550w ps ii single power supply. Solution for ipc, pcs, server, storage system, workstation.
!1 best solution for ipc, server, storage system, workstation, networking, disk array. !1 easy swap of 1u module ( 72 pins golden finger) !1 l x w x h: 227 x 98.5 x 40.1 (mm) / 8.94 x 3.88 x 1.58 (inches)
Colors: red, blue, yellow, gray, green, black, orange, etc. Current: 350a (ac / dc) Voltage: 600v Diameter: various american wire gauge Case material: ul 94 v0 Terminals: copper silver-plated terminals Shrapnel material: stainless steel Certification: ul csa Inner bag, export carton
Input:100-240vac Output:12v 7a 84w Frequency:50/60hz Ac inlet type:c6 c8 c14 Ac cable:europe 2-prong /3-prong cables Ac wire length:1.2m Dc wire length:1.2m Dc wire:2464 18awg Standard unit box (50 units/carton, 43 x 43 x 33 cm/ctn) 2. Retailed gift box (50 units/carton, 43 x 43 x 33 cm/ctn) 3. Retailed blister / clamshell/white box 4. Oem package design
Dimmable constant current led driver for leds application High efficiency, up to 85% Protection: short-circuit with hiccup mode, overload Natural air convection Class ii, no fg Plastic case, ip20 for indoor use only Optional multi-dim function, suitable for led lighting application High current accuracy to make led lifetime longer Functions: 100 to 240v ac switch dim: On/off: short push (50 to 500ms ) on switch Stepless dimming: long push and hold (>500ms) on switch For tuning of light level: with every 2nd long push, light level goes opposite direction Built in with permanent memory Synchronization: no limitation on number of drivers when connected to same switch 1 to 10v dc dim: 1 to 10v dc dimmer and ext pot dimmer Multi-current set: 300, 450, 500, 650 and 700ma select, set dip switch Memory function: power offer memory function to memorize the light intensity, soft light on to memorized intensity, nice to eyes Dim range and effect: 0.3 to 100% stepless dim to make light intensity vary smoothly, no flickering Warranty: 2 years Package size:45.5x39.5x22cm Gross weight:20.0kg Qty:100pcs/carton
Dc12v/16.5a/18 ch Low cost, high reliability International ac input range (110v or 220v) High efficiency, low working temperature Soft-start circuit, limiting ac surge current Short circuit, over load and over voltage protection 100% full load burn-in test Built in emi filter, low ripple & noise Inner 1pc/1 box Outer as order
Model numberOutputTolRcnEffi S-50-55v, 0~10a¡¨¤ 2%75mv71% S-50-1212v, 0~4.2a¡¨¤ 1%100mv78% S-50-1515v, 0~3.4a¡¨¤ 1%100mv78% S-50-2424v, 0~2.1a¡¨¤ 1%100mv82% 30pcs/ ctn . G.W: 19kg 34*33*24
General specifications: Optional case coating (secc/spcc/sgcc) Rated power: 200w Amd and intel p4 atx 12v1.3 version Auto-thermal cooling 8cm fan Male/female connector, i/o switch 20 + 4-pin, 2 sata, 2 hdd, 1fdd Cable length is 400mm 1.2m eu/us power cord Dimensions: 150 x 140 x 86mm Input specifications: Input voltage: 90 to 132, 180 to 264v ac (optional change-over switch) Input frequency range: 50/60hz Leakage current: 3.5ma at 230v/50hz Input current: 10a at 115v.6a at 230v Output specifications: Output power: 200w Maximum power: 300w High efficiency: 72% above Stability mtbf: 100khrs Features: Ocp, scp, ovp, opp, short-circuit protections Low-ripple and noise 100% ate testing 100% burn-in testing Output rise time: 0.1 to 20ms Pg signal rise time 10ms (maximum) Environmental specifications: Operating temperatures: 10 to 50¡ãc Storage temperatures: -40 to 70¡ãc Cable length is 400mm 1.2m eu/us power cord Dimensions: 150 x 140 x 86mm
Features: Compliant with 80 plus standard-efficiency 80%+ Dual switch forward converter design Supports intel core 2 i5 and i7 and amd phenom and athlon cpus Optional for case coating, 24-pin cable shield and pci-e connector Output power: 400w Power: 450w (maximum) Efficiency: 80% at 115/230v ac Ovp, ocp, otp, scp, short-circuit protections Low-ripple and noise 100% ate testing, 100% burn-in testing General specifications: Hold-up time 17ms at maximum load 115v ac/60hz or 230v/50hz Dimensions: 150 x 140 x 86mm Mtbf 100k hours Output rise time: 0.2 to 20 milliseconds Pg signal rise time: 1ms (maximum) Environment specifications: Operating temperatures: 0 to 50¡ãc Storage temperatures: -40 to 70¡ãc Dimensions: 150 x 140 x 86mm Mtbf 100k hours Output rise time: 0.2 to 20 milliseconds
Features: Compliance with 80 plus standard, efficiency 80%+ Support intel core i3, i5, i7, amd phenom and athlon Dual-switch forward converter design m load 115v ac/60hz or 230v/60hz Dimensions: 150 x 140 x 86mm Mtbf: 100k hours Output rise time: 0.2 to 20ms Pg signal rise time: less than 1ms Dimensions: 150 x 140 x 86mm Mtbf: 100k hours Output rise time: 0.2 to 20ms
We are trading in product of power transmission line hardware fittings. Manufacturing/ forged department is our sister concern part that is why we are able to give you best quality and competitive rate. Our product ranges are 33kv to 400kv. But we are able to provide you all hardware as per your requirement (product load, map-size, drawing, etc…) We are able to provide you our entire product with all standard testing and/ or as per your requirement. . Our products size are depend on particular requirement. It is 33kv to 400kv. That is why size is different.
LED Power supply 60W 1 Output power: 60w 2 Output volt:12v/24v 3 Output Currency: 5A/2.5A 4 For all the LED lighting 5 Waterproof class: IP67 6 Certificate: CE, ROHS, SAA, C-TICK. 1 piece in one canton box.
ASTEC DS650-3 (12V output Bulk Front-end) 650W Distributed Front-End Power Features: 1) Active Power Factor Correction 2) EN61000-3-2 Harmonic Compliance 3) Active AC Inrush limiting 4) High Density 5) No Min Load Required 6) Hot Plug Operation 7) N+1 Redundant 8) Internal OR-ing FET's 9) Active Current Share 10) I2C Interface 11) Smart Fan Speed Control Electrical Specifications: Input 1) Leakage Current: 1.4 mA @ 240 VAC 2) EMI/RFI: Class B 3) Effiency: 85% Typ 4) Input Range: 90 - 264 VAC 5) Frequency: 47 - 63 Hz Output 1) Main Output: Refer to Model Selection 2) Protection: OCP/OVP/OTP.
ASTEC DS650-3-002 650W Distributed Front-End Power Features: 1) Active Power Factor Correction 2) EN61000-3-2 Harmonic Compliance 3) Active AC Inrush limiting 4) High Density 5) No Min Load Required 6) Hot Plug Operation 7) N+1 Redundant 8) Internal OR-ing FET's 9) Active Current Share 10) I2C Interface 11) Smart Fan Speed Control Electrical Specifications: Input 1) Leakage Current: 1.4 mA @ 240 VAC 2) EMI/RFI: Class B 3) Effiency: 85% Typ 4) Input Range: 90 - 264 VAC 5) Frequency: 47 - 63 Hz Output 1) Main Output: Refer to Model Selection 2) Protection: OCP/OVP/OTP.
Specification: 1. Part No: MSD-24V-80W 2. Input voltage:170Vac-265Vac 3. Output constant voltage: 24V 4. Current :3.3A 5. Size:187*69*43mm 6. Weight:1080g/pc 7. CE & RoHS.
Model:TPD-03402 Description: 12V/5V-2A dual voltage output for DVR power supply Input Condition : 100 to 240VAC 50/60 Hz 1.0A Max Input Rated Voltage : 100 to 240VAC Input Voltage Range : 90 to 264VAC Input Rated Frequency : 50/60Hz Input Frequency Range : 47Hz to 63Hz Input Current : 1.0A Max Input Inrush Current : 30A Max Input No Load Power Consumption : 0.5W Max At 115Vac/230Vac Efficiency : 80% Min Rated Output Power: 34W Output Voltage & Current : 12V/5V-2A Dual voltage Output Line Regulation : 1% Output Load Regulation : 5% Output Over Shoot : 10% Max Output Ripple And Noise : 1% Max Output Rising Time : 20ms Max At 115Vac Output Hold up Time : 8ms Min At 230Vac Protection : OCP OVP SCP OPP Dielectric Withstand Voltage : 3KV 5mA 60s Leakage Current : 0.25 mA At 230Vac Operating Temperature: 0 to 70 Storage Temperature: -10 to 85 Relative Humidity: 5 to 95%.
Model:TPD-04501 Description: OEM Nintendo Wii AC/DC Adapter,Swicthing Power Supply Input Condition : 100 to 240VAC 50/60 Hz 1.2A Max Input Rated Voltage : 100 to 240VAC Input Voltage Range : 90 to 264VAC Input Rated Frequency : 50/60Hz Input Frequency Range : 47Hz to 63Hz Input Current : 1.2A Max Input Inrush Current : 30A Max Input No Load Power Consumption : 0.5W Max At 115Vac/230Vac Efficiency : 85% Min Rated Output Power: 45W Output Voltage & Current : 12VDC / 3.7A Output Load Regulation : 5% Protection : OCP OVP SCP OPP Dielectric Withstand Voltage : 3KV 5mA 60s Leakage Current : 0.25 mA At 230Vac Operating Temperature: 0 to 70 Storage Temperature: -10 to 85 Relative Humidity: 20 to 80%.
Output Type: single output Input Voltage (V): 90VAC~132VAC/180VAC~264VAC (by switch) Input Current (A): 4.5A Max Efficiency: 75% Typ (230VACFull Load) Output Voltage (V): +48Vdc Output Current (A): 4.4A Rated Power (W): 211.2W Ripple/Noise (mVp-p): 150mVp-p Working Temperature (): -20 - +50 (refer derating curve) Withstand voltage(VAC):I/P-O/P:3KVAC,I/P-FG:1.5KVAC,OP-FG:0.5KVAC 1min Safety Standard: EN/UL60950-1,GB4943 EMC Standard: EN55022 Class B,EN61000-4-2,3,4,5,6,8,11 GB17626.5 Level3 Over voltage Protection: >115%-135% Rated output voltage Over Current Protection: N/A Over load Protection: >105%-150% hiccup mode,Auto recovery Short circuit Protection: Latched Over Temperature Protection: Auto reboot MTBF: 250K hrs 25 DimensionL*W*H(mm): 215*115*50mm Weightg/pcs: 680g/pcs.
80plus+ CE Certificate, 7*SATA, 3*4pin HD, 1*20+4pin, 1*FDD, 12cm or 14cm FAN, 1*PCIex 6pin, 1*PCIex 6+2pin, APFC, 1*P4, 1*8pin, I/O Switch. OEM packaging.
1, Input: 100 to 240V AC, 50/60Hz 2, Output power: 24W series 3, Output voltage: 3 to 24V DC 4, Output current: 10 to 4,000mA 5, Overload protection 6, Output over voltage protection 7, Short circuit protection 8, High efficiency Mini 75 % 9, DC socket (optional) 10, CEC power supply standard 11, CE approved 12, No Load Power Consumption ¡Ü 0.3 W at Rated Voltage 13, Ripple And Noise: Output voltage 1% 14, High-Voltage test : Primary to secondary: 3 kV 5 mA 60 S 15, Leakage Current : 0.5 mA (max) at input 240Vac 16, Operating Temperature Range 0--40¡æ 17, Storage Temperature Range: -20 --- 85¡æ 18, High Humidity Operation :+ 40 ¡æ and 90 ¡« 95% Humidity 19, Dimension : 74.0mm*41.0mm*47.5mm 20, Net weight: About 170 gram per unit. 21, Color : Black / White 22, The power adapter should have 50,000 hours according to MTBF. 23, Insulation Resistance:Primary to Secondary : 50 Meg. Ohms min. 500VDC. Customized.
