Details as follows : Rotational-speed range : 20 . 7000 rpm Permanent ambient temperature in the cable area : -40 to + 120C Permanent ambient temperature in the coil area : -40 to + 150C Winding resistance at 20 C 860 : 10 % Inductance at 1 kHz 370mH : 15 % Degree of protection : IP67 Output voltage : 0.200V
Electrical : Output: Analogue or digital Typical Linearity: 2.5% (absolute) 1.0% (independent linearity) Typical Travel: 15mm electrical* / 18mm mechanical* (*application dependent, adaptable to larger or smaller travel requirements) Nominal Index Voltage : Programmable Electrical Limit Maximum : 20 VDC Supply Voltage : 4.5 - 5.5 VDC Typical Current Draw : 12 mA (dependent on program conditions) Maximum Response Time : 600 S Durability : Typical Vibration: 200 hrs.; 3 planes; 20 - 2000 Hz; 40G RMS;-40C -160C. Typical Thermal Shock: 500 cycles, -40C and 160C; 15 sec. transition; 30 min. soak at each temperature Typical Temperature Range: -40C > 160C
Parameter specification : 1 switching capability 10 w (max) 2 switching voltage 100 vdc (max) 3 switching current 0.5 amps (max) 4 contact resistance 1 ohms max 5 dielectric : between terminals 200vdc for 1minute between body & terminal 500vdc for 1minute body & cable insulation 500vdc for 1minute 6 must operating distance 7- 14 mm with tvsc magnet tvsc-mfax-01 7 must release distance 10-25 mm with tvsc magnet tvsc-mfax-01 8 operating temperature 80 deg c max 9 surface temperature 5 deg c max @ ambient 10 ambient temperature -20 to +50 deg c x denotes for high temperature (50 deg c ) 11 IP rating ip 67. 12 sensor dimension 35x19x10 mm 13 Cable 2 core cable with shield 14 Approvals : CE & Atex.
1.Wide operating temperature range: -40 to +300íµ 2.Dielectric strength: 1, 500v ac for one second 3.Short thermal response time in water, high stability in moisture 4.Suitable for use in high-temperature and moisture environments 5.High accuracy, small dimensions, different tolerancr available , cost-effective 6.Ul approval , rohs compliant 7.Climatic category:iec60068-1 8.Resistance tolerance ú¦ía1%í½ía10% 9.Insulation resistance: í²100mª+ 10.Dissipation constant:min. 3mw/íµú¿still airú¬ 11.Thermal time constant : 8 seconds max (still air) 12.Thermal time constant : 2 seconds max (stirred liquid) 13.Moisture resistance:(40íµ 95% rh)1000 hours R valueú¦10k-5000k B valueú¦3435, 3950, 3977, 3899, , 4050, 4020 etc. Precisionú¦+/-1%--+/-10%
1.Wide operating temperature range: -20 to +300íµ 2.Dielectric strength: 1, 500v ac for one second 3.Short thermal response time in water, high stability in moisture 4.Suitable for use in high-temperature and moisture environments 5.High accuracy, small dimensions, different tolerancr available , cost-effective 6.Ul approval , rohs compliant 7.Customized specifications are welcome 8.Climatic category:iec60068-1 9.Max power:at 25íµ=50mw 10.Resistance tolerance ú¦ía1%í½ía10% 11.Insulation resistance: í²100mª+ 12.Dissipation constant:min. 3mw/íµú¿still airú¬ 13.Thermal time constant : 30 seconds max (still air) 14.Moisture resistance:(40íµ 95% rh)1000 hours
1.Wide operating temperature range: -40 to +250íµ 2.Dielectric strength: 1, 500v ac for one second 3.Short thermal response time in water, high stability in moisture 4.Suitable for use in low and high-temperature and moisture environments 5.High accuracy, different tolerancr available , cost-effective 6.Ul approval , rohs compliant 7.Customized specifications are welcome 8.Climatic category:iec60068-1 9.Resistance tolerance ú¦ía1%í½ía10% 10.Insulation resistance: í²100mª+ 11.Dissipation constant:min. 3mw/íµú¿in airú¬ 12.Thermal time constant :20seconds max ( in water ) 13.Moisture resistance:(40íµ 95% rh)1000 hours
1.Fast response , high sensitive. 2.Glass sealing, able to stand for low temperature 3.Coaxial structure makes it easy to install and can stand for high temperature R value :10k--5000k B value :3950, 3899, 4020, 4050, 4200, etc. Precisionú¦+/-1%--+/-10%.
1.Wide operating temperature range: -20 to +300íµ 2.Dielectric strength: 1, 500v ac for one second 3.Short thermal response time in water, high stability in moisture 4.Suitable for use in high-temperature and moisture environments 5.High accuracy, different tolerancr available , cost-effective 6.Ul approval , rohs compliant 7.Customized specifications are welcome 8.Climatic category:iec60068-1 9.Max power:at 25íµ=350mw 10.Resistance tolerance ú¦ía1%í½ía10% 11.Insulation resistance: í²100mª+ 12.Dissipation constant: min.3mw/íµú¿still airú¬ 13.Thermal time constant : 15 seconds max (still air) 14.Moisture resistance:(40íµ 95% rh)1000 hours
1.Wide operating temperature range: -20 to +125íµ 2.Dielectric strength: 1, 500v ac for one second 3.Suitable for use in low and high-temperature and moisture environments 4.High accuracy, different tolerancr available , cost-effective 5.Ul approval , rohs compliant 6.Customized specifications are welcome 7.Climatic category:iec60068-1 8.Max power:at 25íµ=60mw 9.Resistance tolerance ú¦ía1%í½ía10% 10.Insulation resistance: í²100mª+ 11.Dissipation constant:min. 3mw/íµú¿still airú¬ 12.Thermal time constant : 20 seconds max (still air) 13.Moisture resistance:(40íµ 95% rh)1000 hours
1.Wide operating temperature range: -20 to +150íµ 2.Dielectric strength: 1, 500v ac for one second 3.Short thermal response time in water, high stability in moisture 4.Suitable for use in low and high-temperature and moisture environments 5.High accuracy, different tolerancr available , cost-effective 6.Ul approval , rohs compliant 7.Customized specifications are welcome 8.Climatic category:iec60068-1 9.Resistance tolerance ú¦ía1%í½ía10% 10.Insulation resistance: í²100mª+ 11.Dissipation constant:min. 2mw/íµú¿in airú¬ 12.Thermal time constant : 3seconds max ( in water ) 13.Moisture resistance:(40íµ 95% rh)1000 hours.
1.Wide operating temperature range: -20 to +200íµ 2.Dielectric strength: 1, 500v ac for one second 3.Short thermal response time in water, high stability in moisture 4.Suitable for use in low and high-temperature and moisture environments 5.High accuracy, different tolerancr available , cost-effective 6.Ul approval , rohs compliant 7.Customized specifications are welcome 8.Climatic category:iec60068-1 9.Resistance tolerance ú¦ía1%í½ía10% 10.Insulation resistance: í²100mª+ 11.Dissipation constant:min. 2mw/íµú¿in airú¬ 12.Thermal time constant : 12seconds max ( in water ) 13.Moisture resistance:(40íµ 95% rh)1000 hours.
1.Wide operating temperature range: -20 to +105íµ 2.Dielectric strength: 1, 500v ac for one second 3.Short thermal response time in water, high stability in moisture 4.Suitable for use in low and high-temperature and moisture environments 5.High accuracy, different tolerancr available , cost-effective 6.Ul approval , rohs compliant 7.Customized specifications are welcome 8.Climatic category:iec60068-1 9.Resistance tolerance ú¦ía1%í½ía10% 10.Insulation resistance: í²100mª+ 11.Dissipation constant:min. 5mw/íµú¿in airú¬ 12.Thermal time constant :85seconds max ( in water ) 13.Moisture resistance:(40íµ 95% rh)1000 hours
Visible light sensor IC Rohs compliant Replacement of cds The gb5a series is a low cost visible light sensor, with a Current output which is directly proportional to the light Level. It has a built in optical filter to provide a Response which is close to the human eye, or f¼photopicf¼. The output current can be converted to a voltage by Connecting it in series with a resistor. The dynamic range Is determined by the external resistor and power supply (10k and 5v gives a range of 0 up to 250 lux, but this can Be over 900 lux with a 1k resistor). The internal dark Current cancellation enables high accuracy over the full Temperature range, even at low light levels. Features Near human eye photopic response High ir rejection +c integrated optical filter Current output highly linear vs light level Temperature stable Integrated high gain photocurrent amplifier Darkcurrent cancellation Applications Dawn/dusk sensing Night view surveillance camera Display backlighting in laptops, mobile phones, lcd tvs Nightlights . Moq 1, 000pcs
Application: for hydrogen detection; Suitable for people who working in hydrogen environment to improve safety and reliability; With PID light the system is good for all day-long use Power Supply: one 9 Volts Battery Response time: < 3s Recovering Time: 1% Working temperature: 0 íµ - 90 íµ Dimensions: 58 mm 48 mm 113 mm.
Description: Nellcor DS-100A Finger Clip Spo2 Sensor, L=1m or 3m Connector Guide: DB9- 7 pins Compatibility: Nellcor All types, N40, N100, N290/5, N390, N3000, N6000.
Bag filters are used for removal of solids from liquids. Depending on pressure, flow, viscosity, nature of liquid, we can design and manufacture a suitable liquid bag filter. The housing of the filter can be Mild Steel, Stainless Steel, FRVE or any other.i
Product name2.5 inches rear view system with parking sensors Suitable for car /suv Price 2.1pcs 1/4 cmos camera (ov7950) 3. 4 pcs parking sensors (four color optional" black, red, white and silver") 4.1 pcs control box 5. Accessories Features1. Display picture and distance behind vechile and sound alarm distance 2. Automatic start when back up 3. 4 sensors without invisible area 4. Wide visiable area from camera 5. Night vision and waterproof camera 6. Six sensors could be select two for front four for back Packages1pc/color box (24*8*35cm) 10pcs /master carton (42.2x36.2x49.8cm)
Ink level sensor
As per PN and Model Standard lot size
Technical Parameter: Rated load: 10,15,20,25,30,40,50t Sensitivity: 2.0+/- 0.002mV/V Total error: C3 Creep(30min): +/-0.02%F.S Zero balance: +/-1%F.S TCO: +/-0.02%F.S/10¿¼C TC SPAN: +/-0.02%F.S/10¿¼C Input resistance: 400+/-10Ñ+(ZSF);750+/-20Ñ+(ZSFY) Output resistance: 352+/-3Ñ+(ZSF); 702+/-7Ñ+(ZSFY) Insulation resistance í+5000MÑ+ Operating Temp Range: -30~+70¿¼C Safe load limit: 150%F.S Over load limit: 250%F.S Recommend excitation : 10~12V DC Maximum excitation : 15V DC Protection class: IP68 Material: Alloy Steel (-A); Stainless Steel(-SS)
