Titanium fin tube,copper fin tube,titanium tube,coppre tube,stainless fin tube,stainless tube.
Standards ASTM / ASME B265 / SB265 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Finish Hot rolled (HR), Cold rolled (CR) Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Foil Thickness: 0.05-0.5 mm; Width:300-500 mm, Sheet Thickness: 0.6-30 mm; width:1500-2000 mm. Grade 1, 2, 4, 5, and 7. Submit LOI / RFQ along with KYC/CIS. one full service of the shipments, we are available provide FOB, CIF, DDU and DAP.
1. Manufacturing Technique Titanium sintered porous material is a kind of porous material with high quality spherical and high purity titanium powder as raw material and it is made rigid by forming and sintering at high temperature. 2. Properties of titanium sintered porous materials: Pore diameter uniformity, pore stability, high separation efficiency. High porosity, low filtration resistance, and high permeability. Good chemical stability, acid, and alkali corrosion resistance, oxidation resistance. Morphological stability, no particle shedding, comply with food hygiene and pharmaceutical GMP requirements. Good mechanical properties, low differential pressure, large flow. Strong anti-microbial ability, does not interact with microorganisms. Online regeneration, easy cleaning, long service life. Excellent biocompatibility can be widely used in biological, food, pharmaceutical, medical industry. Excellent electromagnetic shielding performance. Good damping and shock resistance. 3. Application of titanium sintered porous materials Titanium sintered porous materials are mostly used for filtering materials, electrodes, heat transfer materials, catalyst carrier materials, noise-canceling materials according to their physical and structural properties. Decarburization filtration of pharmaceutical liquids. Electrolytic gas industry precision filtration, gas distribution. The medical industry makes biological implants. Water treatment industry odor sterilization filtration and ozone aeration. Clarification and filtration in food and beverage processing. Prefiltration of reverse osmosis system for the electronics industry. Terminal filtration of petroleum products in the petrochemical industry and filtration of carbonic alkali liquid in the chemical industry. High-pressure air filtration in the aerospace industry. Filtration and recovery of the precious metal catalysts in the fine chemical industry. The electrode matrix of a fuel cell. Catalyst carrier in gas and liquid catalytic reactions. 4.Precautions for the use of titanium sintered porous materials: During installation, disassembly and clean avoid scratches, collisions and falls on hard objects. When using, the filtrate is filtered from the outside in to avoid the reverse direction. Avoid instant pressurization when the filter element works. When the filtration efficiency is less than 50%, the filter element should be cleaned in time. When cleaning the filter element, the first backflow with pure gas, backflow pressure is 1.5 times the working pressure, each time for 3-5 seconds, and 4-6 times, then backwash with clean liquid for 3-5 minutes, repeat 2-3 times. If the filter element is not good after online back blowing and backwashing, it should be removed and cleaned in time.
High pure Gr1 Gr2 Gr3 Gr5 Gr9 Gr12 titanium plate/sheet 1. Titanium is a kind of rare nonferrous metal. Its density is 4.5g/cm3, it is just 60% of steel. So,it is very lighter than most other metals. We can use it to make high strength, good rigidity and light quality products. 2. It is also well-known as its high strength. It is able to work in the heat of 450-500 continuously. 3. Excellent corrosion resistance:it can work in the wet air,sea water,strong acid and strong alkali. 4. Non magnetic nature:as it is a sort of Non magnetic metal, it cannot be magnetized easily. And its nontoxic nature,a very good compatibility with human tissue and blood. So,it is widely adopted in the field of Medical Science. Titanium plate: 1. Product name: Titanium Sheet 2. Material: GR1, GR2, GR3, GR4, GR5, GR7, GR9, GR12-GR29, Ti11Cr-13v-3Al 3. Standard:ASTM B265,AMS4902,AMS4911,MIL-T-9047G,MIL-T-9046J 4. Specification:T:0.025-80mm W:200-2800mm L:10-4500mm 5. Brand: EnergyTi 6. Origin:Baoji, Shaanxi, China 7. MOQ:10kilogram Quality Control: Our products will be 100% checked and inspected by our QC before packing and shipment. ISO 9001:2018 certificate Quality Inspection: 1. Chemical analysis and Physical Properties test conducted by Bao Ti Group Test center 2. 100% ultrasonic test(UT) 3. Inspect if the surface of the material is contaminated. Features: 1. low density 2. good corrosion resistance property , rustless. 3. non magnetic nature 4. superior quality 5. fast delivery 6. reasonable price Application: Chemical industry, Petrochemical Industry, electrical power industry, military industry, health care industry,Ocean environmental protection, motor vehicle industry, bicycle industry, corrosive environment etc.
Titanium Grade 5 is the aerospace grade and is not cold formableï¼? so it is used more often when no forming is needed. Grade 5 alloy will have ultimate tensile strength at and above 895 Mpa. 2. Plate is often used with the goal to get really close to the final dimensions of the part being made. The material is worked to the closest size of the desired part and the grain structure of the finished piece is more homogenous. Titanium sheet is often used as a heat barrier because titanium stops the heat and does not transfer to the rest of the assembly. Titanium plate and sheet have ballistic properties making it great for driver protection in racing. 3. Applications of product Oil drilling equipments Industrial precision instruments standard parts Medical instruments standard parts Aircraft engine Machineryï¼? electroplating equipment Titanium wind leaf in power used
Titanium Grade 5 is the aerospace grade and is not cold formableï¼? so it is used more often when no forming is needed. Grade 5 alloy will have ultimate tensile strength at and above 895 Mpa. 2. Plate is often used with the goal to get really close to the final dimensions of the part being made. The material is worked to the closest size of the desired part and the grain structure of the finished piece is more homogenous. Titanium sheet is often used as a heat barrier because titanium stops the heat and does not transfer to the rest of the assembly. Titanium plate and sheet have ballistic properties making it great for driver protection in racing. 3. Applications of product , Oil drilling equipments , Industrial precision instruments standard parts , Medical instruments standard parts , Aircraft engine , Machineryï¼? electroplating equipment , Titanium wind leaf in power used
Specification :1.0mm, 2.0mm, 3.2mm, 4.2mm, 5.2mm, 6.2mm Brand :TC4/GR5, TC4ELI/GR5ELI, TA3/GR3 Treatment: nondestructive testing, leveling and finishing to finished plate. Physical properties: the tensile strength of TC4 medical titanium alloy plate is 980-1020mpa, the yield value is 950-1000mpa, the elongation after fracture is 20%, and the high-fold structure is a1-a5. TC4/GR5 titanium alloy composition: Nominal chemical composition (ti-6al-4v) Ti Al (5.5 6.7); V (3.5 4.5); Fe: 0.3; C: 0.08; N: 0.05; H: 0.01; O: 0.2 Nominal chemical composition (ti-6al-4v) ELI Ti Al (5.5 6.5); V (3.5 4.5); Fe: 0.3; C: 0.08; N: 0.03; H: 0.01; O: 0.13
There is a layer of oxidized film on the surface of titanium plate GR7, which is equivalent to a good long-term wear-resistant hair separating agent. The use of titanium plate saves the separating agent, makes the plate peeling easily, and eliminates the pre-treatment process. The plate is half lighter than the copper board. The service life of titanium plate is more than 3 times that of copper plate, which can reach 10 to 20 years according to operating conditions. The titanium plate GR7 can increase production capacity and reduce the production cost of electrolytic copper, so that it has better economic benefits. Grade 5 titanium alloy also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4titanium alloy, is the most commonly used alloy. It has excellent specific strength, excellent corrosion resistance and fracture toughness, as well as good weldability and ability to withstand extreme temperatures, and can be strengthened by heat treatment. The alloy was originally developed for the aerospace market and is widely used in aerospace structural components. Because of its very good biocompatibility, it is also widely recognized in the medical industry. Typical applications include aero-engine components, fuselage components, marine equipment, offshore oil and gas equipment, power generation, chemical industry, automotive moving parts, medical equipment, surgical implants, sports equipment. Titanium Sheet Grade 5 has excellent corrosion resistance, small density, high specific strength and good toughness and weldability. It has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. We also have ti6al4v eli and ti6al4v. https://www.yunchtitanium.com/titanium-sheet-1
Sheet :Thickness:0.6-10mm Max Length:1000mm Max width:340mm Pipe : OD10-150MM* wall thickness 2-5MM Materials : titanium GR1 GR2 Feature: 1.Working Temperature:-200-1000°C 2.Corrosion Resistance 3.High Filtering Efficiency 4.Metallic capacities, such as noise reduction,hot resistance,heat conduction,high strength and etc 5.Easy to welding and long working life Filter Shape: Could be cartridge filters,disc filters ,cup filters,cap filters,filter palte and etc Application: separation and purification of solid-liquid, gas-liquid and gas-solid in the petrifaction, hydraulic manufacturing and medical apparatus and instruments of basic industries. Technique parameters titanium powder sintering filter element technique parameters using temperatur:â?¤300°C filtering level filtration precision um maximum diameter um permeability coefficient 10-12m2 permeability m3/h.m2.kpa thickness mm compression strength Mpa/cm3 T9 0.2 2.5 1.5 0.6-10 3 T8 0.5 4 3 0.6-10 3 T7 1 6 5 0.6-10 3 T6 2 10 15 0.6-10 3 T5 5 15 0.04 40 0.6-10 2.5 T4 10 30 0.15 120 0.6-10 2.5 T3 20 60 1.01 250 0.6-10 2.5 T2 30 100 2.01 500 0.6-20 2.5 T1 50 160 3.02 800 0.6-20 2.5 The product performance can achieve and even exceed GB. The internal pressure of powder rolled and roll tube welding is more than 0.3Mpa
Titanium Grade 12 alloy is similar to Titanium Grades 2 and 3 except that Titanium Grade 12 has 0.3% molybdenum and 0.8% nickel. This offers enhanced corrosion resistance. Moderate Strength Titanium Excellent Cold Formability Excellent Weldability Excellent Resistance to High Oxidation Titanium Alloy Grade 12 has outstanding corrosion resistance and a combination of high strength and low density, with good ductility. Small additions of nickel and molybdenum have been made to this alloy resulting increase in corrosion resistance and high strength. It is particularly suitable for use in mildly reducing conditions, or where conditions vary from oxidising to reducing. 1). Processing method: cold-rolled, hot-rolled 2). Surface bright, polished, pickling, sand-blasted... 3). Standard: ASTM B265, ASME SB265... 4). Thickness:0.02~60mm 5). Width:50~3000mm 6). Length:1000~6000mm
TITANIUM PLATE TITANIUM BAR TITANIUM PIPE FLANGE FORGING
Titanium plates Commercially pure, alloy, and eli grade titanium plate and sheet *commercially pure titanium plate Available up to 3000mm wide x 6000mm long or cut to size Thickness from 5mm to 80mm *titanium alloy plate and 6al-4v eli plate Available up to 1800mm wide x 3000mm long or cut to size Thickness from 5mm to 80mm *commercially pure titanium sheet and alloy sheet Available up to 1000mm wide x 2000mm long or cut to size Thickness from 0.5mm to 5mm standard:astm b265 mil-t-9046j ams 4911h ams 4914 dms 1592f din 3.7*** gb/t 3620.1-94 gb 3620.2-94 Seaworthy wooden case
Mainly used in separation and filtration petrochemicals, liquid drug manufacturing, medical equipment, and other fields. Material: titanium Specifications:max.Width 340mm, max.Length 1000mm, max.Thickness 3.0mm Precision:0.2 to 65um
Quick details Place of origin: Shaanxi, china (mainland) Application: Industry, industry Thickness: 0.5~80 Width: 1000~2000, 1000~2000 Length: 2000~6000, 2000~6000 Technique: Cold rolled Grade: Gr1 Ti (min): 99.6% Brand name: Oy Model number: Titanium plate for electrolysis Name: Titanium plate Moq: 1kg Certification: Ce, iso9001, sgs Surface: Polished Material: Titanium
Cdm titanium plate/sheet/coil/foil 1.Titanium plate/sheet Thickness:0.5mm-150mm maximun width:2500mm maximum length:12000mm Ams 4911:gr5(t-i-6al-4v)for aerospace ams4916:ti-811, ti-15333 for military Astm b265, asme sb265:gr1, gr2, gr3, gr5, gr7, gr9, gr12, gr16, gr17 for industrial 2.Titanium coil Astm b265, asme sb265:gr1, gr2 for industrial use Astm f67:gr1, gr2, etc.For medical astm f136 gr5(ti-6al-4v) for medical use Thickness:0.5mm-3.0mm maximum width:1250mm lenghth as per specific request S Plywood outside, plastic film in side;or as per request
Specification of molybdenum foil: Grade: mo1, mo2, mo360, mo361, mo365 Standards: astm b386-2003 Thickness: 0.05-0.13mm Width: 110mm Methods of processing: rolling Supplying status: cold working (y), anneal (m)
Specification of tungsten plate/strip/foil: Grade: w1, w-ni-fe, w-ni-cu Standards: astm b760-2007 Thickness: 0.5-20mm Width:
Titanium Plate Specification 1. Material: Gr. 1, Gr. 2, Gr. 3, GR4, GR5, Gr. 7, Gr. 9, Gr. 11, Gr. 12etc 2. Size: Thickness 0.5-60mm, Width
Titanium sheet, titanium plate, titanium sheet and plate for industry Purity: 99.5% Shape: flat sheet Certification: ISO 9001:2000 Standard: ASTM B265, ASME B348, ASTM F136, ASTMB381, AMS4911, ASTMF67 and so on. Technique: cold rolled, hot rolled, annealed Size: Thickness mm Width mm Length mm >4.75 60 400 3000 1000 4000 0.3 6 400 1000 1000 3000 >4 10 400 3000 1000 4000 1.0 4.0 400 1000 1000 3000 0.3 4.75 400 1000 1000 3000 Grade: Gr1.Gr2.Gr3.Gr4.Gr5.Gr7.Gr9, Gr11, Gr12, Gr23, Ti15333, Ti-6Al-4V, Ti-6Al-4V ELI Standard: ASTM B265, ASME B348, ASTM F136, ASTM B381, AMS 4911, ASTM F67 Application: Industry ,Medical ,Chemical ,Aerospace, Standard part, Frame, Car beauty Properties: Low density, Resistance to corrosion and erosion-corrosion, Very thin, conductive oxide surface film, Smooth surface that limits adhesion of foreign materials, Surface promotes drop-wise condensation. 10pc/wooden case 1pc/pvc.
