African Iron Suppliers and Manufacturers

Our iron ore pellets and fines are made from magnetite and have high iron ore content pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customers pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customers ironmaking processes.

Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.

Industrial Minerals

Sr. No. Grade Name Specifications C S Si Mn P Ti 1 Basic Grade - BG06XA 3.5% - 4.6% 0.08% max 1.00% max 0.4% - 1.2% 0.10% max Nil 2 Basic Grade - BG06X 3.5% - 4.6% 0.05% max 1.25% max 0.4% - 1.2% 0.140% max Nil 3 Basic Grade - BG06X 3.5% - 4.6% 0.08% max 1.00% - 1.25% 0.4% - 1.2% 0.10% max 0.07% max 4 Basic Grade - BG05 3.5% - 4.6% 0.07% max 1.25% - 1.50% 0.4% - 1.2% 0.14% max Nil 5 Basic Grade - BG05A 3.5% - 4.6% 0.07% max 1.25% - 1.50% 0.4% - 1.05% 0.10% - 0.14% Nil 6 Basic Grade - SFG05X 3.5% - 4.6% 0.07% max 1.50% - 1.75% 0.9% Max 0.10% max 0.100% Max 7 Basic Grade - SFG05X 3.5% - 4.6% 0.07% max 1.50% - 2.00% 1.05% Max 0.10% max 0.100% Max 8 Foundry Grade - FG10 3.5% - 4.6% 0.07% max 1.75% - 2.00% 0.4% - 0.8% 0.140% max

We have Iron Ore with 70% Ti guaranteed , we can supply in huge volume on FOB basis only.

Element % Si O2 8.4 Ti O2 0.2 Fe 52.4 Fe2 O3 74.9 Alc O3 5.62 Fe O 0 Ca O 5.15 Mg O 0.34 Na2 O 0.16 K2 O 0.05 Mn 0.54 S O3 1.3 P2 O5 0.4 L.O.I 3.7

Iron ore is a mineral substance which, when heated in the presence of a reductant, will yield metallic iron (Fe). It almost always consists of iron oxides, the primary forms of which are magnetite (Fe3O4) and hematite (Fe2O3). Iron ore is the source of primary iron for the world's iron and steel industries. It is therefore essential for the production of steel, which in turn is essential to maintain a strong industrial base. Our monthly ability to export Iron Ore is of 2000-5000MT per month.

SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.