NQG-5III Rail Cutting Machine NQG-5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m 75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc.
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
YCD-2 hydraulic Turnout Tamping Machine YCD-2 hydraulic turnout tamping machine is a special maintenance mechanical equipment for railway turnouts. it is mainly used for tamping the sleeper ballast in the turnout section, and can also take into account the tamping effect of the main track bed ballast. BENEFITS This machine uses Honda gasoline engine GX390 as power, light weight, easy to start, at low the low noise and low plution. which great improves the working environment of workers and reduces labor intensity
Hydraulic Rail Puller Rail Tensor,its suitable for rail 50kg/m,60kg/m and 75kg/m type rail stress relief and seamless long rail relaying. While operating in the field at a certain temperature range being lower than the rail locking temperature, by employing this machine, the length of a rail with zero-stress can be forced to stretch to a length at locking temperature, then re-lock the rail. By locking the rail waist, it will not hurt the rail head surface, one machine with a variety of configuration meets the field work in different ways, it possesses features of unique design, light weight, simple & convenient manipulation and powerful rail pulling force. The machine can not only be used for repairing the broken rails of seamless tracks, but also can be used for stress relief of seamless tracks and section adjustment of track seams in common tracks, and is suitable for various rail types. Using this product can change the traditional method of repairing broken rails, that is, re-welding in situ without inserting short rails, saving time , Save labor, expand the operating rail temperature range, and prevent the actual lock rail temperature from changing.
YQBJ-300*130 Railway Track Lifting and Lining Machine This product has the fuction of lifting and lining. Its structure is simple, light, flexible, safe and reliable. This machine is powered by Honda GX390 petrol engine, drives gear pump, and controls the work of each cylinder by multi-way reversing, valve, so as to realize the movement of machine in place, hook rail, tilt and lift.
This flatness measuring instrument is mainly designed for flatness measurement and recording in rail welding seam construction, maintenance and monitoring. It is widely used in construction and maintenance units of various seamless rail transit infrastructure construction and maintenance units, such as track maintenance departments, rail welding bases, construction engineering companies, subway construction and maintenance parties, scientific research institutes, etc.
It is a high precision, lightweight and portable tool for performing fast and reliable cross-sectional rail profile measurements to monitor and analyze the wear of rails. It is available for all type of rails, including grooved rails. Magnetically attached to the top of the railhead, the rail profile is measured in one single measurement in less than 5 seconds. Each one is delivered with the innovative and user-friendly software package. It includes the app for Android for easy data collection in the field and the vast software package for basic and advanced data studies and analysis. It can suit any userâ??s needs for easy building of measurement schemes, batch processing, references, creating templates and macros, live alarms, trend analysis, wear, grinding, evaluation, equivalent conicity and much more. Vertical, horizontal and angled wear are displayed instantly after each measurement in real time view. Numerous additional calculations and alignments are included in the powerful Envision software for basic to advanced data handling, analyzing and reporting.
The rail internal combustion rail sawing machine is a new generation of internal combustion rail cutting machine based on the original rail internal combustion rail cutting machine of our company. It is based on the actual requirements of the on-site construction unit, greatly reducing the weight and increasing the cutting speed. It is an ideal rail cutting tool for railway engineering, bridge, line overhaul and other departments. It is suitable for laying railways, line maintenance and emergency repairs, especially for cutting rails in sections and intervals without power supply. It can be applied to various specifications of rails, especially for 50kg/m-60 kg/m rails.
Hydraulic rail bending machine This hydraulic rail bending machine is used for the bending operation of railway seam lines and welded joints of seamless tracks and other low-collapsed parts of steel rails. It can also be used as vertical bending and supporting equipment in the laying of seamless tracks; suitable for all types Rails. The machine has simple structure, convenient operation, safe operation and easy maintenance. It is an effective tool for rectifying rail joint problems
Contact rail gauge for METRO measurement The contact rail gauge is a gauge for measuring the parameters of the subway contact rail. Measurement parameters can be customized according to customer requirments,detachable and easy to carry. the main ruler body use high strengthsquare tube aluminum alloy. advantages:precise measurement,new style,reasonable design. Model LJ-JCG-I Vertical Measure range customize Horizontal Measure range customize Accuracy 0.5mm
Contact rail gauge for METRO measurement The contact rail gauge is a gauge for measuring the parameters of the subway contact rail. Measurement parameters can be customized according to customer requirments,detachable and easy to carry. the main ruler body use high strengthsquare tube aluminum alloy. advantages:precise measurement,new style,reasonable design.
Railway Track Square Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track. Benefits 1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm 2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance 3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely. 4.Customizable 5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions 1 Measure the switch angle steel whether is square when installed 2 Measure the internal lock switch parts whether is square when installed 3 Measure the switch rail whether creeping 4 Measure the sleeper whether square when installed.
Rail Feeler Gauges Rail Feeler Gauges is used for inspecting clearance BENEFITS Strong toughness, disassembly design, accurate measurement, not easy to rust
ND-1 Portable Rail Tamper ND-1 portable tamper is a special machine for ballast tamping on railway lines and turmouts. Choose high-vibration, high-power gasoline engine as power, with high output power and stable. performance. The air compression hammer impact pick is used to impact the ballat. The impact force is large and the tamping effect is good. The whole machin is smal in size, ight. in. weight, and convenient. to go up and down, which can ffectively guarantee driving safety during operation.
Electric Rail Grinding Machine The design of FMG-2.2 electric rail profile grinder allows you accurate and stable profile grinding up to 90�°about the rail head by rotation of the machine using its turming device and its inclinable operating arm. According to customer needs, 380V three-phase motor can be selected as power or 220V single-phase power as power. With good visibility of the grinding area assures you of a high quality finish.
Hydraulic Track Gauge Adjuster Hydraulic Track Gauge Adjuster is used for the diversion operation of ballastless high-speed railway lines and turnouts. When in use, the support mechanism is passed through the bottom of two steel rails, one end is clamped on one steel rail, and the hydraulic working mechanism is placed on the inner or outer side of the other steel rail of the support mechanism to adjust the track gauge, achieving the purpose of diversion operation
Track Gauge Calibration Device The calibrator is a railway measuring instrument that used to calibrate the 1435mm track gauge, the guard rail check gauge, the guard rail face gauge and the super-elevation.
Magnetic Rail Versine Measuring Kits Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate.
Magnetic Rail Versine Measuring Kits Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate.
L-shaped track ruler(right-angle track) is a special measuring tool used for measuring the distance between the inner side of railway track and the base mark and the height between the plane on the rail and the base mark.
