Copper Tubes For Automobile Industries : The industrial copper tubes and copper pipes that we manufacture for the automobile industry has certain advantages over other metals. Copper had been proved since the early days to have many good attributes. It is easy to bend and has very high corrosion resistance. Copper''s inherent superiority in thermal conductivity, corrosion resistance and strength has made it a preferred primary metal for radiators since the dawn of cars and trucks. Now, with new technologies, it can be used to make smaller, lighter and stronger copper radiators. These radiators will be far more environmentally friendly because they are lead free and easier and cleaner to produce.
Copper Tubes For Heating Application & Solar Panels : The copper tube we manufacture finds numerous applications in Heating and Solar Panels. For steam-heating systems, especially return lines, the outstanding corrosion resistance and non-rusting characteristics of copper tube assure trouble-free service and maintenance of traps, valves and other devices.
Copper Tubes For Heat Exchangers & Locomotives : We recommend our copper tube for heat exchangers and condensers because copper''s inherent superiority in thermal conductivity, corrosion resistance and strength has made it a preferred primary metal for Heat exchangers(radiators) and condensers since the dawn of cars and trucks.
Copper Bus Tubes For Electrical Application : As per B.S. 2871 Part - 2/72 C 101 Near Equivalent specification B.S. 1977/ 63 & (ASTM B - 188-81) Uses Copper tube used for gas, heater and hydraulic lines, oil burners, refrigerators, evaporators and heat exchangers. Hollow (round, square, rectangular and elliptical) electrical conductors in high voltage installation, induction furnaces etc
Copper Tubes For General Engineering : Copper Tubes, manufactured by us, can also be used for general engineering. In residential buildings and small one and two-storey commercial buildings, the drainage piping is usually straightforward in design and simple in installation. Type DWV copper tube, installed with good workmanship by an experienced plumber, will provide many years of trouble-free service. Copper DWV tube has been used successfully for years in all parts of drainage plumbing systems for high-rise buildings for soil and vent stacks and for soil, waste and vent branches. Copper tube''s lightweight and the ease with which it can be prefabricated have been especially important in high-rise drainage systems.
Copper Tubes For Water And Gas : Copper Tube to BS EN 1057 - R250 (Previous Designation BS 2871: Part 1: Table X) Half Hard Straight. This products is supplied in 3 or 6 meter straight lengths in the half hard condition, an ideal temper for cold bending and forming. ABC Tubes can be easily bent on an appropriate bending machine for 6 to 22mm O.D. sizes, with a bending spring. Its ease of manipulating and relatively light weight, combine with its ability to withstand high internal pressure makes Mex-flow the ideal products for most hot and cold water, central heating and gas services installations. This is the general-purpose copper tube for above ground services. Ideal for Drinking Water, Central Heating, Sanitation, Hot and Cold Water, industrial Medical Gas Transportation and Various Engineering.
Copper Tubes (Air Conditioning Systems And Refrigeration Systems) : The Copper tubes that we manufacture are extensively used in Air conditioning systems. The use of copper tube in air-conditioning and refrigeration systems has grown steadily in recent years. This is in large measure due to the inherent properties of the copper metals and their unique abilities to meet the needs of the ACR industry. Stringent new requirements, including demands for increased operating efficiency and the reduction or elimination of harmful emissions, have led to a new appreciation for copper tubes role in product enhancement.
Copper water tube Copper water tube
HFW Solid Finned Tube, High Frequency Welded Solid Finned Pipe HFW Solid Finned Tube, High Frequency Welded Solid Finned Pipe HFW Solid Finned Tube, High Frequency Welded Solid Finned Pipe HFW Solid Finned Tube, High Frequency Welded Solid Finned Pipe
C27200, c27000 etc. 4) chemical composition:cu >99.90% p:0.015%-0.040% 5) temper: o, 1/4h, 1/2h, h O : hv100 6) electric 20℃conductivity:c1100 >97% ;c12200 >80% Applications of copper tube (copper pipe): 1) natural gas, liquefied petroleum (lp)gas 2) hvac, snow melting, drain, waste, vent piping 3) re-drawing usage 4) high conductivity use 5) cable lugs and termainals 6) electric connectors 7)lighting industry 8) air conditioner and refrigerator 9) water tube service and distribution 10) fire protection, solar, fuel/fuel oil
Copper tubes of various diameters from 4 to 80 mm with wall thickness from 0.35 to 2.5 mm. Soft (r220), half-hard (r250) and hard (r290) conditions annealed and not annealed. Packaging as per standards and as per request. Correspond to the requirements of gost 317, gost 21646, gost 11383, astm b 280, astm b68, en 1057. As per diameters packed in coils and straight cut on wooden pallets and wooden boxes.
Insulated copper tube is for air conditioner installation. The copper tube inside of insulation is compatible for r410a, r407c, r404a, r507 and r22 refrigerants. The copper tube are produced according to astm b280 standard, en 12735-1 standard, as 1571 standard. The outer insulation tube is three layered structure and made of cross linked pe foam with closed cells. Insulation tubes are covered with embossed pe film to prevent the foam creasing. Our insulated copper tube is with rohs certificate, ce certificate and produced in iso 9001 management system. The types of insulated copper tube are twin insulated copper tube, single insulated copper tube. Advantage: 1. Rohs certificate, ce certificate and iso 9001 management system assure superior quality 2. Professional copper tube manufacturer, fast production and delivery 3. 12 years copper tube manufacturing experience, meticulous care on every order 4. Pe insulation tube is environmental, anti-uv, with excellent heat resistance, lower water absorption 5. Company standard copper tube especially for r410a refrigerant Specifications: 1. Alloy: c12200, cu-dhp, 2. Size range: Coc Carton.
Acr copper tube is used for air conditioner, central air conditioning and refrigeration purpose. The production standard for acr copper tube are astm b280 standard, en 12735-1 standard and as 1571 standard. Our acr copper tube is with rohs certificate, ce certificate and produced in iso 9001 management system. The acr copper tube each end capped or plugged with yellow cap or blue plug to keep dry and clean inside. Blue code marking for straight acr copper tube to identify its acr usage. Advantage: 1. Rohs certificate, ce certificate and iso 9001 management system assure superior quality 2. Professional copper tube manufacturer, fast production and delivery 3. 12 years copper tube manufacturing experience, meticulous care on every order Specifications: 1. Alloy: c12200, cu-dhp, c1220, tp2 2. Size range: Outside diamete Wall thickness from 0.25mm to 4.0mm Wooden case.
SB 75, Copper tube, C10200, 19.05MM X 1.65MM Plywood case
We select only the best products from our domestic manufactures to export to over 10 countries worldwide including US, Australia, Canada and Japan. At this point, we are seeking reliable distributors/business partners in Canada. We've been exporting to the top manufactures and distributors in the aforementioned countries and the relationships with our long-term business partners have proved our commitment to superior quality of the products and services. It can be also custom made.
Copper tube 1) Diameter: 12~38mm 2) Length: 6 meters, customers specifications are available 3) Wall thickness: 0.5mm ~ 1.5mm 4) Application: heat exchangers, radiators, coolers, electro-heat-up pipes, air conditioners and refrigerators, oil transportation, brake pipes, water pipes and gas pipes for construction. Depend on customer's requirements.
Copper tubes
Copper tubes Wood packaging
Product Description Copper Tube (ACR Straight Tube) is mainly used for Air Conditioning and Refrigeration. We can produce the Copper Tube (ACR Straight Tube) according to ASTM B280, ASTM B68, EN 12735 standard, AS 1571 standard and JIS H3300 standard. The Copper Tube (ACR Straight Tube) we produce is also with R410 A rated quality. Product Feature Generally supplied with lengths of 10ft, 12ft, 20ft and 3 meters, 5 meters, 5.8 meters and 6.0 meters as per ASTM, EN (BS), AS/NZS, and JIS standard. Shorter lengths are available to suit special requirements. Copper Tube (ACR Straight Tube) is usually supplied in the hard drawn and half hard temper, annealed temper is also available if requested. Product Specification / Models Outside Diameter: from 3/16 inch to 4-1/8 inch (British system), or from 4mm to 108mm (Metric system) Wall Thickness: from 0.012 inch to 0.158 inch (British system), or from 0.30mm to 4mm (Metric system) Application ISO 9001 Other Information Supply Ability: 1,000MT/month Wooden Box
Excellent performance Cost effective High degree of purity Available in different sizes Biostatic in nature
