Metal abrasive Here belowed is the scope of our products Steel shot: s70 s110 s130 s170 s230 s280 s330 s390 s460 s550 s660 s780 Steel grit: g10 g12 g14 g16 g18 g25 g40 g50 g80 g120 Steel cut wire shot: 1.0mm 1.2mm, 1.5mm, 2.0mm Stainless steel cut wire shot, 0.3mm, 0.4mm, 0.5mm, 1.6mm, 0.8mm, 1.0mm Steel abrasives are used to clean a wide variety of surfaces and parts, for example De-sanding and cleaning foundry castings Descaling metal sheet, billets and profiles produced by the steel industry Surface preparation prior to coating Steel abrasives are used in the following industries and applications: Foundries, metal producers, shot peening, surface preparation, general cleaning, granite cutting, Chemical composition of the products: C 0.70-1.20% mn 0.60-1.20%, si 0.40-1.20%. Hardness: Steel shot: 40-60hrc Steel grit: 42-66hrc Steel cut wire shot:1.0mm:51-53hrc ; 1.5mm:41-45hrc Density: Steel shot: 7.4g/cucm Steel grit: 7.6g/cucm Steel cut wire shot:7.8g/cucm Microstructure: tempered marten site High strength, long lasting ervin life: cast steel shot and grit: 2000 cycles; Steel cut wire shot: 2800 cycles. 25kg in one bag, 40bags on one pallet, 20mt for each container
Abrasives Material: brown fused alumina, 110g/sqm blue latex paper for car sanding and painting and furniture and wood. 2.Material: silicon carbide, 110g/sqm brown latex paper for car sanding and metal and marble and stone 100pcs per bale and 10bales per carton
Abrasives 100 lbs
Sanding screen (open mesh abrasive) Application: Sanding surface of woodworking,plaster,metal,plastic , enamel and remove rusty spots of metal materials and making grinding and polishing treatment. Performance include: It's flexible for sanding contoured and irregular surfaces and fully Waterproof can be rinsed to allow for reuse. Open mesh screen design resists clogging and both sides coated with abrasive grains of the screen . The grinding and cutting efficiency and durability is far beyond the conventional abrasive material. It is practically self cleaning, last longer, and cut through joint compound faster. It can be finished as sheets, discs, rolls or according to your requirements. Specification include: Sanding screen sheet (size): 3-5/16 x 11, 3-2/3 x 11(9), 4 x 5-1/2, 4-3/16 x 11, 9 x 11. Sanding screen floor discs (size): 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24. Sanding screen rolls(size): Width:1, 1-1/2, 2, 3, 4, 5, 6, 36. Length:25yds , 50yds, 100yds. Available grit sizes: P40,P60, P80, P100, P120, P150, P180, P220, P240, P320, P400, P600 Grain: Silicon carbide/ Aluminum oxide Standard Packing
Synthetic emery Al2o3 -- 55%, fe2o3 -- 25% 50 kg bag packing , as per customer specification with special requirement.
Nylon abrasive scouring pad 5pcs/set, 15*10*0.5/0.6/0.7cm
Metal abrasives Steel shot:s110, s170, s230, s280, s330, s390, s460, S550, s660, s780 Steel grit:g120, g80, g40, g40, g25, g20, g18, g16, g14, G12 25kg in plastic bag
Sleeve Spiral bands (abrasive sleeves) are spirally wound single ply of coated abrasive used on expanding rubber drums (rubber mandrels). The unique construction of spiral bands provides smooth, chatter-free operation, thereby giving the operator greater control of the tool. Sleeves are ideal for grinding , blending, deburring, smoothing, finishing and polishing a wide variety of flat and contoured surfaces, including the inside of holes and other hard-to-reach areas. Also effective on hardware with contours or intricate shapes. It can be effectively used on metal, glass & even wooden surfaces 1000 nos
Steel shots High class metallic abrasives sae shots and grits Chemical composition:-c .8-1.2%, mn.8-1.2%, si.5%min, s.05%max, p .05%max Density:-7.4gm/cc, hardness hrc 40-50, .Quality control is ensured through process supported by well equiped laboratory & experienced professionals. Packing=25 kgs bag
Abrasives Brown fused alumina:green silicon carbide Packing size : 25kg/bag
1) Colour : Gryish White 2) Specific Gravity: 2.85 - 2.95 3) Glass Content: 95+3 { 85%(min)} 4) Fineness(m2/Kg) 450+20 (320) 5) Slag Activity Index a) 7 days : 70% (60%(min.) of Control OPC) b) 28 days: 90% (60%(min.) of Control OPC) 6) Soundness a) Le-Chatelier (mm) : 2.0 7) Proportion of use : 20% to 70%
Our Value Proposition We supply the highest quality Garnet mineral that are sourced from our mines, processed in our factories and distributed directly to our end customers. Our customers get the benefit of superior quality of almandine garnet abrasives at a value price as we manage the entire supply chain. Our hyper local supply system enables Just-in-time delivery of Garnet which in turn enables a lean business operation for sandblasting and waterjet cutting industries. Sandblasting Garnet mineral is the best abrasive for the surface preparation of critical infrastructure in Oil & Gas, Marine, and Steel industry. TOKALEV almandine Garnet abrasives enable to attain SA 2.5 finish while lowering the labor cost and abrasive consumption in sandblasting operations. Waterjet cutting Garnet mineral elevates the cutting capability of the machines to precisely cut hard materials. TOKALEV almandine Garnet abrasives contain highly accurate sized grains with no dust that ensures highest productivity and safeguards your machines.
Fused magnesia is prepared by melting selected grade A natural magnesite or high-purity lightly burned magnesium particles in an electric arc furnace. The product has high purity, large crystal grains, compact structure, strong slag resistance and good thermal shock stability. It is an excellent high-temperature electrical insulation material and an important raw material for making high-grade magnesia bricks, magnesia-carbon bricks and unshaped refractories.
White Fused Alumina
Description Industrial Raw Materials are used for buffing, sanding, grinding, or polishing with other products such as Silica Flour, Limestone, Aggregate, Quicklime, Talc, Volcanic Rock and Calcium Carbonate. An abrasive is a material, often a mineral, that is used to shape or finish a workpiece through rubbing which leads to part of the workpiece being worn away by friction. While finishing a material often means polishing it to gain a smooth, reflective surface, the process can also involve roughening as in satin, matte or beaded finishes. As long as the abrasive itself is harder than the material you are trying to finish, an abrasive will be a very effective way of honing down any material to prepare it for use. Industrial Raw Materials Abrasives consist of minerals that can be either naturally-occurring or synthetic, such as calcite, emery, pumice, sandstone, garnet, borazon, ceramic, steel abrasive, and silicon carbide. When used for industrial applications such as mining, construction, railroad, and wholesale/retail operations, usage falls into several different categories: bonded, coated and others. A grinding wheel is a good example of a bonded abrasive, operated at very high speed to finish any material which is pressed against it. Sandpaper is the most commonly used coated abrasive, and is affixed to a backing material, such as paper or metal. While sandblasting a stream of Industrial Raw Materials Abrasives is thrown out on the surface of the workpiece to make it smooth or to remove the contaminants from the surface. Apart from this, these are used in automotive paints. Calcium carbonate is also an Abrasive that is used in toothpaste. In this particular application, hardness of the Abrasive is more than that of the contaminating agent but less than that of the tooth enamel. This helps in removing the bacterial plague without damaging the tooth enamel. Abrasives are also used in the processing of jewelry pieces.
Description Water Treatment Garnet solves a major filtration problem. A properly designed multi-media filter system contains filter media of large grains on top and small grains on the bottom of the filter and provides superior performance even after many backwashings. The solid substances getting into the entire filter bed result in increased solids storage, longer filter runs, and higher filtration rates. This stable condition of large grains above finer one is achieved by the use of filter material of different size and specific gravities. Garnet has a high specific gravity provides a unique filter design. Garnet, in combination with other filter media, provides higher flow rates, higher loading, and better filtration. The high hardness of Garnet reduces attrition and extends the lifetime of the filter bed and provides for years of reliable service. Garnet is an excellent support bed for other high-density media. Garnet is used in sand filters for Water Filtration with other water treatment filtration media products such as Gravel, Anthracite, Silica Sand, Birm, Pumice and Activated Carbon. Our filter garnet is a high hardness, high-density granular filter media. It can be used extremely effectively as the lower layer in a dual media filter system â?? in conjunction with sand, gravel, and occasionally filter coal. With characteristics such as high specific gravity as well as chemical and abrasion resistance, our filter garnet is ideal for water filtration. Garnet Features: Its weight is lighter than the rest of the surrounding rock types in the ground as a whole. Granite grains vary in size from medium to large. The rock contains silica in abundance among its ingredients. One of the most common types of rocks. It is characterized by its very high hardness. It can be relied upon in various construction works, due to its high weathering ability; Therefore, it is used in the construction of temples, palaces, and museums. It differs very beautifully thanks to the combination of colors in its formula. It also has the advantage of being an insulating material, so mica sheets are extracted from it and used in the production of electrical insulation purposes. Very well conductive of heat. It is a very durable rock.
Prpduct Characteristics:Grain is sharp, strong in grinding force, not easy to shed off, manual polishing is efficient and fast Grain: aluminum oxide Grits range: P36-240 Base: Cotton blended Cloth Specification: 230mmx280mm Application: Mainly used for grinding and polishing of metals, ceramics, rubber, wood, semiconductors, leather and glass.The product is characterized by durability and good processing quality.
JB-5 Flexible Abrasive Cloth Roll Characteristics: Flexible backing;Easy to tear; For hand use Grain: Aluminum Oxide Backing: J-wt Cloth Available Grit: 60-600 Max Width(mm): 1400mm Application Mainly use for wood and steel sanding and polishing by hand.
Terbium Gallium Garnet(TGG) as a magneto-optical crystal, is an optimum material for Faraday devices (Rotator and Isolator) in the range from 400nm-1100nm, excluding 470-500nm.The Faraday rotator consists of a TGG rod contained inside a special designed magnet. The rotation sense of the polarization of a light beam passing through the rotator only depends on the direction of the magnetic field and not on the direction of propagation of the light beam. The optical isolator is a Faraday rotator set between two suitably aligned polarizers which allows a light beam to pass through in one direction only.Photonchina TGG has a combination of excellent properties such as large Verdet constant, low light loss, high thermal conductance and high light damage threshold which makes it a unique material for Faraday devices particularly suitable for YAG lasers and Ti: sapphire tunable lasers, ring lasers and seed injected lasers.
Tetrahydrofuran (THF) is an industrial solvent for polyvinyl chloride (PVC) and in varnishes. THF has many uses and as recently been used as co-solvent for lithium metal batteries, helping to stabilize the metal anode. We have access to production orders of THF product, 35-40 days from time of actual order. Please contact for more information.
