Low density polyethylene (LDPE), also known as high pressure polyethylene, is a kind of plastic material, it is suitable for thermoplastic molding processing of various forming processes, forming processing is good. LDPE is mainly used for thin film products, but also for injection products, medical devices, medicine and food packaging materials, blow molding hollow molding products and so on.
Item
Property Unit
Typical Value
Mass density g/cm 3 0.941-0.959
Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0
Tensile yield strength MPa 19.0
Flexural modulus Mpa 965
Elongation@ break % 400
Impact Embrittlement temperature centidegree MAX -118
Dielectric Constant 100KHZ 2.32
1MHZ 2.31
Loss Tangent 100KHZ MAX 0.0001
1MHZ MAX 0.0001
Volume resistivity OHM-CM MIN 1x10 15
Application
Mainly used for the production of high toughness of the telephone,cable insulation material
LDPE:
Physical Properties Test Method Nominal Value Unit
Density ISO 1183 0.921 g/cm3
Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min
Hardness
Shore Hardness (shore D) ISO 868 45
Mechanical Properties
Tensile Modulus ISO 527-2 175 MPa
Tensile Strength Yield, ISO 527-2 9.0 MPa
Break, 13.0 MPa
Tensile Strain(Break) ISO 527-2 850 %
Modulus of Elasticity Internal Method 250 MPa
Thermal
Vicat Softening Temperature ISO 306/A50 89.0 �°C
Melting Temperature (DSC) DIN 53765 108 �°C
Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C
Heat of Fusion DIN 53765 110 J/g
Electrical
Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm
Dielectric Strength ASTM D149 30.0 kV/mm
Dielectric Constant (60Hz) ASTM D150 2.20 %
Dissipation Factor (60 Hz) ASTM D150 0.00050
LLDPE
Properties Test conditon Test method Test data Unit
Density 0.91
MFI 2
Drop impact strength ASTM D-1709 90 g
Elongation ,vertical/horizontal ASTM D-882 600/800 %
tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm
elongation ASTM D-638 930 %
tensile strength ASTM D-638 180
tensile strength,vertical/horizontal ASTM D-882 380/350
Vicat softening point ASTM D-1525 103 C
melting point ASTM D-2117 126 C
Turbidity ASTM D-1009 12 %
45 glossness ASTM D-2457 75 %
We produced different qualities in terms of Pet flake size and colors however the product standards are ensured as per international parameters of end use of the Pet Bottle Flakes.
Currently we are enganged in recyling Pet bottles to make Pet flakes. We have collection center in different locations of Bangladesh for collecting PET bottles. After collection, all the bottles are sorted and the lables are removed in our own factory. It is then crushed and washed properly by a team of highly skilled trained professionals to obtain the best quality .It is then tested in our own advanced laboratory for further inspection of quality of the product.After the quality is confirmed it is then packed in plastic bags of 25kg/ 50kg.
Product List:
- Pet Flakes Clear
- Pet Flakes Green
- Pet Flakes Brown
PE Granules
High density polyethylene (HDPE) for non-toxic, tasteless, no smelly white particles, melting point is about 130 �° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
Low DENSITY POLYETHYLENE (LDPE), commonly known as high-pressure POLYETHYLENE, is mainly used in plastic bags and agricultural film due to its LOW DENSITY and the softest material.
Linear Low Density Polyethylene (LLDPE) is a copolymer of ethylene and a small amount of advanced olefin in the presence of catalyst.LLDPE is similar to LDPE in appearance, with poor transparency and good surface gloss. LLDPE has the advantages of low temperature toughness, high modulus, bending resistance and stress cracking resistance, and good impact strength at low temperature.
We have a wide range of grade PE materials with different physical properties. If the table does not meet your requirements, please feel free to consult us we will try our best to meet all your requirements for plastic granules.
AS PS ABS PLA HDPE Granules
Acrylonitrile - styrene copolymer.
Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as
engineering plastics.Excellent heat resistance and solvent resistance.
Application.
1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases.
2. Special grade: blade of fan, batteries housing, lighters.
3. Refrigerator Sleeves, Miscellaneous
4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling
5. High Transparency, Heat Resistance, chemical resistance
PC + Glass Fiber reinforced (GF)
The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating
improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm.
Grade: (ML3410-30 / MH3515-30 / MN-3110-30)
1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF)
General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact.
Application: Watch parts, switches and nobs, OA equipment.
2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF)
Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage
and dimensional stabilities.
Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames.
3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF)
MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance,
surface aesthetics and weld line strengths.
Applications: Meter cases, electrical and electronic housings.
380 Plastic Raw Materials Suppliers
Short on time? Let Plastic Raw Materials sellers contact you.
LDPE Granules
Low-density polyethylene (LDPE) is a synthetic resin using a high-pressure process via free radical polymerization of ethylene and is therefore also called high-pressure polyethyleneâ. It features light, flexible, good freezing resistance and impact resistance. LDPE is chemically stable. It has good resistance to acids (except strongly oxidizing acids), alkali, salt, and excellent electrical insulation properties. Its vapor penetration rate is low.
HDPE 7000F is high density polyethylene film grade which well known for the high quality film applications. This grade is excellent for thin film processing with high mechanical strength, good stiffness and good heat sealability. It is suitable for producing general purpose packaging films in a wide range of size and thickness.
Specification:
Make barrel, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating.
Application:
HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams.
Application
Suitable for film, heavy packaging film, cable insulation materials, blow molding and foam products.
Isotactic Polypropylene Raffia grade (PP Raffia), primarily made from woven sacks and jumbo bags, suitable for bitumen water proofing membranes application, with two main grades, first one is Black Color with MFR 7-10 g/10min-2.16kg @230 C. degree, and the second type is Dark Green Color with MFR 11-14 g/10min-2.16kg @230 C. degree which is suitable for high quality product of Bitumen Water Proofing Membranes as an additive to improve mechanical properties and also for injection application as vegetable crates and chairs.
Polypropylene Homo Polymer resins primarily made from consumer and industrial waste, with blue, red, green and extra colors, suitable for extrusion mats and injection applications, MFR 14.0-18.0 g/10min - 2.16kg @230 C. degree.
Polypropylene Co-Polymer resins primarily made from battery and industrial waste, with black color, suitable for injection applications, MFR 10.0-12.0 g/10min-2.16kg @230 C. degree.
Acrylonitrile Butadiene Styrene, or ABS plastic, is a thermoplastic. It is an amorphous polymer comprised of three monomers, acrylonitrile, butadiene and styrene.
ABS is a plastic made of acrylonitrile, butadiene and styrene. It is called engineering plastic because it is a material with higher mechanical and thermal properties than conventional plastics, which also means that it is more difficult to print.
ABS is a common thermoplastic used to make light, rigid, molded products such as pipe, automotive body parts, wheel covers, enclosures, and protective head gear.
High Density Polyethylene resins black, red, and blue colors, primarily made from jerry cans, suitable for extrusion and blowing applications, MFR 0.35-0.65 g/10min-2.16kg @190Ã??C.
color white
Shape granulates
Application film grade
Grade blown film grade
Feature High Strength
Brand Name N/A
Model Number N/A
Grade Virgin Film Injection Grade
Application Plastic Products
Product name Low-density Polyethylene (LDPE) Granules
Material 100% Virgin LDPE Raw Materials
Appearance Natural White Granule
Color Transparent White
Feature Recycled Material
Name LDPE Granules Recycled
Shape Pellet - Granules
Keywords Virgin Low Density Polyethylene
Brand Name QISHEN
Model Number HD670418
Melt Flow Rate 45 g10min
Density 0952 gcm
Shape Pellet
Model HD670418
Certificates ISO9001 ISO14001
Process Injection molding
Packaging and delivery
Packaging Details 25 kgbag Standard package
Or we can make it per customers requirement
Port shanghai
Selling Units Single item
Single package size 79X47X23 cm
Single gross weight 25000 kg
Supply Ability
Supply Ability 500000 TonTons per Month
Place of Origin Netherlands
color white
Shape granules
Application electronic and electrical components, automotive parts, General grade, filling grade, wire and cable grades, plate grade, Food Grade, profiles, fibers, pipe grade, film grade
Grade hot melt grade, molding, demoulding grade, extrusion grade, blown film grade, foaming grade, coating grade
Feature High flow, aging resistance, reinforced grade, ANTISTATIC, standard grade, High Strength, high temperature resistance, conductive grade, transparent grade
Brand Name Custom
Model Number Virgin HDPE Granule -
Product name Virgin HDPE Granule
380 Plastic Raw Materials Suppliers
Short on time? Let Plastic Raw Materials sellers contact you.
