Find Verified Abrasives Suppliers, Manufacturers and Wholesalers

Good prices 80 mesh sand garnet for water jet cutting
Garnet, the popular abrasives for waterjet cutting, blasting cleaning,water filtration, bonded abrasive, anti-slipping material, athletic field, polishing abrasive and other applications.


Physical characteristics of Garnet

Physical Items Grains

Color Red Brown

Toxicity None

Melting Point 1300°C

Solubility in Water Not Soluble in Water

Specific Gravity 3.90-4.10 g/cm3

Conductivity Less Than 125us/cm

Mohs Hardness 7.5



Average Chemical composition of Garnet

SiO2 37.09%

Al2O3 20.11%

FeO 29.73%

Fe2O3 1.83%

TiO2 0.46%

MgO 5.26%

CaO 2.09%

MnO 1.19%




The usage:

1. Free grinding and polishing.

2. Resin abrasives.

3. Coated abrasives.

4. Sandblasting.

5. Waterjet cutting.

6. Water filtration.

7. Stone washing.

8. Surface preparation

Alumina grinding ball:
Usage:wet grinding
Al2o3(%):92
Hardness(mohs):9
Features:
Higher density;
Higher hardness;
Higher wear resistance;
Higher grinding efficiency.
Application area:
Used in high speed stirred grinding mills;
Ball mills as abrasive media for ceramic raw materials;
Glaze materials in ceramic factories, cement factories, enamel factories;
Used in glass work, owing to the excellence of high density, high hardness, and high wear rate. During the abrasive/grinding processing, ceramic balls will not break up, they will not pollute the grinded material as well;
The mix and crush procedure of ceramics, glass, glaze and frits, chemical and plastic industries.
Method of application:
Used in wet grinding method:
A. Final assembly of ball in ball mills a total volume of 55%.
Empirical formula: m=3.14*r2*d*l*25%/1000
(note: m= charged alumina ball quantity number of added alumina balls
D= alumina ball density(g/cm3)
D= alumina ball density (g/cm3) density of alumina ball
R= radius of ball mill
Radius r = radius of ball mill ball mill
L= length of ball mill
Length l = length of ball mill ball mill)
For a new installation of ball mill, loading specifications and dimensions of the ball depends on the size and weight of the ball mill.
B. Increase volume of ball = initial amount of ball*wear rate*grinding time
Used in dry grinding methods:
Dry grinding is widely used in mining, ceramics, powders and other industries. Wear of grinding media for split industry pollution of raw materials, we developed the dry grinding ball of low toughness, wear, solves the grinding media of widespread pollution problems of raw materials.
Dry grinding with grinding ball ratio depends on the raw material of hardness and the grinding of rough, usually by isostatic molding grinding balls.

Low carbon steel shot as abrasive media
Longer lasting and more durable
Sae standard
Save shot blasting cost
Material: q195

Residual amount of low carbon steel shot, common low carbon steel shot and high carbon steel shot respectively is 70%, 40% and 20% after impacted 500 times. Low carbon steel shot is low wear, low breakage and long service life.

In addition, low carbon steel shot could be applied to all the fields suitable for common steel shot.

We promise to offer you the right low carbon steel shot with best price and best service! all items we are selling are best quality among the similar products. All items will be strict tested before shipping! welcome your negotiated prices, we promise your good price will be our consideration. We are sincerely looking for your cooperation.

1. Common size  : 0.5-1.0 , 1-2 . 2-4 .3-6 .6-8 .20# .30# .36# .46# 60# 80# 120# 150# 180# 200#......
Special specifications can be made according to the requirements of customers.

2.Application:
garnet for sandblasting
garnet for water jet cutting
Garnet for Water Filtration
Garnet for Abrasive Paper

Product name: steel shot
Product category: Steel shot
Product specification: S70-S930
Operative standards:
In accordance with standards of GB/T18838.8 - 2008 Steel shot and Steel grit, SFSA20-60 Cast Steel Abrasive, SAE J827 Cast Steel Shot, SAE J1993 High Carbon Steel Grit, YB/T5149-1993 Cast Steel Shot, YB/T5150-1993 Cast Steel Grit, ISO11124-3High carbon cast steel shot and grit.

Specification
 
Name cast steel shot 
Chemistry (C) 0.70~1.20%
(Mn) 0.35~1.20%
(Si) 0.40~1.20%
(S) =0.05%
(P) =0.05%
Average Hardness
  40~50HRC (377-509HV)
52~56HRC (543-620HV)
56~60HRC (620-713HV)
Deviation ±3.0HRC(±40HV)
Micro structure   
tempered martensite
or tempered troostite
 Density
  7.2g/cm3
size  0.2,0.3,0.5,0.6,0.8,1.0,1.2,1.4,1.7,2.0,2.5mm
SAE    S70, S110,S280 S330,S390,S460,S550,
S660,S780,S930

Silicon carbide raw material (brick, granular, and powder) in multiple qualities: SiC98, SiC90, SiC75

Silicon carbide paddle
Silicon carbide paddle performance
Silicon carbide paddle, also known as silicon carbide paddle, silicon carbide cantilever beam, is a silicon carbide ceramic product sintered at a high temperature of 1850�°C. It is used below 1350�°C. Silicon carbide paddle, silicon carbide paddle, silicon carbide cantilever beam The strength can still reach 380MPa; its hardness is second only to diamond, and it will not wear for a long time.

Application of silicon carbide paddle
Silicon carbide paddles and silicon carbide roller are indispensable carriers in the production and synthesis of semiconductor and solar wafers. It is used in the (diffusion) coating process of polycrystalline silicon wafers or monocrystalline silicon wafers in diffusion furnaces, and it is used to carry and transport silicon wafers in a high temperature environment (1000---1300â??). It is a semiconductor wafer loading system key components.

Specifications of silicon carbide paddle
1. The company's current product types of silicon carbide paddleare divided into left and right paddles, single-layer paddles, double-layer paddles, etc. Regular sizes are 2378mm, 2550mm, 2660mm, 2045mm, 2270mm, 2378mm, 2394mm, 2450mm, 2550mm, 2640mm, 3748mm, 3600mm, 3700mm, 3900mm.

2. Other sizes of high-purity silicon carbide paddle can also be developed and manufactured according to customer requirements.

Silicon Carbide(SiC) has become a promising material in semi-conductor industry, due to the development of SiC material manufacturing and the decrease of the cost in recent years.

Silicon Carbide (SiC) is a wide bandgap material and is the typical representative of the third-generation semiconductor materials. Due to the wide bandgap, high thermal conductivity, high saturated carrier mobility, high threshold breakdown electric field strength, and high chemical stability, it is an ideal substrate for the fabrication of power electronics and radio frequency devices operating at extreme environments, such as high temperature, high frequency, high power, and strong radiation. Therefore, SiC has extensive applications in white-light illumination, automobile electronic, radar communication, aeronautic and aerospace, and nuclear radiation.

We have the ability to make processing, like cutting, drilling, dicing, polishing, etc. We have rich experiences on the micro-machining on the hard but brittle materials.

Emery general term, silicon carbide, also can be brown fused alumina, also can be a black corundum SiC, also known as silicon carbide, or white corundum.Pure is a colorless crystals, density of 3.06-3.20.Hardness is very big, is about 9.5 degrees Morse, generally is colorless powder particles, after grinding, can be used as a polishing powder, polishing paper could be prepared, but also grinding wheel and strop friction surface.By the sand and the right amount of carbon in electric furnace to strengthen heat.
emery characteristics
Emery inside contain no cause silicosis free silicon harmful substances, do not contain toxic or radioactive pollution of heavy metals, because the product density is larger, seldom produce dust, effectively guarantee the operator's health, in addition, the characteristics of the low consumption and recycled products can greatly reduce the waste after the products use processing and cost.
Contact: Ms. Lisa

High / Low Carbon Steel Shot, Steel Grit, Bearing Steel Grit, Steel Cut Wire Shot, Grinding Steel Shot, Stainless Steel Cut Wire Shot, Alloy Grinding Steel Shot, And Aluminium / Aluminum, Zinc, and Copper Cut Wire Shots, Metal Abrasives.

Steel Shot is made from high-quality carbon steel and has a metallic gray or silver color. With a hardness of 50-60 HRC, it is highly durable and resistant to wear. Steel Shot is available in various sizes, making it ideal for shot blasting, peening, and surface cleaning applications. Its spherical shape ensures consistent impact, providing uniform surface treatment and efficient cleaning. Typically packaged in 25kg/50kg sacks, bulk bags, or drums, Steel Shot is a reliable choice for industries requiring effective and efficient abrasive blasting.

Size:S110/S170/S230/S280/S330/S390/S460/S550/S660/S780

Garnet as a natural abrasive can be used for waterjet cutting because of its high hardness, high cutting speed. It is a cost-effective alternative to silica sand, mineral slags and steel grits and shot as the perfect symbiosis of grain size, density and hardness/durability creates the optimum abrasive efficiency, lowest abrasive consumption (kg/m2) at the highest production rates (m2/hr).
Compared with rock garnet, river garnet sand can keep the cutting surface smooth and flat. Because river sand is formed after a long time of impact, so its grain edge surface is more rounded, less damage to the material. Products cut from river garnet are more popular with consumers.
-Sharpe Angular Edges;
-High Hardness, Faster Cutting Efficiency;
-Uniform Size Distribution, No Stuck in Nozzle;
- No Free-Silica.

Abrasive flap wheels available in All Grits and Sizes. Made from high Standard Aluminum Oxide and Silicon Oxide Hard Grain.

AL2O3 white alundum powder, abrasive material white corundum price

White fused alumina is one of the most popular alumina abrasives. White fused aluminum oxide is electrically fused in arc furnace with alumina powder as main raw material. As a kind of alumina grinding media, it is widely used in polishing, lapping and blasting.

White Fused Alumina (WFA) is kind of electro-corundum, which produced by controlled melting of alumina in an electric arc furnace. Its iron-free, ultra purity and extremely hardness make it as excellent materials in sandblasting, precision casting, abrasive and refractory.

SEPPE Garnet is an integrated garnet mining, processing, shipping and distribution organisation providing the best quality industrial garnet for the surface preparation and waterjet cutting industries. It is a cost-effective alternative to silica sand, mineral slags and steel grits and shot as the perfect symbiosis of grain size, density and hardness/durability creates the optimum abrasive efficiency, lowest abrasive consumption (kg/m2) at the highest production rates (m2/hr).
SEPPE garnet for waterjet cutting, they're extracted from almandine, since it is more angular in form, more efficient in cutting. Mixed with very high pressure water, garnet is used to cut steel andother materials in waterjets.
SEPPE garnet for sandblasting, it is a alluvial garnet grains which arerounder, more suitable for blasting treatments.

new professional sharpener for knives and scissors knives DRY, a fast, easy to use and very versatile sharpening machine.

In just a few seconds, you can sharpen all types of knives (kitchen, butcher, tailoring, etc. ...) and scissors of every type.

knives DRY is part of the knives and knives Jnr family of products.

With the felt buffing wheel on the left it is possible to polish and finish the newly sharpened blade.

With the abrasive sharpening paper on the right you can resharpen kitchen knives and scissors.

knivesDRY is supplied with a replacement abrasive paper and a stick of finishing paste for the buffing wheel which

Place of Origin:CN;HEB
Usage:waterjet cutting
Material:Garnet
Brand Name:JUHONG
Abrasive Grain Sizes:80 mesh
Shape:Granule
Color:Dark Red
Name:Garnet 80 mesh for waterjet cutting
Chemical Composition:SiO2,Al2O3,Fe2O3+FeO
Moh's hardness:7.5
Fracture:Sharp
Specific Weight:3.9g/cm3
Melting point:1300
Grade:Top Grade
Customization:Available

Place of Origin:CN;HEB
Usage:Polishing
Material:Garnet
Brand Name:JUHONG
Abrasive Grain Sizes:120 mesh
Shape:Granule
Color:Dark Red
Name:Garnet 120 mesh for Polishing
Chemical Composition:SiO2,Al2O3,Fe2O3+FeO
Moh's hardness:7.5
Fracture:Sharp
Specific Weight:3.9g/cm3
Melting point:1300
Grade:Top Grade
Customization:Available

Place of Origin:CN;HEB
Usage:Sandblasting
Material:Garnet
Brand Name:JUHONG
Abrasive Grain Sizes:18-35 mesh
Shape:Granule
Color:Dark Red
Name:Garnet 18-35 mesh for sandblasting
Chemical Composition:SiO2,Al2O3,Fe2O3+FeO
Moh's hardness:7.5
Fracture:Sharp
Specific Weight:3.9g/cm3
Melting point:1300
Grade:Top Grade
Customization:Available