Non woven nylon abrasive grinding wheel
1. Made up of high temper nylon 66 staple, good quality abrasive and special gule.
2. Easy to be used for multi layers net structure
3. No ratation direction limit.
Specification (diameter * thickness/inch): 6*1 /8*1 /2*2 /3*2 /4*2 /5*2 /6*2 /7*2 /8*2 /9*2 /10*2 /12*2 /14*2 /16*2 /18*2 /20*2(inch)
Grit : 46#---3000#
Hardness: 2p---28p, or according customers requirment
Colour: grey/red/green/white/maroon/brown/dark brown
Bore: all sizes hole:cycle/square/hexagon/cross, etc.Can also add different kinds of tubes.
Max rotation speed: 3000r/min
Main application:
All kinds of metals, wooden wares,Plastic wares,Marble
Zirconia Fused Alumina grains based on ISO standard, FEPA standard, P standard for coated abrasives & JIS standard. Grits availabe are as following:
FEPA standard: F12~F120
ISO standard: F12~F120
P standard: P12~P120
JIS standard: #12~#120.
A.40 x 25kg plastic woven bags in one big bag.
B. In 1000kg big bag.
C. In 25kg plastic woven bags.
D. 40 x 25kg plastic woven bags on pallet.
E. 40 x 25kg paper bags on pallet.
1 Application: For both cutting and surface edge grinding for various materials, such as steel, stone, stainless steel, metal, etc
2 Characteristics: cutting and grinding,high efficiency
3 Any specification you need, we can design and produce. Any size you need, we can make it for you.
4 Top quality and safety controlled by special and professional equipment
5 Package:as our standard or packaged as customer's requirement.
Dimension: 100 X 16mm, 115 X 22mm,
125 X 22mm, 150 X 22mm, 180 X 22mm,
230X22mm
Grain: CC,AA,ZA
Coating: Close Coated, Semi-open Coated
Base: Fiber paper
Punching Model: round hole, cross hole, asterisk hole.
Simple packing(shrink wrapped)
Or according to customer's requirements.
Take triangel velcro disc for example:
Dimension: 80 x 80 x 80mm, 82 x 82 x 82mm,
90x90x90mm, 93x93x93mm, 94x94x94mm,
95 x 95 x 95mm, 105 x 105 x 105mm, 120 x 120 x
120mm or according to customer¡¯s requirement
Grain: cc, aa, wa
Coating: close coated, semi-open coated, stearate coated
Base:paper(c-wt, d-wt, e-wt, f-wt), cloth(j-wt, x-wt, y-wt)
Punching model:no hole, with holes or according to customer's requirement.
Simple packing(shrink wrapped)
Or according to customer's requirements.
White fused aluminum oxide was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Super thin cutting wheel 4''*3/64''*5/8''(105*1.2*16mm)
1.flat type,2nets,medium hardness
2.made of brown fused alumina,suitable for grinding medium and high tensile strength metal.
3.high tensile and brittle
4.used safely and long life
5.with ISO certificate.
1.1000pcs/carton
2.according to the customers' request.
1.T27-A24R8BF 180*6*22.23mm
2.High strength and medium hardness
3.Fast working speed ---80m/s
4.Durable working life and excellent grinding performance
5.With ISO certificate
Useage of the grinding wheel:
mainly used for grinding the metal' s welds, burrs and rough edges in the automobile,ship-building,chemical and metallurgical industries
1.80pcs/carton
2. according to the customers' requirement.
STEEL GRIT CAPABILITY INTRODUCTION:
Raw material is non casting bearing steel, it is crushed after quenching, then it is tempered. Product features with wear resistance and high impact toughness. According to different application, steel grit is devided into below 3 types:
Type A: Hardness>60HRC
This type is specially developed for granite cutting with stable performance, uniform grain size and high wear resistant. It has been approved by our customers that angular steel grit are sharper, faster cutting speed than arc steel grit and sawing surface finished is flatter and smoother.
Type B: Hardness>53-60HRC
It is angular shape in the originals and is gradually ground round, especially applicable to removing the oxygenated surface, cleaning of metal parts and shot peening
Type C: Hardness> 40-50HRC
The hardness is lower than type B, In the process of the abrasives blasting. Its edges are removed slowly, especially applicable to removing the oxygenated surface, cleaning of metal parts and pre-treatment.
Steel shot capability introduction:
High-grade alloy steel shot with high density and less deficiency, the range of the grain size narrow. Special heat-treatment provides fine microstructure and optimum mechanical characteristics, which gives products the appropriate resilience and good fatigue resistance, and high cycling application rate and less consumption, this can increase the productivity and the profitability of your equipment.
The steel shot can be applicable widely, like shot blasting for preparation of surfaces before coating for steel structures, reinforcement using pre-stressing or shot peening for mechanical components.
Type:T27(flat)
Layers: 4-14
Washer: 1 or 2 or as requirement
Inner diameter: 16mm,23mm(Tolerance:0.1mm)
Outer diameter: 75mm,85mm,90mm,95mm,107mm,117mm,140mm,170mm, 180mm
Back: one black paper, or one layer non-woven cloth, or customers' own label
Applications: Used as the backing pads of Flap Disc,Mop Disc and Flap Wheel.
The excircle of backing disc id dealed with polishing without burr,The discrepanly of external diameter is less than 1mm,Can be customer-made diameter,thickness and layers.
The angle of backing pads can be made in 8¡ãand 9¡ãalso twin plate.
The backing plate surface can be made-in no-woven cloth and black paper.
With many years of product experience,high quality and low price.we have win lots of foreign customer's confidence.
50 pcs in one plastic bag, 20 bags in one carton box, pallet.
Type:T27(flat)
Layers: 4-14
Washer: 1 or 2 or as requirement
Inner diameter: 16mm,23mm(Tolerance:0.1mm)
Outer diameter: 75mm,85mm,90mm,95mm,107mm,117mm,140mm,170mm, 180mm
Back: one black paper, or one layer non-woven cloth, or customers' own label
Applications: Used as the backing pads of Flap Disc,Mop Disc and Flap Wheel.
The excircle of backing disc id dealed with polishing without burr,The discrepanly of external diameter is less than 1mm,Can be customer-made diameter,thickness and layers.
The angle of backing pads can be made in 8¡ãand 9¡ãalso twin plate.
The backing plate surface can be made-in no-woven cloth and black paper.
As the biggest factories in China , we manufacture more than 150,000 pieces of fiber glass backing pads per day which are mainly used for flap disc manufactures. With advanced technology and excenlent quality, products made in our factory are sold well not only in Asia , but also in more than 20 countries and areas of the world.
50 pcs in 1 plastic bags and then put in to box according to their size. Carton,Pallet
