African Metal Metal Products Suppliers and Manufacturers

Copper Scrap Copper Wire And Pipe Scraps for Sale. Type: copper wire Chemical Formula: Cu M.P.: 1083.4 �°C Density: 8.82g/cm3 Specifications scrap copper wire 1.Scrap copper wire 2.Cu up to 99.99% 3.Competitive price+High quality 4.Excellent service 5.Small order is acceptable Copper Scrap CERTIFICATE OF ANALYSIS Item Standard Result Cu% 99.9 min 99.99 Sb% 0.002max 0.001 As % 0.002max 0.0006 Fe% 0.005 max 0.0012 Ni% 0.002 max 0.0008 Pb % 0.005max 0.0025 Sn% 0.002max 0.0007 S% 0.005max 0.003 O% 0.002max 0.001 Zn% 0.005max 0.002 P% 0.001max 0.0002

PRODUCT DETAILS 1.Aluminum UBC/Extrusion Scrap 6063/Wire Scrap 99.99 SPECIFICATIONS: AL % 99.7 S % 0.4 FE % 0.25 MAX MG % 0.55 MAX CU % 0.05 MAX ZN % 0.05 MAX TI % 0.02 MAX PACKING : COMPRESSED CUBE 0.5 M3 MAX Product Details: Aluminum UBC Scrap aluminum scrap cans Tape: according to the purity of aluminum, we can supply aluminum scrap with purity of aluminum 97%, 95%, 84%. Specification of Aluminum scrap 6063 Si : 0.2-0.6% Fe : 0.35% Cu : 0.1% Mn :0.1% Mg : 0.45-0.9% Cr :0.1% Zn :0.1%

Copper Cathode: Purity: purity 99.99% Weight per Sheet:125kg Enough stock Copper Cathode Purity: purity 99.99%-99.97% min Weight per Sheet:125kg Copper Cathode , Cu=99.98% copper cathode Grade A Cu 99.97- 99.99 %

Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on â??Iron Concentrate Particlesâ?? will summarize the progress achieved in the last five years.

Our iron ore pellets and fines are made from magnetite and have high iron ore content â?? pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customersâ?? pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customersâ?? ironmaking processes.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom.[1][2][4] Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.[3] Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Carbon Cathode Blocks For Aluminium Smelter

Steel Billets

Industrial Minerals

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated