PVDF / FEVE - coated aluminum coil
Product Introduction: PVDF paints are featured with excellent performance in alkaline resistance, anti-corrosion and weather resistance. Due to its low tension on surface, PVDF paints are contamination resistant and self-cleaning. They are the first choice for the application of high-end architectures. It can be widely used in exterior environment, the warranty is more than 10~15 years.
PVDF Coated Aluminium Coil is a type of fluoropolymer that is used in a variety of applications, including as a coating for metal coils. PVDF coatings are known for their excellent durability, chemical resistance, and UV resistance, making them well-suited for use in outdoor applications and in environments where the coating may be exposed to harsh chemicals or UV radiation.
Coil coating is a process in which a thin layer of PVDF is applied to a metal coil, typically made of aluminum or steel. The coil is first cleaned and pretreated, and then the PVDF coating is applied using a variety of methods, such as roll coating, spray coating, or electrocoating. Once the coating has been applied, it is cured using heat or UV light to ensure that it adheres properly to the metal surface.
PVDF Coated Aluminium Coil is commonly used in a range of applications, including in the construction industry for building facades, roofing systems, and siding. It is also used in the automotive and transportation industries, as well as in the manufacturing of appliances and other consumer products.
PVDF coated aluminium coils are known for their excellent performance characteristics, including high resistance to fading, chalking, and peeling, as well as excellent adhesion to the metal surface. They are also resistant to a wide range of chemicals, making them suitable for use in industrial and commercial environments.
Product parameter-PVDF Coated Aluminum Coil
Thickness: 0.18mm-1.6mm
Usual Alloy: 1100, 8011, 3003, 5052, others alloy: according to your requirement.
Per coil weights: 5MT
Usual Width: 1200mm, 1240mm, 1270mm, 1520mm, 1570mm, others width: according to your requirments.
PVDF / FEVE - coated aluminum coil Product Introduction: PVDF paints are featured with excellent performance in alkaline resistance, anti-corrosion and weather resistance. Due to its low tension on surface, PVDF paints are contamination resistant and self-cleaning. They are the first choice for the application of high-end architectures. It can be widely used in exterior environment, the warranty is more than 10~15 years. PVDF Coated Aluminium Coil PVDF Coated Aluminium Coil is a type of fluoropolymer that is used in a variety of applications, including as a coating for metal coils. PVDF coatings are known for their excellent durability, chemical resistance, and UV resistance, making them well-suited for use in outdoor applications and in environments where the coating may be exposed to harsh chemicals or UV radiation. Coil coating is a process in which a thin layer of PVDF is applied to a metal coil, typically made of aluminum or steel. The coil is first cleaned and pretreated, and then the PVDF coating is applied using a variety of methods, such as roll coating, spray coating, or electrocoating. Once the coating has been applied, it is cured using heat or UV light to ensure that it adheres properly to the metal surface. PVDF Coated Aluminium Coil is commonly used in a range of applications, including in the construction industry for building facades, roofing systems, and siding. It is also used in the automotive and transportation industries, as well as in the manufacturing of appliances and other consumer products. PVDF coated aluminium coils are known for their excellent performance characteristics, including high resistance to fading, chalking, and peeling, as well as excellent adhesion to the metal surface. They are also resistant to a wide range of chemicals, making them suitable for use in industrial and commercial environments.
Aluminium Coil for Roofings PVDF Coated Aluminium Coil PVDF (polyvinylidene fluoride) coated aluminum coil is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum coil is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum coil is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity. Key Features of PVDF Coated Aluminum Durability: PVDF coated aluminum is resistant to weathering, UV radiation, and corrosion, making it suitable for use in a variety of outdoor applications.
Aluminium Coil for Roofings PVDF (polyvinylidene fluoride) coated aluminum coil is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum coil is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum coil is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity.
PVDF Coated Aluminium PVDF (polyvinylidene fluoride) coated aluminum is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity.
1)Alloy type 1100 or 3003 2) thickness Alloy: we can offer 0.25mm to 1.5mm 3) Coating material: PVDF or PE 4) Width: we can offer 600mm to 1550mm 5) Color: we can offer various colors 6) Quantity: min order is 5T for each size and color
One of the largest integrated primary producer of aluminium in Asia. With a pan-Indian presence that encompasses the entire gamut of operations, from bauxite mining, alumina refining, aluminium smelting to downstream rolling, extrusions and recycling, Hindalco enjoys a leadership position in aluminium and downstream value-added products in India. Our Indian aluminium operations are integrated and consist of bauxite mining, alumina refining, smelting and converting primary metal into value-added products. We have dedicated sources for critical raw materials such as bauxite, power and coal. We also have committed supply sources for auxiliary chemicals. Our finished products include alumina, primary aluminium in the form of ingots, billets and wire rods, value-added products such as rolled products, extrusions and foils. Metallurgical alumina is used for our own captive needs. Chemical alumina and hydrates are used in range of industries including water treatment, fillers in cables and plastics, refractories and ceramics, glass among others. Our facilities are in regions close to raw material sources, low cost and available labour and demand markets. This helps in reducing costs and improving profit margins. The technology upgrade has resulted in higher utilisation rates at our plants and improved efficiency. We believe implementation of superior technology not only reduces costs but also provides superior and customised products, thus, improving our sales. Hindalcoâ??s integrated complex at Renukoot, in Uttar Pradesh, India, houses an alumina refinery, an aluminium smelter and facilities for the production of semi-fabricated products. Power is sourced from our Renusagar power plant, located about 45km from Renukoot. Our facilities also include an aluminium smelter and an aluminium FRP facility (for rolled products, extrusions products and wire rods) at Hirakud (Odisha) with a captive power plant and coal mine, and alumina refinery at Muri (Jharkhand). Our Chemical grade alumina plant is located at Belagavi (Karnataka), and rolling mills at Belur (West Bengal), Taloja near Mumbai and Mouda near Nagpur (Maharashtra). Foil rolling facility is situated at Mouda near Nagpur (Maharashtra) and our extrusion plant at Alupuram (Kerala). Hindalco's new age smelters at Aditya (Odisha) and Mahan (Madhya Pradesh), operating on state-of-the-art AP36 technology, have not only resulted in expansion of our capacities but also improved cost-efficiency of our operations. These smelters have their own captive power plants and source alumina from Utkal, our 100% subsidiary. Utkal Alumina (Odisha) is a world class refinery with one of the lowest cost structure in the world. The bauxite for Utkal is sourced from Baphlimali mines by a 18 kilometer long conveyor, one of its kind in the world.
PVDF coating aluminum coil for ACP Various color available PVDF two layers coating thickness: 26 microns Thickness: 0.2mm to 0.8mm width: 1240mm,1260mm, 1510mm, 1520mm etcs
PVDF coating aluminum coil for ACP Various color available PVDF two layers coating thickness: 26 microns Thickness: 0.2mm to 0.8mm width: 1240mm,1260mm, 1510mm, 1520mm etcs
WOODEN VEIN COATED ALUMINUM COIL PE COATING OR PVDF COATING BOTH AVAILABEL 1. Thickness: 0.15-1mm 2. Width: 100mm-1350mm 3. PVDF thickness: >25um 4. Color standard: E2HB 6. Coating Adhesive: Not lower than first grade impact: no crack (50kg/cm, ASTMD-2794:1993) 7. Buketon: >100 times 8: Boiling point: no distortion and color change
