Function characteristics of white fused alumina sand: It will not affect the color of the workpiece; It can be used for sand blasting in the process of prohibiting iron powder residue; micro powder grade is very suitable for wet sand blasting and polishing; high processing speed and good quality; the content of iron oxide is very low, which is suitable for sand blasting operation in which iron slag is strictly prohibited; Remove impurities by pickling. White corundum abrasive treatment Many advantages of white fused alumina abrasive contribute to its important application in industry, but the waste of white corundum abrasive used in workpiece processing has become the main problem faced by enterprises. When white fused alumina abrasive is used, abrasive precipitation will occur. Of course, there will be other sundries on the workpiece. If the two are combined, the difficulty of cleaning will be further increased.
Brown fused alumina melt film precision casting sand is based on the production of the brown fused alumina and with special technology, it is produced by the careful organization of the researchers. The quality has reached the advanced level of similar foreign products through laboratory tests and production in practice of dozens of casting enterprises. And some performances of it can be adjusted or showcased according to the customers requirement. The precision casting sand with high refractoriness, low thermal expansion coefficient, good thermal stability, strong air permeability, high intensity, easy to shell, high casting finish.It can substitute Zirconia sand (powder) its price is only half of zirconia sand (powder), and the recovery ratio is high as well. It can be mainly applied to the melt films and silicasol technology of jewelry, handicrafts, stainless steel products, watches, glasses, aluminum die casting industries, and can be processed in line with the demands of the clients.
Tabular Alumina: The plate-like crystal structure has small pores and many closed pores, and the porosity is roughly the same as that of fused corundum. It has high purity, good volume stability and minimal reheating shrinkage. The refractory or castable used for production has good thermal shock stability and bending strength after high-temperature treatment, but the price is higher than that of other alumina. High fire resistance; High corrosion resistance; High erosion resistance; High thermal shock stability; High strength and good toughness; Stable chemical properties. Tabular corundum is a kind of pure sintered corundum with complete shrinkage without adding any additives such as It has the characteristics of coarse crystal and good development crystal structure. The plate-like crystal structure has small pores and many closed pores, and the porosity is roughly the same as that of fused corundum. It has high purity, good volume stability and minimal reheating shrinkage.
Fused mullite is made of high-purity quartz sand and industrial alumina, melted in super large electric arc furnace, and can be processed into particles, fine powders and micro powders with different sizes. It has white color, low carbon residue and well-developed acicular crystals. With the characteristics of low porosity, low impurity content, and good thermal shock resistance and wear resistance. It is widely used in glass kiln lining brick, alkali free glass sedimentation tank, hot blast stove brick of large smelting blast furnace, low creep sillimanite brick of blast furnace, ceramic kiln furniture, box antimony, shed plate, petrochemical industry and other industries.
Fused Calcium Aluminate is fused in the electric arc furnace with the high quality raw materials. It is an indispensable refining agent in the process of refined steel making in steel industry. It is characterized by very strong desulfurization and deoxygenation, low melting point,high melting speed, it can shorten smelting time, reduce the energy consumption,reduce dust pollution in the steel plant, and good safety performance,good arc burying effect, reduce the erosion of lining by the arc, increase the service life of the ladle. This product does not absorb the water, does not powder, and easy to store and transport. For more informaion
Tabular Alumina: The plate-like crystal structure has small pores and many closed pores, and the porosity is roughly the same as that of fused corundum. It has high purity, good volume stability and minimal reheating shrinkage. The refractory or castable used for production has good thermal shock stability and bending strength after high-temperature treatment, but the price is higher than that of other alumina. High fire resistance; High corrosion resistance; High erosion resistance; High thermal shock stability; High strength and good toughness; Stable chemical properties. Tabular corundum is a kind of pure sintered corundum with complete shrinkage without adding any additives such as It has the characteristics of coarse crystal and good development crystal structure. The plate-like crystal structure has small pores and many closed pores, and the porosity is roughly the same as that of fused corundum. It has high purity, good volume stability and minimal reheating shrinkage.
Brown fused alumina melt film precision casting sand is based on the production of the brown fused alumina and with special technology, it is produced by the careful organization of the researchers. The quality has reached the advanced level of similar foreign products through laboratory tests and production in practice of dozens of casting enterprises. And some performances of it can be adjusted or showcased according to the customers requirement. The precision casting sand with high refractoriness, low thermal expansion coefficient, good thermal stability, strong air permeability, high intensity, easy to shell, high casting finish.It can substitute Zirconia sand (powder) its price is only half of zirconia sand (powder), and the recovery ratio is high as well. It can be mainly applied to the melt films and silicasol technology of jewelry, handicrafts, stainless steel products, watches, glasses, aluminum die casting industries, and can be processed in line with the demands of the clients.
Function characteristics of white fused alumina sand: It will not affect the color of the workpiece; It can be used for sand blasting in the process of prohibiting iron powder residue; micro powder grade is very suitable for wet sand blasting and polishing; high processing speed and good quality; the content of iron oxide is very low, which is suitable for sand blasting operation in which iron slag is strictly prohibited; Remove impurities by pickling. White corundum abrasive treatment Many advantages of white fused alumina abrasive contribute to its important application in industry, but the waste of white corundum abrasive used in workpiece processing has become the main problem faced by enterprises. When white fused alumina abrasive is used, abrasive precipitation will occur. Of course, there will be other sundries on the workpiece. If the two are combined, the difficulty of cleaning will be further increased.
Brown fused alumina melt film precision casting sand is based on the production of the brown fused alumina and with special technology, it is produced by the careful organization of the researchers. The quality has reached the advanced level of similar foreign products through laboratory tests and production in practice of dozens of casting enterprises. And some performances of it can be adjusted or showcased according to the customers requirement. The precision casting sand with high refractoriness, low thermal expansion coefficient, good thermal stability, strong air permeability, high intensity, easy to shell, high casting finish.It can substitute Zirconia sand (powder) its price is only half of zirconia sand (powder), and the recovery ratio is high as well. It can be mainly applied to the melt films and silicasol technology of jewelry, handicrafts, stainless steel products, watches, glasses, aluminum die casting industries, and can be processed in line with the demands of the clients.
Function characteristics of white fused alumina sand: It will not affect the color of the workpiece; It can be used for sand blasting in the process of prohibiting iron powder residue; micro powder grade is very suitable for wet sand blasting and polishing; high processing speed and good quality; the content of iron oxide is very low, which is suitable for sand blasting operation in which iron slag is strictly prohibited; Remove impurities by pickling. White corundum abrasive treatment Many advantages of white fused alumina abrasive contribute to its important application in industry, but the waste of white corundum abrasive used in workpiece processing has become the main problem faced by enterprises. When white fused alumina abrasive is used, abrasive precipitation will occur. Of course, there will be other sundries on the workpiece. If the two are combined, the difficulty of cleaning will be further increased.
Introduction of Tabular Alumina: The plate-like crystal structure has small pores and many closed pores, and the porosity is roughly the same as that of fused corundum. It has high purity, good volume stability and minimal reheating shrinkage. The refractory or castable used for production has good thermal shock stability and bending strength after high-temperature treatment, but the price is higher than that of other alumina. High fire resistance; High corrosion resistance; High erosion resistance; High thermal shock stability; High strength and good toughness; Stable chemical properties. Tabular corundum is a kind of pure sintered corundum with complete shrinkage without adding any additives such as MgO and B2O3. It has the characteristics of coarse crystal and good development �±- Al2O3 crystal structure. The plate-like crystal structure has small pores and many closed pores, and the porosity is roughly the same as that of fused corundum. It has high purity, good volume stability and minimal reheating shrinkage. The refractory or castable used for production has good thermal shock stability and bending strength after high-temperature treatment Application scope of Tabular Alumina: Tabular corundum can be used as the main component in aluminum carbon, aluminum magnesium carbon, magnesium aluminum carbon, magnesium spinel and aluminum chromium refractory bricks, and can also be introduced into high aluminum amorphous refractories as enriched alumina. It can be widely used in iron and steel, casting, ceramics and other industries. Its application in iron and steel industry almost covers the whole process of ironmaking and steelmaking.
Fused Calcium Aluminate is fused in the electric arc furnace with the high quality raw materials. It is an indispensable refining agent in the process of refined steel making in steel industry. It is characterized by very strong desulfurization and deoxygenation, low melting point,high melting speed, it can shorten smelting time, reduce the energy consumption,reduce dust pollution in the steel plant, and good safety performance,good arc burying effect, reduce the erosion of lining by the arc, increase the service life of the ladle. This product does not absorb the water, does not powder, and easy to store and transport. For more informaion
Brown fused alumina melt film precision casting sand is based on the production of the brown fused alumina and with special technology, it is produced by the careful organization of the researchers. The quality has reached the advanced level of similar foreign products through laboratory tests and production in practice of dozens of casting enterprises. And some performances of it can be adjusted or showcased according to the customers requirement. The precision casting sand with high refractoriness, low thermal expansion coefficient, good thermal stability, strong air permeability, high intensity, easy to shell, high casting finish.It can substitute Zirconia sand (powder) its price is only half of zirconia sand (powder), and the recovery ratio is high as well. It can be mainly applied to the melt films and silicasol technology of jewelry, handicrafts, stainless steel products, watches, glasses, aluminum die casting industries, and can be processed in line with the demands of the clients.
Fused mullite is made of high-purity quartz sand and industrial alumina, melted in super large electric arc furnace, and can be processed into particles, fine powders and micro powders with different sizes. It has white color, low carbon residue and well-developed acicular crystals. With the characteristics of low porosity, low impurity content, and good thermal shock resistance and wear resistance. It is widely used in glass kiln lining brick, alkali free glass sedimentation tank, hot blast stove brick of large smelting blast furnace, low creep sillimanite brick of blast furnace, ceramic kiln furniture, box antimony, shed plate, petrochemical industry and other industries.
Tabular Alumina, with the purity, do not add any additives, and firing contraction completely finished sintered alumina, alumina powder as raw material, after fine grinding, molding, drying, for ultra high temperature furnace with the temperature below the melting point of corundum, quick heat cooling fast under the condition of burning, to form a number of closely with columnar crystal, with high purity,high melting point, grains high hardness, heat load of high strength, low shrinkage, high density and low permeability, good wear resistance, good thermal shock stability etc. Tabular Alumina Usage Specification Chemical composition Bulk Density gcm3 Apparent Porosity Al2O3 Na2O Fe2O3 SiO2 Refractory Size 0 1mm 1-3mm 3-5mm 5-8mm 99.0 0.35 0.2 0.2 3.5 5.0 Fine 200 0 325 0 98.5
Brown fused alumina melt film precision casting sand is based on the production of the brown fused alumina and with special technology, it is produced by the careful organization of the researchers. The quality has reached the advanced level of similar foreign products through laboratory tests and production in practice of dozens of casting enterprises. And some performances of it can be adjusted or showcased according to the customers�¢?? requirement. The precision casting sand with high refractoriness, low thermal expansion coefficient, good thermal stability, strong air permeability, high intensity, easy to shell, high casting finish.It can substitute Zirconia sand (powder) its price is only half of zirconia sand (powder), and the recovery ratio is high as well. It can be mainly applied to the melt films and silicasol technology of jewelry, handicrafts, stainless steel products, watches, glasses, aluminum die casting industries, and can be processed in line with the demands of the clients.
Alumina based Sintered Mullite is made of high-quality alumina powder by special process and sintered at high temperature. The product has the characteristics of high fire resistance, good resistance to chemical corrosion and good thermal vibration stability, which is widely used in iron and steel smelting, ceramics, building materials, chemical industry, nonferrous smelting and other industries.
FUSED MULLITE Fused mullite is made of high-purity quartz sand and industrial alumina, melted in super large electric arc furnace, and can be processed into particles, fine powders and micro powders with different sizes. It has white color, low carbon residue and well-developed acicular crystals. With the characteristics of low porosity, low impurity content, and good thermal shock resistance and wear resistance. It is widely used in glass kiln lining brick, alkali free glass sedimentation tank, hot blast stove brick of large smelting blast furnace, low creep sillimanite brick of blast furnace, ceramic kiln furniture, box antimony, shed plate, petrochemical industry and other industries.
Fused Calcium Aluminate is fused in the electric arc furnace with the high quality raw materials. It is an indispensable refining agent in the process of refined steel making in steel industry. It is characterized by very strong desulfurization and deoxygenation, low melting point,high melting speed, it can shorten smelting time, reduce the energy consumption,reduce dust pollution in the steel plant, and good safety performance,good arc burying effect, reduce the erosion of lining by the arc, increase the service life of the ladle. This product does not absorb the water, does not powder, and easy to store and transport.
White fused alumina for sandblasting abrasive utilized by unique advanced technology. It is characterized by short grinding time, high efficiency and so on. In particular, its advantages such as high hardness, good chemical stability and unique self-sharpening , it becomes the first choice for the sandblasting technics, meanwhile, it is also the ideal material for sandblasting and derusting, workpiece cleaning, and polishing.
