Steel shot capability introduction:
High-grade alloy steel shot with high density and less deficiency, the range of the grain size narrow. Special heat-treatment provides fine microstructure and optimum mechanical characteristics, which gives products the appropriate resilience and good fatigue resistance, and high cycling application rate and less consumption, this can increase the productivity and the profitability of your equipment.
The steel shot can be applicable widely, like shot blasting for preparation of surfaces before coating for steel structures, reinforcement using pre-stressing or shot peening for mechanical components.
25kgs/bag.
Our steel shot is exceptionally durable ¡§c due to its low friability, the impact of blasting actually further tempers the shot so that its hardness increases over time, allowing the media to deliver consistent, repeatable performance over thousands of cycles. As produced, our steel shot has a hardness of 40-50hrc (390-510 h.V). And thanks to its extremely low breakdown rate, virtually no dust is produced. Delivering high-impact energy and fast cleaning rates, steel shot is used to for heavy scouring and to produce very bright finishes Steel shot size: s70, s110, s170, s230, s280, s330, s390, s460, s550, s660, s780, s930 Steel shot diameter: 0.2mm, 0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.4mm, 1.7mm, 2.0mm, 2.5mm, 3.0mm Steel shot used for shot blasting , shot peening
YuMIng Abrasive Technology Co., Ltd is a well-known supplier and manufacturer of abrasive products. The company is formally located in ShanDong, China, not only limited to the sale of steel balls, but also the supply of steel balls, steel sand, shot blasting machine and other products. The starting prices for these steel balls start at $100 per ton, with a moq of 1 ton. The preferred place of shipment is QingDao, production capacity up to 300 tons, delivery time about 10-15 working days. Customers can pay by bank wire transfers (T/T), MoneyGram, credit card (CC), PayPal, etc. We want to provide the best solutions to our customers around the world and not just sell products.
Steel Shot is made of Chrome Alloy material which are fast atomized after melting.After heat treatment,it is featured with optimum mechanical characteristics,good tenacity,fatigue resisance,long woring-life,low consumption and so on.These made consumption save more than other suppliers' steel shot.
1. Production specification: s930, s780, s660, s550, s460, s390, s330, s280, s230, s170, s110, s70 2. Chemical composition of the products: c 0.70-1.20% mn 0.60-1.20%, si 0.40-1.20%, s¡ü0.05%, p ¡ü0.05% 3. Hardness: normal: 40-50hrc special: 52-56hrc, 56-60hrc density: 7.4g/cucm 4. Steel shot is used for industrial foundry, forging plant, heat treatment shop, steel construction plant, container manufacturer, ship builder, auto and locomotive manufacturer . 5. Microstructure: tempered marten site high strength, durable ervin life: cast steel shot: 2000 cycles Pallet with 40 bags of 25 kgs
Steel shot production standards: We strictly according to GB "GB/T18838.3-2008 high carbon steel shot and sand", American steel casting association "SFSA20-66 cast steel abrasive standard", American motorcar engineer association "SAE standards," J827 cast steel shot in Chinese. Black people republic of metallurgical industry "YB/T5149-93 cast steel shot", the U.S. army standard "MIL - S - 851 cleaning and strengthen with metal kind steel grit and steel shot standards" and "international organization for standardization ISO11124-3 standard high carbon steel shot cast. Steel shot plastic woven sack packaging, packaging bags which steel shot, steel shot wood pallet packaging, paper bag steel shot packaging, bucket type steel bolus packaging.
Steel shot - S110-S930 - Hardness: 40-50 HRC; 50-60 HRC - Grade: Normal grade and special grade - 1000mts/month - 25kg/bag - Purpose: shot blasting, abrasive medias to remove dust from steel surface - Top quality and reasonable rates - Immediately delivery available - Customized production available 25kgs/bag,40bags/sack/pallet
Steel shot Steel grit Chilled iron grit Stainless steel cut wire shot
High-grade alloy steel shot with high density and less deficiency, the range of the grain size narrow. Special heat-treatment provides fine microstructure and optimum mechanical characteristics, which gives products the appropriate resilience and good fatigue resistance, and high cycling application rate and less consumption, this can increase the productivity and the profitability of your equipment. The steel shot can be applicable widely, like shot blasting for preparation of surfaces before coating for steel structures, reinforcement using pre-stressing or shot peening for mechanical components. S110, S170, S230, S280, S330, S380, S460, S550, S660, S780, S930
Chemical composition (c)0.70-1.20% (mn)0.35-1.20% Si)0.40-1.20% (s)less than0.05% (p)less than0.05% Hardness Normal 40-50hrc Special 52-60hrc Durality 2000-2800 times Microstructure tempered martensite or sobite Density 7.4g/cm3 Bulk density 4.4g/cm3 Application Blast cleaning of cast steel shot:used for blast cleaning of casting, die-casting, forging, sand removal of casting, steel plate, h type steel, steel structure. Rust removal of cast steel shot:rust removal of casting, forging, steel plate, h type steel, steel structure, descaling of forging. Shot peening of cast steel shot:shot peening of gear, heat treatment. Shot blasting of cast steel shot:shot blasting of profile steel, ship board, steel board, steel material. Shot blasting of cast steel shot:shot blasting of steel board, profile steel, steel structure. Pre-treatment of cast steel shot:pre-treatment of surface, steel board, profile steel, steel structure, before-painting. Application devices Steel shot mainly used for the following equipment including rotary barrel shot blasting machine, chain type shot blasting machine, pedrail type shot blasting machine, pass_through shot blasting machine, table type shot blasting machine, pendent-chain & pile-type shot blasting machine, trolley type shot blasting machine, abrator, abrator equipment, shot peening machine, shot peening equipment, sandblasting machine, sandblasting equipments, steel material pretreatment production line, steel plate pretreatment production line, steel structure pretreatment production line. 25kgs/bag, 40 bags/pallect
