor trading platform which is okmarts.com.
