Sponge iron, ms sucup mill scale.Traders export
The rapid expansion of high-power EAFs (Electric Arc Furnace) has increased the interest to use DRI as a great option for the continuous charging of electric furnaces in developed countries. Sponge iron is a valuable source of iron for the production of high-quality steel. With the Direct Reduction technology that has been developed considerably in recent years, sponge iron melting in electric arc furnaces has more qualitative advantages than scrap metal smelting for steel making. Some of the benefits include: More specific chemical composition Low levels of impurities (gangue, sulfur, and phosphate) The impossibility of using cheap scrap Easy storage and shipment Continuous automatic charging Predictable price structure Fixed power of input electricity Relying on the knowledge, valuable experience and history, and empowerment of our team, we, Arij Global Trading Co. are supplying our high-quality gas-based DRI to the far destinations in containerized and bulk shipment. As a supplier of gas-based Sponge Iron with a great history and experience, we also provide cost-effective solutions for the shipment to our customers in complete accordance with their needs, which ultimately fulfills the goal of providing satisfying service.
Because of the bright future of the universal requirement for DRI briquette over the next two decades, a new method was created in 2009 in Iran to produce a cold briquette of CDRI (Patent No. IR60923). Cold-Briquetted Sponge Iron (CBSI) was the name given to the new product. Afterward, following pilot-scale and performing various laboratory studies, Cold-Briquetted Iron and Carbon (CBIC) was invented in Iran as a premium product over CBSI because of the prior�¢??s higher carbon content sand higher efficiency through processes of steelmaking (Patent No. IR84090). Owing to the fact that the cold-briquetting process of DRI is being done under high pressures, the density and mechanical strength of CBIC should be higher and the surface area and also porosity should be less than DRI�¢??s. thus, the oxidation rate, dust and fine generation rate, and the moisture adsorption capacity of DRI will considerably decrease through the process of cold briquetting. These improvements would have big technical, economic and environmental effects on direct reduction and industries steel manufacturing and will push them heading for more sustainability
Sponge iron is used in the iron and steel industry as a substitute for scrap in induction and electrical arc furnaces. Over the years, the shortage of expensive melting scrap has made sponge iron a significant raw material for manufacturing high quality steel. For Price , specification and other details please contact us
Quantity Available - 1500 MT Please contact for price and other details
Coal based Sponge-iron is a metallic product produced through direct reduction of iron ore in the solid state. As such it is also known as Direct Reduced Iron (DRI).After reduction of iron ore pellet the product resembles sponge because of pores left behind after removal of oxygen. As such it is called Sponge Iron
Price And Quantity Minimum Order Quantity : 100 Kilograms Price Range : 70.00 - 150.00 INR/Metric Ton Product Specifications Product Type : Ferroalloy Product Description Industrial Sponge Iron Lumps are used as substitute for steel scrap in the making of steel. They are used by various factories as they act as better-quality feedstock for the electric furnaces. We can provide these lumps in different grades as per the demands of the clients. Trade Information Payment Terms : Cash Advance (CA) Supply Ability : 400-500 Kilograms Per Month Delivery Time : 10 Days Main Domestic Market : All India
FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE (SPONGE IRON LUMPS) SPECIFICATION: FE TOTAL: : 90% Min FE METAL: : 78% Min METALLIZATION: : 85% Min FeO: : 14% Max SULPHUR: : 0.035% Max PHOSPOROUS: : 0.05% Max CARBON: : 0.12% Max PHYSICAL SIZE: : 3 - 20 mm (100% Lumps). Mean Particle Size (MPS) : 10-12mm NON-MAGG: :1% Max Fines: :1% Max (less than 3mm will be considered as fines)
We are selling titanium sponge, located in Rotterdam. We have 90 tons at the moment Ti: 98% min O: 0.10% max, N: 0.10% max C: 0.10% max CI: 0.15% max Si: 0.04% max F: 1.9% max Mg: 0.001% max Ni: 0.010% max Size: 5-30mm
Sponge Iron
We offer superior quality sponge iron that is also known as direct- reduced iron. Our offered sponge iron is made for high grade, 65-70 fe. Quantity : 1000-1500 mt per months. 1000-1500 mt per months.
Chemical composition: Tfe(%)Fe(%)C(%)S(%)P(%)Size(mm) &88&85&1.4&0.05&0.056-18 1.8mt/bag
Min fem-80%, fet-90-92%, s-0.04% max. Loose in form of lumps.
Sponge iron Etalisation in degree : 86% 1%, iron : 80% 1%, carbon (0.10 - 0.20)% sulphur: 0.030%max, phosphours: 0.040% max, sio2 : 5% ax, size : 5 - 18 mm.
1. DRI/Sponge Iron 2. Ferro Silicon
Sponge iron filter material adopt high grade ore, using the REDOX reaction principle, through a filter in addition to the lake way out, pipe, boiler and circulating water dissolved oxygen corrosion after water treatment water dissolved oxygen content can be below 0.05 mg/L.In rotary kiln, shaft furnace or other reactor, coal, coke, gas or hydrogen gas, iron ore and pellets of iron concentrate in below material melt temperature under the condition of low temperature reduction, become the product of cellular.The reduction of iron in small iron core, such as sea jin, therefore calls.Sponge iron
Direct reduced iron (DRI), also called sponge iron, is produced from the direct reduction of iron ore (in the form of lumps, pellets, or fines) to iron by a reducing gas.
A. Specification Product Quality Stainless Steel Wool fill fabric for home Material Stainless steel and poly fiber Weight Ranging from 2000gsm Size 4"*10m per roll or as requested Width 47"/48" Package Roll or Sheet B. Feature: 1. 100% non-toxic and environmentally safe 2. Easy to install due to its flexible, compressible nature, comes in rolls and can be cut to size or shape desired, stuff it in the hole, and you are done. 3. It is a permanent solution, will not rust or corrode over time, dose not shrink, stain, pull out. 4. Made of sharp durable fibers material which is suitable to die cut to specific shapes and sizes. 5.Most consistent material for exhaust applications with strength in all directions as cross-lapped material going at approximately 90 degree angles to other fibers. 6. Installs under landscaping and allows grass and small plants to grow through, thus being an invisible force against pests. C. Function 1. Fill fabric is an exclusion fabric used by professional nuisance control and pest control operators. 2. It is composed of stainless steel and poly fibers. This blend of materials gives it an extra â??spring backâ?�, allowing for easier fitting in crevices and the ability to stay in place well. Cut it 2-3 times the size of the opening to make a tight fit. 3. It is highly resilient and is an impenetrable barrier against rodents and pests. D. Application Burrowing animals such as rats, chipmunks, gophers, groundhogs and nutria can dig beneath the ground and ruin landscaping, chew through cables and destroy dikes and levees. Prevent these animals from wreaking havoc beneath the ground, currently protecting many public and private sites. E. Install Instructions 1. Install it by pressing it into rodent-prone crevices with gloved hands or simple tools like a putty knife or screwdriver. 2. Do not install it close to live electrical conductors, since stainless stell is an electrical conductor. Installing IT around fully sealed electrical conduit coming out of a wall is safe.
Sponge Iron(DRI)/Hot Briquetted Iron/Ferroalloys
MD: min 90% C: 2.2
