PVDF / FEVE - coated aluminum coil Product Introduction: PVDF paints are featured with excellent performance in alkaline resistance, anti-corrosion and weather resistance. Due to its low tension on surface, PVDF paints are contamination resistant and self-cleaning. They are the first choice for the application of high-end architectures. It can be widely used in exterior environment, the warranty is more than 10~15 years. PVDF Coated Aluminium Coil PVDF Coated Aluminium Coil is a type of fluoropolymer that is used in a variety of applications, including as a coating for metal coils. PVDF coatings are known for their excellent durability, chemical resistance, and UV resistance, making them well-suited for use in outdoor applications and in environments where the coating may be exposed to harsh chemicals or UV radiation. Coil coating is a process in which a thin layer of PVDF is applied to a metal coil, typically made of aluminum or steel. The coil is first cleaned and pretreated, and then the PVDF coating is applied using a variety of methods, such as roll coating, spray coating, or electrocoating. Once the coating has been applied, it is cured using heat or UV light to ensure that it adheres properly to the metal surface. PVDF Coated Aluminium Coil is commonly used in a range of applications, including in the construction industry for building facades, roofing systems, and siding. It is also used in the automotive and transportation industries, as well as in the manufacturing of appliances and other consumer products. PVDF coated aluminium coils are known for their excellent performance characteristics, including high resistance to fading, chalking, and peeling, as well as excellent adhesion to the metal surface. They are also resistant to a wide range of chemicals, making them suitable for use in industrial and commercial environments.
Coil Coated Aluminium Aluminum coil coating is a kind of polyester coating coil. It has the characteristics of high weather resistance, which can effectively improve the anti-ultraviolet ability and prolong the service life of outdoor use. Painted Aluminium Coil Painted aluminium coil is an industrial process used to produce pre-coated aluminum coils. Different types of coatings are available: anodized, painted, liquid or powder coating. This method is used to promote the use of aluminum in most environmental conditions. For this reason, the application of coil coating involves two major industries: architecture and interior design. Painted aluminium coil is the process of applying a protective layer or coating to aluminum coils or sheets. The coating is typically applied using a continuous coil coating process, in which the aluminum is passed through a series of coating stations on a continuous production line. The coating material is applied to the aluminum using a variety of techniques, such as roll coating, spray coating, or electrostatic coating.
Aluminium coilsin mill finiish or color coated form . Ranging from gauge of 0.2 to 4.00 mm ifor varied applications like Industrial, Electrical, Automotive, Defence, Aerospace, Aviation, Consumer Durables and other transport applications. Whole range of grades like 1100, 1200, 1145, 3003, 3005, 3004, 3105, 5005 can be supplied.
Aluminum Coil Spplier A coated aluminum coil refers to an aluminum coil that has been treated with a specialized coating or layer, typically through a process known as coil coating. This process involves applying a protective and often decorative coating onto the surface of the aluminum coil, enhancing its properties for various applications. Advantage Protection and Durability: The primary purpose of coating aluminum coils is to provide a protective barrier against environmental factors such as UV radiation, moisture, chemicals, and corrosion. This extends the lifespan of the aluminum and maintains its appearance over time. Types of Coatings: Coated aluminum coils can be treated with a variety of coatings, including polyester, polyurethane, acrylic, epoxy, and fluorocarbon (PVDF) coatings. Each type offers specific advantages in terms of durability, color retention, and performance under different conditions. Aesthetic Enhancement: Coated aluminum coils are available in a wide range of colors and finishes, allowing for customization to match specific design preferences. This makes them popular for architectural projects and decorative applications. Architectural and Construction: Coated aluminum coils find extensive use in the construction industry for applications such as cladding, roofing, wall panels, and exterior facades. The coatings enhance both the appearance and protection of buildings. Transportation: The lightweight nature of aluminum combined with its coated surface makes it suitable for transportation applications. Coated aluminum coils are used in vehicle panels, trailers, and other automotive components. Appliances: Coated aluminum is used in the manufacturing of appliances like refrigerators, ovens, and air conditioners due to its resistance to wear, corrosion, and exposure to household chemicals. Signage and Displays: The ability to achieve vibrant and long-lasting colors makes coated aluminum coils a preferred choice for outdoor signage, billboards, and displays. Packaging: Some forms of coated aluminum are used in packaging materials for food and beverage products due to their protective qualities and ability to maintain a clean appearance. Furniture and Interior Design: Coated aluminum coils are utilized in the creation of modern furniture pieces, as well as interior design elements like wall panels, ceilings, and partitions. Electronics: The lightweight and non-corrosive properties of coated aluminum make it suitable for electronic device casings and housings. Solar Industry: Coated aluminum is used in the construction of solar panels to provide durable framing and protection for the sensitive solar cells.
Aluminium Coils for Roofing System Aluminum coil material contains Manganese, Magnesium, Copper, Zinc, Iron, Tin and other alloy components, with high strength and good weather resistance, stain resistance, easy welding and bending processing, and more than 50 years of architectural design service life, etc., is widely used in roofing and exterior wall materials. Related Aluminum alloy grades are: 1. 6XXX series of aluminum alloy has higher strength, the main alloy is Magnesium, Silicon, Iron, generally as an extruded profile, used as curtain wall, daylighting roof keel and tans. 2. 3004 alloy grade: Aluminum,Magnesium,Manganese (AlMn1Mg1), due to moderate structural strength, weather resistance, stain resistance, easy welding bending processing, is generally recognized as a building design service life of more than 50 years of roof wall materials; 3.5052 alloy: ship grade alloy material, according to the Marine climate architectural design, can choose 5052 aluminum alloy with stronger corrosion resistance.
Aluminium Alloy Thickness(mm) Width(mm) Temper 1000,2000,3000,5000,6000,7000,8000 series 0.2-8.0/customized 20-2300/customized O,H12,H14,H16,H18,H22,H24,H26 Material process CC AND DC Customerize size Size can be produced as per clients requirement Surface Mill finish ,Color coated(PVDF& PE),Stucco Embossed ,Bright Polish,Anodizing Mirror,Brush,Perforated,Tread plate ,Corrugated etc Quality Standard ASTM B209,EN573-1 MOQ per size 1 ton Payment Terms TT OR LC at sight Delivery time Within 25 days after receipt the lc or deposit Material Quality ension levelled ,flat ,Free of defects like oil stain,Roll Marks,Waves,Dents scratches etc ,A+++ quality, production process passed sgs and bv inspection Application Construction ,Building,Decoration ,Curtain Wall ,Roofing,Mould,Lighting, curtain wall, ship building,Aircraft,Oil Tank ,Truck Body etc Packing Standard export worthy wooden pallets/ as requirement
PVDF / FEVE - coated aluminum coil Product Introduction: PVDF paints are featured with excellent performance in alkaline resistance, anti-corrosion and weather resistance. Due to its low tension on surface, PVDF paints are contamination resistant and self-cleaning. They are the first choice for the application of high-end architectures. It can be widely used in exterior environment, the warranty is more than 10~15 years. PVDF Coated Aluminium Coil is a type of fluoropolymer that is used in a variety of applications, including as a coating for metal coils. PVDF coatings are known for their excellent durability, chemical resistance, and UV resistance, making them well-suited for use in outdoor applications and in environments where the coating may be exposed to harsh chemicals or UV radiation. Coil coating is a process in which a thin layer of PVDF is applied to a metal coil, typically made of aluminum or steel. The coil is first cleaned and pretreated, and then the PVDF coating is applied using a variety of methods, such as roll coating, spray coating, or electrocoating. Once the coating has been applied, it is cured using heat or UV light to ensure that it adheres properly to the metal surface. PVDF Coated Aluminium Coil is commonly used in a range of applications, including in the construction industry for building facades, roofing systems, and siding. It is also used in the automotive and transportation industries, as well as in the manufacturing of appliances and other consumer products. PVDF coated aluminium coils are known for their excellent performance characteristics, including high resistance to fading, chalking, and peeling, as well as excellent adhesion to the metal surface. They are also resistant to a wide range of chemicals, making them suitable for use in industrial and commercial environments. Product parameter-PVDF Coated Aluminum Coil Thickness: 0.18mm-1.6mm Usual Alloy: 1100, 8011, 3003, 5052, others alloy: according to your requirement. Per coil weights: 5MT Usual Width: 1200mm, 1240mm, 1270mm, 1520mm, 1570mm, others width: according to your requirments.
Coated Aluminum Coil A coated aluminum coil refers to an aluminum coil that has been treated with a specialized coating or layer, typically through a process known as coil coating. This process involves applying a protective and often decorative coating onto the surface of the aluminum coil, enhancing its properties for various applications. Advantage Protection and Durability: The primary purpose of coating aluminum coils is to provide a protective barrier against environmental factors such as UV radiation, moisture, chemicals, and corrosion. This extends the lifespan of the aluminum and maintains its appearance over time. Types of Coatings: Coated aluminum coils can be treated with a variety of coatings, including polyester, polyurethane, acrylic, epoxy, and fluorocarbon (PVDF) coatings. Each type offers specific advantages in terms of durability, color retention, and performance under different conditions. Aesthetic Enhancement: Coated aluminum coils are available in a wide range of colors and finishes, allowing for customization to match specific design preferences. This makes them popular for architectural projects and decorative applications. Architectural and Construction: Coated aluminum coils find extensive use in the construction industry for applications such as cladding, roofing, wall panels, and exterior facades. The coatings enhance both the appearance and protection of buildings. Transportation: The lightweight nature of aluminum combined with its coated surface makes it suitable for transportation applications. Coated aluminum coils are used in vehicle panels, trailers, and other automotive components. Appliances: Coated aluminum is used in the manufacturing of appliances like refrigerators, ovens, and air conditioners due to its resistance to wear, corrosion, and exposure to household chemicals. Signage and Displays: The ability to achieve vibrant and long-lasting colors makes coated aluminum coils a preferred choice for outdoor signage, billboards, and displays. Packaging: Some forms of coated aluminum are used in packaging materials for food and beverage products due to their protective qualities and ability to maintain a clean appearance. Furniture and Interior Design: Coated aluminum coils are utilized in the creation of modern furniture pieces, as well as interior design elements like wall panels, ceilings, and partitions. Electronics: The lightweight and non-corrosive properties of coated aluminum make it suitable for electronic device casings and housings. Solar Industry: Coated aluminum is used in the construction of solar panels to provide durable framing and protection for the sensitive solar cells.
Color coated aluminum coil is the surface coating of aluminum plate coloring treatment. Common fluorocarbon color-coated aluminum and polyester color-coated aluminum are widely used in aluminum-plastic panels, aluminum veneers, aluminum honeycomb panels, aluminum ceilings, roofs, corners, Easy-open cans, electronic products. Its performance is very stable, it is not easy to be corroded, the surface can be guaranteed for 30 years after special treatment, the unit volume weight is the lightest metal material, and the color-coated aluminum coil is the most popular new material. Color-coated aluminum coil has rich colors, whether it is a residence, a large commercial outlet or a large exhibition center, it can add color. Good plasticity and machinability make it an ideal material for various architectural shapes. It provides architects, designers and homeowners with a personalized exterior wall and ceiling color space, and is an ideal material for architectural styling. Whether it is a multi-functional large building or a unique and innovative new building, it can always meet the different requirements of modern and classical architectural styles, making the building more colorful. Surface Coating PVDF color coated aluminum coil PVDF color-coated aluminum coils are made of PVDF coatings from well-known brands such as PPG, VALSPAR, NIPPON, etc., which are coated on both sides or three layers and baked at high temperature to form a cured coating with a thickness of 25-35�¼m. Since PVDF coating has corrosion resistance, high weather resistance, strong adhesion, high self-cleaning ability and maintenance-free, aluminum coated coil can keep color fast and durable for 10-15 years. PE Color Coated Aluminum Coil PE (polyester) coating is a UV resistant coating. According to the coating gloss, it can be divided into matt and high gloss. The dense molecular structure makes the lacquer glossy and smooth, which ensures good printing on the panel surface. Comes with a 7-year weatherproof warranty. Main Feature 1. Good temperature resistance The melting point of aluminum is 660 degrees, and the general temperature cannot reach its melting point. 2. Environmental protection It is not easy to turn yellow, and the chromium-free treatment solution is used to make up for the defect that the film-coated board is easy to change color; the roller coating contains active chemical molecules, which promotes the formation of a protective layer on the surface of the material. The active chemical molecules are stable, easy to recycle and meet the environmental protection requirements. 3. Corrosion resistance Due to its dense surface oxide film, it has strong adhesion, oxidation resistance, acid resistance, alkali resistance, corrosion resistance, decay resistance and UV resistance.
Product Aluminum coil Surface Smooth Embossed Miorror Polished etc 2000series:2104 2017 2024 2124 2219 2a02 2a11 2a14 Thickness:0.3-6mm(Customized Service) MOQ:3ton Size:Customized Service Payment Terms:30% T/T+70% Balance Lead Time 7-15 working days Sample:Freely Price term:CIF CFR FOB EX-WORK Packing:Standard Exporting Seaworthy Packing
We are a professional coated aluminium coil factory in China, producing high-quality color-coated aluminum coil with beautiful color, wear resistance and a wide range of applications. Our products have passed ISO and SGS certifications and can be customized according to customers' requirements. Contact us to send customized requests. Product Introduction Coated aluminium coil is the surface coloring treatment of aluminum plate, common fluorocarbon color coated aluminum, polyester color coated aluminum, widely used in the aluminum composite panel, aluminum veneer, aluminum honeycomb panel, aluminum ceiling, roofing, angles, easy to open cans, electronic products. Its performance is very stable, not easy to be corroded, the surface can reach 20 years of quality assurance after special treatment, the weight per unit volume is the lightest metal material, color coated aluminum coil is the most popular new material. Surface coating Coated aluminium coil as the name implies is the surface coating and coloring treatment of aluminum coil or aluminum plate, mainly divided into PVDF (fluorocarbon) coated aluminum coils, FEVE (fluorine vinyl ether) coated aluminum coils, HDPE (high-density polyethylene) coated aluminum coils, PE (polyester) coated aluminum coils.
Color coated aluminum coils have the following characteristics Flatness: no compound high-temperature indentation on the surface. No residual stress on the board surface, no deformation after shearing. Weather resistance: The paint pattern made by coating and high-temperature baking has high light retention, good color stability and minimal color variation. Polyester paint warranty of 10 years, fluorocarbon paint warranty of 20 years or more. Decoration: Painted wood grain, and stone grain, with a realistic sense of real materials, with a fresh and natural sense of beauty. The pattern is arbitrary, giving customers a wide range of personalized choices, enriching the humanistic connotation of the product and giving more beautiful enjoyment. â?º Mechanical: High-quality aluminum, plastic and adhesive are used, and advanced composite technology is adopted. The products have the bending and flexural strength required for decorative panels. In four seasons, changes in wind pressure, temperature, humidity and other factors will not cause bending, deformation and expansion. â?º Environmental protection: Resistant to salt, alkali, acid and rain corrosion, will not corrode and produce toxic bacteria, will not release toxic gas, will not cause corrosion to keel and fixed parts, flame retardant. According to the national regulations, not less than the B1 level.
Aluminum Coil Aluminum coil Characteristic: 1)Excellent weather-proof durability 2)Anti-ultraviolet 3)High erosion resistance 4)Stable color and gloss 5)Good mechanical processing performance 6)Abrasion resistance 7)Anti-impact 8)High flexibility Categories: Aluminum, New Products Description 1.Tolerance: thickness tolerance +/-1.5%, width tolerance +/-1mm 2.Application and Usage: Building Material, Insulation, Shoes &Tents Eyes, Corner Beads, Automotive Industrial, POP Can Bottle and Cap,Deep-Proceeding Case, light industry, TV back board, Street Sign, PP caps, Cell mask and so on. 3.Surfact Quality: Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Dicoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks and other defect which will interfere with use. 4.Mechenical Property: Chemical Composite and Mechanical Property could meet the requirements of GB/T, ASTM, ENAW, JIS Standard. 5.Packaging: First, plastic cloth with drying agent inside; Second, Pearl Wool; Third, wooden cases with dry agent , fumigation wooden pallets, aluminum surface could cover blue PVC film. 6.Certificate: ISO9001:2008, SGS and ROHS(if client request, paid by client), MTC(plant provided), Certificate of Origin(FORM A, FORM E, CO), Bureau Veritas and SGS (if client request, paid by client), CIQS certificate. 7.Month Capacity: 20000MT/Month 8.Trade Terms: EXW, FOB, CIF, CNF 9.Payment: T/T or L/C at sight Supply Ability Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Discoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks and other defect which will interfere with use. Surface without black line, clean cut, periodic stain, roller printing defects, such as other gko internal Control standards. You canâ??t see any tiny space between the plates when they are piled up. And the surface is smoothly without freckles.
ALUMINIUM COIL Thickness 0.2mm - 1.2mm Width 25 - 55mm | ID 300 / 500mm | OD 500 - 1300mm Thickness 0.2mm - 3.5mm Width max. 1.300mm | ID 500 / 600mm | OD max. 1400mm Thickness 3.5mm - 5.5mm Width max. 1.300mm ALUMINIUM FLAT SHEET Thickness 0.2mm - 3.5mm Width max. 1.300mm | Length 800 - 3800mm
carbon coated aluminum tape for Electric double layer capacitor a) Total Width: 250.0 +/-1.0mm b) Free Margin each end 15.0 +/-1.0mm c) Total Thickness: 0.200 +/- 0.020mm d) Al. Foil thickness: 0.20 +/- 0.002mm e) Density of the active layer: 0.61gm/cc - minimum f) Mother Roll Core ID = 76.2mm g) Porosity of Activated Carbon: 0.7cm3/gm h) Purity of Al. Foil: >99.7% i) Specific Capacitance of the Active Layer: 12000f/m2 j) Volume resistivity of the Active layer: 20.0 Ohms - Max.
We are a factory from China. We mainly produce aluminum foil, aluminum strip, aluminum plate, aluminum foil processing products, etc. the alloys are mainly 1060, 8011, 3105, 3003, 8079, 5052, 5083, etc. the thickness is 0.006-3.0mm and the width is 10-2000mm. If you are interested, we are happy to offer you the best price.
Aluminium coil: Alloy:1100/1050/1050/1060/1070/1080/3003/3004/3005/3104/3105/5052/5754/5454/5182/8011 ect. Temper:HO,H12,H14,H16,H18,H19,H32 Thickness:0.15mm-12mm Width:20mm-240mm Max Width:2650mm
Product Name: Aluminum coils Standard: AISI, ASTM, BS, DIN, GB, JIS Alloy: 1050, 1060, 1100, 3003, 3A21, 5005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8011, 8079, 8021,etc. Temper: H12,H14,H16,H18,H22,H24,H26,O,F,H112,etc Surface: Bright, Polished, Hair line, Brush, Embossed, etc. Processing Service: Bending, Decoiling, Welding, Punching, Cutting Thickness: 0.014-20mm Width: 20-2600mm Coil weight: Customized MOQ: 1 Ton Capacity: 200,000 tons/year Delivery time: "1-100 tons, 7-10 days >100 tons, Negotiable" Packing Standard: exporting packing or as requirements Payment terms: TT, L/C, Western Union, etc
Product Name: Aluminum coils Standard: AISI, ASTM, BS, DIN, GB, JIS Alloy: 1050, 1060, 1100, 3003, 3A21, 5005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8011, 8079, 8021,etc. Temper: H12,H14,H16,H18,H22,H24,H26,O,F,H112,etc Surface: Bright, Polished, Hair line, Brush, Embossed, etc. Processing Service: Bending, Decoiling, Welding, Punching, Cutting Thickness: 0.014-20mm Width: 20-2600mm Coil weight: Customized MOQ: 1 Ton Capacity: 200,000 tons/year Delivery time: "1-100 tons, 7-10 days >100 tons, Negotiable" Packing Standard: exporting packing or as requirements Payment terms: TT, L/C, Western Union, etc
Product Name: Aluminum coils Standard: AISI, ASTM, BS, DIN, GB, JIS Alloy: 1050, 1060, 1100, 3003, 3A21, 5005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8011, 8079, 8021,etc. Temper: H12,H14,H16,H18,H22,H24,H26,O,F,H112,etc Surface: Bright, Polished, Hair line, Brush, Embossed, etc. Processing Service: Bending, Decoiling, Welding, Punching, Cutting Thickness: 0.014-20mm Width: 20-2600mm Coil weight: Customized MOQ: 1 Ton Capacity: 200,000 tons/year Delivery time: "1-100 tons, 7-10 days >100 tons, Negotiable" Packing Standard: exporting packing or as requirements Payment terms: TT, L/C, Western Union, etc
