U Type Silicon Carbide Rod U-shaped silicon heating element is manufactured by taking two carefully-matched SiC rods and welding a thickened silicon carbide bridge. This element provides for wiring both tail ends from one side of the furnace. The tail ends of the cold ends are metallized with aluminum, which can provide a low-resistance contact surface to the aluminum connection straps and clamps.Features of silicon carbide rod 1. High strength and excellent shock resistance; 2. Heat source is free of noise and air pollution; 3. Anti-oxidization; 4. Anti-corrosion, 5. Long service life, 6. Little deformation, 7. Easy installation and maintenance. 8. Excellent specific rate of heat zone resistance and cold end resistance, 9. Avoiding over-temperature of cold ends to damage the furnace body. 10. Saving energy
Buy Garnet 13 Pc 60.60 cts no heat no inclusions Round, Oval, Mix cut .
Grains :F 36 46 60 80 70 100 120 Al2O3:95% min Brown fused alumina (BFA) is a type of synthetic abrasive which is made by fusing bauxite, iron oxide and coke at high temperatures in an electric arc furnace. It has a brown color and is used for grinding, polishing, blasting and cutting applications. BFA is known for its high hardness, toughness, and resistance to wear and corrosion. It is also chemically stable and does not react with acids or alkalis. These properties make it a popular abrasive for metalworking, surface preparation, and refractory applications. BFA is available in a range of grit sizes and can be used for both wet and dry blasting. It is commonly used for cleaning and preparing surfaces for painting or coating, removing rust and scale, and shaping and finishing metal parts. In addition to its abrasive properties, BFA is also used as a refractory material in the production of ceramics, glass, and cement. It is also used as a filler in plastics, rubber, and other composites. Package:25kg/bag,1000kg/jumbo bag
Grains :F 36 46 60 80 70 100 120 Al2O3:95% min Brown fused alumina (BFA) is a type of synthetic abrasive which is made by fusing bauxite, iron oxide and coke at high temperatures in an electric arc furnace. It has a brown color and is used for grinding, polishing, blasting and cutting applications. BFA is known for its high hardness, toughness, and resistance to wear and corrosion. It is also chemically stable and does not react with acids or alkalis. These properties make it a popular abrasive for metalworking, surface preparation, and refractory applications. BFA is available in a range of grit sizes and can be used for both wet and dry blasting. It is commonly used for cleaning and preparing surfaces for painting or coating, removing rust and scale, and shaping and finishing metal parts. In addition to its abrasive properties, BFA is also used as a refractory material in the production of ceramics, glass, and cement. It is also used as a filler in plastics, rubber, and other composites. Package:25kg/bag,1000kg/jumbo bag
Hydro grossolar garnet green semi translucent 6.5 above hardness 25 kg sample avelible in peshawar kpk pakistan and huge quantity in mine
Garnet as a natural abrasive can be used for waterjet cutting because of its high hardness, high cutting speed. It is a cost-effective alternative to silica sand, mineral slags and steel grits and shot as the perfect symbiosis of grain size, density and hardness/durability creates the optimum abrasive efficiency, lowest abrasive consumption (kg/m2) at the highest production rates (m2/hr). Compared with rock garnet, river garnet sand can keep the cutting surface smooth and flat. Because river sand is formed after a long time of impact, so its grain edge surface is more rounded, less damage to the material. Products cut from river garnet are more popular with consumers. -Sharpe Angular Edges; -High Hardness, Faster Cutting Efficiency; -Uniform Size Distribution, No Stuck in Nozzle; - No Free-Silica.
Product Application ( 4-1/2 inch cut off disc) ROBTEC 4-1/2 inch 115x1.2x22.2mm Cut Off Disc for INOX/Steel, 80M/s, MPA EN12413, R.P.M: 13300 can be used for cutting metal/steel bars, pipes, steel plates, metal sheet, which is widely applied in metal works. SPECIFICATIONS FOR 4-1/2 INCH CUT OFF DISC (INOX/STEEL) Details Grain Aluminium Oxide Max Line Speed 80m/sec R. P. M 13300 Nets number Double Fiberglass Nets Usages Applications INOX/steel bars, metal sheets, steel plates, meta/steel pipes Machine 4.5 inch Angle Grinder Main Features 1) Adopts germany techniques and advanced grains 4-1/2 inch cut off disc 2) Automatic production line for 4-1/2 inch cut off disc 3) Strict QC control in each process of cutting disc 4) Eco-friendly, provide Brand supports to customers 5) High and Professional Quality level cutting disc manufacturer Advanced Abrasive Grain Name: Aluminium Oxide Original: China Domestic famous abrasive grain factory supplied. A tough, sharp abrasives which is highly suitable for grinding metals of high tensile strength. Its thermal properties make it an excellent material for use in the manufacture of refractory products. Main Features Name: Metal/steel cutting disc Brand: ROBTEC Original: China Extra thin high speed cutting disc, more durable than other China brand same diameter cutting disc.
Abrasive flap wheels available in All Grits and Sizes. Made from high Standard Aluminum Oxide and Silicon Oxide Hard Grain.
Cotton buffing wheel made up of Finest cotton for high gloss mirror like finish on stainless steel and various other Metals.
Garnet
RGT Supreme is tested and approved for project under Exxonmobil, Petronas, Shell just to name a few. We have our own mines in India and production facory in both india and Malaysia.
a).Name of product: Garnet Abrasive 30/60 mesh b).Price of product: Contact Us c).Product Origin : India d).Specification: Technical data sheet and test report e).Payment Terms : To be advised f).Packing : 25kg in 1 ton jumbo bag / Loose 1 ton bulk bag g).Minimum order: Based on Containers h).Quality: Dusty Free & Washed i). Sample Available : 100-150 grams.
Calcined alumina oxide powder Alumina, also known as activated alumina is manufactured from aluminium hydroxide by dehydroxylating it in a way that produces a highly porous material; this material can have a surface area significantly over 200 square meters/g. The compound is used as a (to keep things dry by absorbing water from the air) and as a of , and in . It is made of (alumina; Al2O3), the same chemical substance as and (but without the impurities that give those gems their color). It has a very high surface-area-to-weight ratio. That means it has a lot of very small pores, almost like tunnels, that run throughout it The appearance is white crystal powder with uniform particle size, stable chemical property, good crystal phase stability, difficult to dissolve in acid and alkali, and has good sintering activity. Aluminum oxide can be used as raw material for preparing high purity aluminum oxide powder. Aluminum oxide can be used in long afterglow phosphors, three color phosphor, abrasive materials, transparent ceramic lamp, high-pressure sodium lamp, catalyst carrier, EP-ROM window, crystal, ruby, sapphire crystal, electronic ceramics. It is widely used in electronics, chemicals, petroleum, refractories, ceramics, glass, plastics, textiles, building materials, abrasives, paper and medicine, and many other fields.
We supply sea shell Grit used in layer poultry feed for calcium
Which is made of abrasive cloth conglutinated with resin,which is ranged radiantly like fan on a soft core .It can be installed to portable or special grinders,It is characterized by high fficiency,anti-clog,quick elimination of heat not ham to work piece,low cost. Work surfaces:metal tubes ,weld ,stone,wood and plastics. can be customized according to customer's requirement Warning:ear, eye, face and body protection
AL2O3 white alundum powder, abrasive material white corundum price White fused alumina is one of the most popular alumina abrasives. White fused aluminum oxide is electrically fused in arc furnace with alumina powder as main raw material. As a kind of alumina grinding media, it is widely used in polishing, lapping and blasting.
The flap disc machine is for making the flap disc. Humanized mechanical structure design, easy to operate, high degree of automation, set the put-flap and press-discs as one, single operator can easily complete the operation. Use imported servo motor and driver, stable equipment, high production efficiency, measured speed is 3.7~4 seconds per disc. Selection of European standard industrial materials, by the professional CNC machining overall fine milling, fine grinding, molding at once, stable and durable. The drive parts adopt international famous brand linear guide rail, high speed servo motor and reducer, which can respond to micro displacement and feeding accurately. International well-known brands of electrical components and industrial level control system, perfect function and stable performance. Equipped with rotary multi station turntable mechanism, stable and fluent position conversion, accurate positioning and high efficiency. Use the international famous brand photoelectric switch to detect backing and abrasive paper, auto pass no-backing workstation and no-glue backing, stable and accurate. The flaps angle and length can be adjusted accurately, and the operation is simple and convenient. High utilization rate of materials, and the glue quantity and the flap length and quantity can be freely set. Glue system adopts cycle constant temperature control system, which provides temperature for glue, and it is convenient and efficient. Uses the modular assembly, the adjustment and maintenance of the machine is convenient. url:http://www.hg-abrasive.com
Garnet
We are Supplier Garnet Abrasive 20-40/30-60/20-60/80 mesh Duble wash and Good quality material packing in 1MT / 2MT Jambo Bags
The third generation auto flap disc machine is developed specifically for the production of abrasive flap disc and non-woven flap disc. The machine can auto pick the backing, detect backing, auto quantitative gluing, cut & put flaps, shaping and auto pick up finished flap disc, with high degree of automation, remote monitoring and maintenance, uniform flap arrangement, improved efficiency and stable quality. It can produce 6000pcs per 8 hours for a single operator.
