3003 aluminum plate is an AL-Mn alloy, which is a widely used anti-rust aluminum. It has low strength (slightly higher than industrial pure aluminum), cannot be strengthened by heat treatment, has good corrosion resistance, good weldability, and poor machinability. Application areas: power battery shells, automobile heat shields, air conditioning ventilation ducts, etc. 3004 aluminum plate also belongs to a series of aluminum-manganese alloys. Its strength is higher than that of 3003 aluminum plate. It has excellent formability, good corrosion resistance, good weldability, poor machinability, and cannot be strengthened by heat treatment. Application areas: lamp base materials, radiators, food storage tanks, etc. Status: O, H32, H34, H36, H38, H111, H112 Surface treatment: smooth aluminum, mirror, patterned aluminum plate Packaging and transportation: simple packaging, refined packaging, logistics packaging, foreign trade shipping packaging (fumigated wooden pallet optional) Please contact us for specific parameters and we will give you a detailed quotation.
8011 aluminum coil adds Fe-Si elements on the basis of 1 series pure aluminum. If the total alloy elements exceed 1%, its alloy properties will have higher advantages. It is commonly used to make aluminum foil below 0.2 and aluminum coils of 0.2-0.5. Its performance is better than that of pure aluminum foil, and it is widely used in aluminum foil and aluminum coil thin materials. Status: O, H12, H14, H16, H18, H22, H24, H26 Supply method: aluminum coil, lamination, strips Surface treatment: smooth aluminum, mirror surface, patterned aluminum coil Packaging and transportation: simple packaging, refined packaging, logistics packaging, foreign trade shipping packaging (fumigated wooden pallet optional)
1050 pure aluminum coil has low density, good electrical and thermal conductivity, good corrosion resistance, and good plastic processing performance. It cannot be strengthened by heat treatment. The strength can be improved through cold deformation. The only form of heat treatment is annealing. 1060 aluminum coil is industrial pure aluminum with high plasticity, corrosion resistance, electrical conductivity and thermal conductivity. It has good elongation and tensile strength, but its strength is low and heat treatment cannot enhance the machinability. 1100 aluminum coil belongs to the aluminum series, its strength is relatively low, and it has excellent ductility, formability, weldability and corrosion resistance; the corrosion resistance can be further improved after anodizing, but it cannot be strengthened by heat treatment. Status: O, H12, H14, H16, H18, H22, H24, H26 Supply method: aluminum coil, lamination, strips Surface treatment: smooth aluminum, mirror surface, patterned aluminum coil
We have specialized ourselves in the manufacturing and marketing of various Raw material products based on the Construction & Automobile Industry, primarily extrusion Billets. Over the past decade we have been supplying and stocking them so that we can ensure our customers receive their required products Just-in-time. We get them manufactured using Airslip Technology & Continuous Homogenization furnaces. We control & monitor our quality using the latest technology, namely Rotary Flux Injector, Electro Magnetic Stirrer, SNIFF in Line Degassing System, ALSCAN (by ABB) Hydrogen Detector & Prefil Inclusion Detector etc. Our extrusion billet is capable of being extruded into a range of profiles for soft to high strength applications and good surface finish for value added finishing applications such as anodizing and powder coating. Typical uses of extruded products from the billet supplied by us include architectural applications, building and kitchen suite sections and they are used in a variety of engineering and transport applications. The use of extruded sections in automotive applications is an increasingly important area and one that is supported by the high-quality extrusion billet that we supply. In addition, we also supply Aluminium Alloy Ingots (various Alloys) & Aluminium Die Castings for the automobile sector. We offer billets of soft and hard alloy grades in diameters of 4", 4.5", 5", 6", 7", 8", 9", 10", 11", 12", 13" from Alloy Ranges 1xxx to 7xxx series.
About 1000Kgs/Mg pallet covering with plastic bag, or according to customer' requirement. Ingot weight : 15Kg+/- 0.5kg; 7.5+/-0.5Kg ; 300g+/-50g
Weight: 6KG Grade: LYD112, ZLD101, ZLD101A, ZLD102, ZLD106, ZLD107, ADC10, ADC12, AC4B, A3870, 51K, A365 etc. Technical specification: Due to many grades, please feel free to contact us if you want to know the detailed specification. Packing: Approx 500~900kg each bundle strapped by steel bands without any wooden pallets, total 13 layers including foot ingots, no double stacked bundles.
Aluminum bar can be used in aviation,aircraft construction,rivet, trailer wheel,the propeller components,metallic building material, forging material,welding material,etc.
Aluminum Ingot 99.7% Aluminum Ingot A7 Aluminum Alloy Ingot A356 Aluminum Alloy Ingot ADC12 Chemical Composition: Al Weight: 20/25kg Al (Min): 99%-99.9% Place of Origin: China (Mainland) Appearance: silvery white Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth.
Density: 2.702g/cm Melting point: 660.37 Boiling point: 2467.0 Color: silver white
Aluminum foil: 1050 3003 8011 8079
AL RODS
Aluminium Coil for Roofings PVDF Coated Aluminium Coil PVDF (polyvinylidene fluoride) coated aluminum coil is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum coil is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum coil is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity. Key Features of PVDF Coated Aluminum Durability: PVDF coated aluminum is resistant to weathering, UV radiation, and corrosion, making it suitable for use in a variety of outdoor applications.
Painting aluminum trim coil at home and in workshop Painting aluminum trim coil at home and in workshop â??Painting aluminum trim coilâ?? is often asked about since aluminum siding and trim has been applied in decoration of so many houses in the past years. Learning about painting process in the workshop helps you to fully understand steps you should do at home to repair items made of trim aluminum coil. Before getting an aluminum trim coil roll painted, manufacturers would first clean the roll surface completely, either in physical or chemical ways. Sometimes mechanical equipment is necessary, too. The purpose is to remove any materials that might prevent the following anodizing step from going on effectively. A completely cleaned surface of aluminium coil will obtain a thick condense layer of anodizing film on the surface, but there will be micro holes on the surface, which should be concealed to make the film stronger and harder. To paint the coil, pvdf, pe and pvc paints are all applicable. These paints are divided into primers and finishing coats. Multiple painting produces lasting color coated aluminum coil in severe natural conditions. If you need to paint aluminum trim coil at home, the steps are similar in exception to the anodizing part. You should first scrub the aluminum part to be painted with soapy water by combining 1 gallon of warm water and 1/4 cup of dish soap in a bucket. Then then scrub down the entire aluminum surface to remove dirt and residue with the brush soaked with soapy water. Wipe the aluminum with a clean, damp cloth, and if there are still residues on the aluminium surface, brush it again until it gets fully cleaned. After the surface gets dry, you should begin your painting. Now the point is, do you need a primer? If you want your paint work last as long as possible, the answer is yes, for a primer functions as a secondary protection line of the aluminium trim coil. Make sure the primer you choose is safe for use on aluminum. Do not move on the next step until the primer is dry. Then dip a paintbrush into the paint, and brush the paint onto the aluminum using long, even strokes. Never allow anyone touch the aluminium until the paint gets dry.
1000 series 2000 series 3000 series 4000 series 5000 series 6000 series 7000 series 8000 series From thin to thick We do aluminum only
Aluminium Ingot with the purity of 98% and 99% weight of 1 aluminium ingot is around 22kgs
Aluminium coilsin mill finiish or color coated form . Ranging from gauge of 0.2 to 4.00 mm ifor varied applications like Industrial, Electrical, Automotive, Defence, Aerospace, Aviation, Consumer Durables and other transport applications. Whole range of grades like 1100, 1200, 1145, 3003, 3005, 3004, 3105, 5005 can be supplied.
Aluminium foils from ULG ( 6 micron ) to heavy gauge ( 200 micron ) for varied applications like flexible packaging, pharma and food applications, insulation, battery, industrial filters , housefoil and containers for food packaging etc. Whole range of grades like 1100, 1145, 1200, 1235, 8079 ,3003, 8011, 8006, 8029 can be supplied.
Aluminium sheets in mill finiish or color coated form . Ranging from gauge of 0.5 to 6.00 mm ifor varied applications like Industrial, Electrical, Automotive, Defence, Aerospace, Aviation, Consumer Durables and other transport applications. Whole range of grades like 1100, 1200, 1145, 3003, 3005, 3004, 3105, 5005 can be supplied.
Aluminum scrap Density: 2.702g/cm Melting point: 660.37 Boiling point: 2467.0 Color: silver white
100% Aluminum Scrap / Aluminum UBC Can Scrap. Please contact us for more details
