High quality Alkyl Dimthyl Amine Oxide 30% CAS 70592-80-2 Alkyl Dimthyl Amine Oxide 1. It is fatty tertiary amine oxide, in acid medium was cationic, and in alkaline medium was nonionic. 2. It has excellent thickening, antistatic, soft, decontamination and Increasingfoam performance. 3. For low irritant performance, which not only can effectively reduce the anionic detergent irritant, but also has a bactericidal, Ca-soap dispersion, vulnerability to biological degradation and so on.
Saline AHB1324 (0.9% Sodium Chloride) - US BAXTER HEALTH IV Bag of 0.9% Sodium Chloride (Normal Saline Solution) Injection Available in 50mL, 100mL, 250mL, 500mL, 1000mL New, Sterile, Sealed, & Medical Grade No Prescription Required!
Diphenylmethane diisocyanate, or "MDI" for short, is a white to pale yellow molten solid, containing 4,4 '-diphenylmethane diisocyanate, 2,4' -diphenylmethane diisocyanate, 2,2 '-diphenylmethane diisocyanate, and other isomers. Is the aromatics downstream main products, widely used in polyurethane elastomers, synthetic fiber, artificial leather, solvent-free coatings and other polyurethane materials production field.
Anionic polyacrylamide series products are water-soluble linear polymers with high degree of polymerization.2.They are easily soluble in water and almost insoluble in common organic solvents such as benzene, ether, lipids and acetone.3.It combines valuable properties such as flocculant, thickening, shearing ,resistancereducing, dispersive
This product is a non-ionic high efficiency thickener and a naturally derived glucoside product. It is very mild and non-irritating; it has excellent thickening property and is an extremely efficient thickener for surfactant system formulations; it has good compatibility with various surfactant systems and does not reduce the foam height; it has excellent synergy, and has a good compounding and thickening effect with AOS, AES sodium salt, sulfosuccinate salt and amphoteric surfactant, without jelly feeling. It is very suitable for cleaning products, such as hair shampoo, body wash, facial cleansing products, baby shampoo and so on.
INCI: Alkyl Acrylate Crosspolymer Carbomer Carbopol N2 Description: Multi-functional emulsifier, capable of stabilizing and thickening emulsions even at low dosage, Cold process, No need to calculate the HLB value. It can emulsify silicone to create semi-transparent cream. Provides moisturizing and weightless sensory for cream. High viscosity formulation: THEMAX N1 Low viscosity formulation: THEMAX N2 Recommend Dosage: 0.1-0.4% Features: Emulsify a variety of oils and grease Excellent emulsion stability Suitable for a cold mix process
Ortho Xylene also referred to as O-Xylene is an aromatic hydrocarbon and its formula is C6H4(CH3)2. It is one of the constituents of the three isomers of xylene, namely p-xylene and m-xylene. Concentration: 99 - 100% Physical State: Liquid Odor: Aromatic Appearance Colorless
Factory price 98% 99% Mixed xylene for Industrial and Agriculture Grade C8H10 CAS 1330-20-7 CAS No.: 1330-20-7 Chemical Formula: CH Description: Xylene is a colorless, transparent liquid with a pungent, characteristic odor. It is a flammable substance that can easily mix with ethanol, ether, and various other organic solvents, but is insoluble in water. Xylene is composed of three isomers: 45% to 70% m-xylene, 15% to 25% p-xylene, and 10% to 15% o-xylene. It has a boiling point range of 137140C and is commonly used in the production of petrochemicals, paints, coatings, and solvents. Specifications: CH Content: Grade I: 99% min Grade II: 99% min Chroma: Grade I: 10 max Grade II: 20 max Evaporation Residue: Grade I: 0.001% max Grade II: 0.002% max Acidity (mmol/g): Grade I: 0.00025 Grade II: 0.0005 Alkali (mmol/g): Grade I: 0.00025 Grade II: 0.0005 Sulfur (S) Content: Grade I: 0.003% max Grade II: 0.005% max Benzene Content: Grade I: 0.1% max Grade II: 0.2% max Toluene Content: Grade I: 0.1% max Grade II: 0.5% max Ethylbenzene Content: Grade I: 19% max Grade II: 24% max Water Content (Hâ??O): Grade I: 0.03% max Grade II: 0.06% max
Melamine Cyanurate used for V-0 grade nylon(PA66 and PA6) and glass fiber reinforced nylon flame retardancy Category: Flame Retardant Powder Tags: Film Grade, Masterbatch, Polyester Chips, Textile Grade Classification: Inorganic Flame Retardant CAS No.: 68333-79-9 Product Description: Melamine Cyanurate (MC) is a halogen-free flame retardant commonly used in unfilled polyamide (PA) products. It provides exceptional flame retardancy, achieving the UL 94 V0 flame retardant rating in materials such as nylon PA66 and PA6. MC is recognized for its unique crystal structure and excellent dispersibility, making it highly suitable for various polymer applications. Key Applications: Flame Retardancy: PA6, PA66 (nylon) PBT, PET TPE, EVA, PE Silicone Rubber, Epoxy Resin Rubber Products MC is an effective solution for enhancing the flame retardant properties of these materials, ensuring both safety and performance in a wide range of industrial applications.
Product Name: Diethylene Glycol (DEG) CAS No.: 111-46-6 Molecular Formula: CHO Molecular Weight: 106.12 g/mol EINECS No.: 203-872-2 Physical Properties: Melting Point: 10C (lit.) Boiling Point: 245C (lit.) Density: 1.118 g/mL at 25C (lit.) Appearance: Colorless liquid Purity: 99% Applications: Diethylene Glycol (DEG) is widely used in the manufacturing of plasticizers and serves as a key component in various industrial applications, including: Extractant Desiccant Insulation agent Softener Solvent
High Quality Mono Ethylene Glycol /Ethylene Glycol Price CAS 107-21-1 Molecular Formula: CHO Density: About 1.11 g/cm Boiling Point: 197 C Melting Point: -13 C Purity: Typically >99.5% for industrial applications
Ethylene Glycol is an important organic compound with the chemical formula CHO, commonly known as ethane-1,2-diol. It is a colorless, odorless, and sweet-tasting viscous liquid. Due to its unique properties, ethylene glycol is widely utilized across various industries. Key Properties: Boiling Point: Approximately 197.3 C (388.1 F) Melting Point: -12.9 C (8.8 F) Density: About 1.11 g/cm
Naphthalene Dicarboxylate (NDC) Naphthalene Dicarboxylate (NDC) is a specialized chemical compound utilized primarily in the production of advanced polyesters and resins. It plays a crucial role in manufacturing high-performance items such as: LCD Flat Panel Displays: NDC enhances the properties of materials used in screens, contributing to better display quality and durability. Ultra-Thin Data Storage Tapes: The compound is key in producing data storage solutions that require thin, flexible materials without compromising performance. NDC is part of IVL's High-Value Added (HVA) product portfolio, highlighting its importance in innovative applications across various industries, including electronics and data storage.
Purified Terephthalic Acid (PTA) Purified Terephthalic Acid (PTA) is a key organic compound formed through the reaction of paraxylene (PX), a secondary petroleum product, with acetic acid. PTA is primarily used in the production of Polyethylene Terephthalate (PET), a widely utilized polyester. During polymerization, PTA is combined with other chemicals to produce PET, which appears as a white crystalline powder. Key Characteristics: Safety: PTA is considered to be non-toxic and is classified as flammable, with the potential to ignite in the presence of sufficient air. Applications: As a crucial organic raw material, PTA finds extensive use in various industries, including: Chemical Fiber Industry: Essential for producing synthetic fibers. Light Industry: Used in a variety of consumer products. Electronics Industry: Integral in the manufacturing of electronic components. Construction Industry: Utilized in various construction materials and applications.
Paraxylene (PX) is an important aromatic hydrocarbon with various industrial applications, primarily in the production of purified terephthalic acid (PTA), which is a key precursor for polyester fibers and polyethylene terephthalate (PET). Here are some of its notable properties and uses: Properties of Paraxylene: Melting Point: 12-13 C Boiling Point: 138 C Density: 0.861 g/mL at 20 C Vapor Density: 3.7 (compared to air) Vapor Pressure: 9 mm Hg at 20 C Refractive Index: n20/D 1.495 Flash Point: 77 F Storage Temperature: Recommended at +5C to +30C Solubility: Slightly soluble in water (0.2 g/L) Appearance: Colorless liquid pKa: >15. Applications: PTA Production: Approximately 65% of PTA produced is used to manufacture polyester fibers, which are widely used in clothing and textiles. PET Bottles: About 30% of PTA is converted into PET, commonly used for beverage bottles and packaging. Plastic Products: The remaining 5% is utilized in various plastic products, including films and food containers
Zinc chloride is used as a soldering flux, catalyst, dehydrating and condensing agent, battery electrolyte, and metal etchant. It is used as a glazing flux in glassblowing and in glass etching, mordant in dyeing and printing, sizing and weighting fabrics, mercerizing cotton, and carbonizing woolen products. It is utilized in conserving anatomical samples, embalming products, wood preservative and deodorants. It is also employed in organic synthesis. Sales Specification Assay: 97.00% Min Appearance: White Iron(Fe): 10 ppm Max Lead (Pb): 10 ppm Max Zinc Oxide: 1.50% Max Sulfate: 0.015% Max Packing 55.12 Lb bag, 40 bags per pallet DOT Transportation UN No: 2331 Proper Shipping Name: Zinc Chloride, anhydrous Hazard Class: 8 Packing Group: III
Zinc Carbonate USP is used in rubber and plastic products (fire-proofing filler), cosmetics and lotions, pigments, porcelain and pottery, astringents and topical antiseptics, and animal feeds; Its used as a sulfide scavenger in mud's and to make pharmaceuticals (ointments and dusting powders);USP, or United States Pharmacopeia, grade chemicals comply with the standards of the United States Pharmacopeia and National Formulary (USP-NF). USP Grade chemicals are fit for use in food, drugs, and medicines. They are subject to stringent testing and are typically required to have the highest level of purity. Specifications Appearance: White As Zn (Dry basis): 55% Min Lead (Pb): 500 ppm Max Cadmium (Cd): 20 ppm Max Arsenic (As): 500 ppm Max pH: Around 9 SO4 2- : 0.80% Max Moisture 105�°C/2hr: 3.50% Max Sieve Pass (230 mesh): 99.50% Min Packing 55.115 Lb bag, 40 bags per pallet
Xylitol FCC is mainly used as a bulk sweetener and food additive, mainly in noncariogenic confectionery and oral hygiene preparations (toothpaste and mouthwash), and less frequently in dietetic foods (food products for diabetics), preparations (tablets, throat lozenges, multivitamin tablets, cough syrup), and solutions for parenteral nutrition. Sales Specification Appearance: White crystal or crystalline powder Xylitol Assay: 99.5% Min Loss Drying: 0.5% Max Residue after Burning: 0.05% Max Reducing Sugar Glucose: 0.1% Max Other Polyhydric Alcohols: 0.2% Max Heavy Metal (Pb): 5 ppm Max Arsenic: 2 ppm Max Nickel: 2 ppm Max Lead: 1 ppm Max Chlorides: 0.01% Max Sulfates: 0.01% Max Melting Point: 92 ~ 96C PH: 5.0 ~ 7.0 Quality Standard: USP24 and FCC IV Packing 55.12 Lb bag
Trisodium Phosphate Dodecahydrate is used as a cleaning agent, a lubricant, a stain remover, and a degreaser. TSP is used in water softener, photography, detergent, boiler detergents, leather degreaser agent, degumming agent, meal cleaning agent and analytical reagent. It works as PH buffers of the adhesive for producing glossy paper, the fixing agent for textile printing, mercerized enhancer for fabric, tendering resistant agent for making thread in the chemical, textile printing paper dyeing, power generation and other industries. It can be used for chemical degreasing and decontamination, and can also be used as the metal corrosion resistance agent or rust inhibitor in metallurgical industry; fluxing agent and bleaching agent in enamel industry; degreasing agents and rawhide unglued agent in leather industry; tooth cleaners; coagulating agent for rubber latex; juice purification agents. Physical And Chemical Properties Physical State: White crystal Melting Point: 75C Specific Gravity: 1.62 Solubility in Water: Soluble PH: 11.5-12.2 (1% sol) NFPA Ratings: Health: 3; Flammability: 0; Reactivity: 0 Stability: Stable under ordinary conditions Sales Specification TSP Content (Na3PO412H2O)%: 98.0 Sulfate (as SO42-): 0.5 Water Insoluble: 0.10 Chloride (as Cl-): 0.40 pH value: 11.5~12.5 Ferrum (Fe): 0.015 Packing 50 Lb bag, 44bags per pallet
Trisodium Phosphate Anhydrous Granular FCC is mainly used as a buffering agent, emulsifying agent, anti-caking agent, antioxidant and nutritional supplement in the food industry. It is used in food products like smoothie and beverages .It has many industrial applications as well, it's used in water processing, as a washing agent and in detergent, Textile and leather agent, Ceramic, Enamel, Colors, Photographic developers; removing boiler scale; water softer; wet finishing ph value adjustment; aluminum polishing, burnishing; sugar refining; complementary feeding stuff ; cleaning compound. Sales Specifications pH (1% sol): 11.5 -12.5 Bulk Density, gm/cc: 0.80 Min. Water Insoluble, %: 0.1 Max. Loss on Ignition (Dry at 110 for 5 hr then ignite at 800�°C for 30 min), %: 2.0 Max Phosphate as (P2O5), %: 42.0 - 43.5 Assay, %: 97.0 Min Particle Size Distribution: Retained on 20 mesh (850 �µm), %: 20.0 Max Passed thru 100 mesh (150 µm), %: 35.0 Max. Parameter Fluoride as F, ppm: 10.0 Max. Arsenic as As, ppm: 3.0 Max. Lead as Pb, ppm: 3.0 Max. Cadmium as Cd, ppm: 1.0 Max. Mercury as Hg, ppm: 1.0 Max. Packing 55.12 Lb Bag, 40 bags per pallet
