Solid state relay Ac control ac Dc control dc Dc control ac Voltage-controlled regulator Resistance regulator
HP-W series Digital Timer Relay features: 1) 4 digit bright LED display, high accuracy: 0.5%FS 2) Power fail memory function 3) Auto cycle timing and delay output 4) 3 timing units, hour, minute and second 5) dimension: 48*48, 96*48, 72*72 6) timing range: 0.01S---999.9H 7) Power supply: 110/220V AC (48*48, 110V should be special ordered). 48*48,72*72,96*48 mm can be choosed, one product in one standard paper box.
ENVIRONMENTAL CONDETIONS: Temperature Range: -55~+85 C Relative Humidity: Up to 98% at +40 C Atmospheric pressure: 86kPa~106kPa, Low pressure 4 kPa Vibration: 10~2000Hz, 196 m/s2 Shock: 735m/s2 Acceleration: 490 m/s2. TECHNICAL REQUIREMENTS: Rated Voltage: 12VDC, 18VDC, 24VDC, 27VDC Insulation Resistance: 1000Mohm Dieletric Withstanding Voltage: (RMS/50Hz) 500V Contact Resistance: 0.1ohm Rated Load: 2A28VDC, 4A28VDC Life: 1x105: 1x105 / 2x104 Contact Form: 2C(DPDT); Time Delay: 0.05~500s(Nonadjustable) Outline Dimensions: 20.5 x 10.5 x 15mm Weight: 13g .
Temperature Range: -55 ~ +85C Relative Humidity: 98% at +40C Atmospheric Pressure:86~106kPa,Low pressure 4.4kPa Shock: 490m/s2 Vibration: 10~500Hz,98m/s2 Liner Acceleration: 245 m/s2.
ENVIRONMENTAL CONDITIONS: Temperature Range: -55 ~ +85C Relative Humidity: 98% at +40C Atmospheric Pressure: 86~106kPa, Low pressure 4.4kPa Shock: 117.6m/s2 Vibration: 500Hz,58.8m/s2 Liner Acceleration: 147 m/s2. TECHNICAL DATA: Contact Arrangement: 6 Form C (6PDT) Coil Voltage: 12~27VDC Coil Dissipation: 2.5W Insulation Resistance: 500Mohms Dielectric Withstanding Voltage (RMS/50Hz): 500Vr.m.s. Contact Rresistance: 0.05ohms Operate Time: 8ms Release Time: 4ms; Contact Ratings: 2A27VDC Resistive Electrical Life: 1 x10 5 Operations Leakage Rate: 1 x 10 0 Pa.cm3 /s Dimensions: + 31 x 34 mm Weight: 75g Approved by Standards: QZJ840617 .
CONTACT RATINGS: Contact Arrangement: 1 Form A (SPST-NO) Max. Switching Power: 1200VA / 300W Max. Switching Voltage: 120VAC / 30VDC Max. Switching Current: 10A Contact Resistance: 100mOHMS Initial Contact Resistance: 100mOHMS Rating Load: 5A250VAC,30VDC Contact Material: Ag-CdO. TECHNICAL REQUIREMENTS: Coil Source:DC Coil Dissipation:1H1:0.45W; 1H1L:0.2W Insulation Resistance:100MOHMS Dielectric Withstanding Voltage (RMS/50Hz) 750VAC(between contacts) 3000VAC(between coil and contacts) Electrical Life:1x10 5 Operations Mechanical Life:1x10 7 Operations Contact Form:1A(SPST) Operate Time:10ms Release Time:2ms Outline dimensions:18.2mm x 10.5mm x 15mm Weight:9g Approved standard:UL,CUL(E151736),TUV,CQC. ENVIRONMEN , TAL CONDITIONS: Temperature Range:-40~+85C Relative Humidity:Up to 45~85% at +20C Atmospheric Pressure:86~106kPa Vibration:10~55Hz Dual Amplitude 1.5mm Shock:98m/s2 Operating Position:Optional .
Model t200a (250aac, 500vac, ac/dc current) can be used to test many types of relays, including high burden relay and ct. Operation is easy, no much training is required. High power current source for high burden relay test Capable of testing differential relay with two independent current sources Capable of testing directional relay with adjustable phase angle In-built ammeter and voltmteter 120s output time at 250a Rotating mouse control and quick control buttons Large lcd display Many ready test modules for automatic test applications (secondary injection test set, relay tester, single phase relay test set, universal tester)
Model s40a (3*40a, 3*150v) has large lcd display and panel control facilities. No external pc is required. It can easily test many types of relays, including distance relay, df/dt relay. The rotating mouse and quick touch buttons make the operation very easy. 3*40a, 3*150v Additional 200ma ac current source Aux dc (24v, 110v, 220v) 4 binary inputs, 1 binary output Locally with color lcd (universal relay tester, relay test equipment, 3 phase relay test set, secondary injection test system)
A reed switch consists of two ferromagnetic and specially shaped contact blades (reeds) positioned in a hermetically glass tube with a gap between them and in a protective atmosphere. The plated contact surfaces are isolated from the outside environment, which protects the contacts from contamination. Reed switches are available as form a (normally open) and form c (changeover), and are operated using a magnetic field generated by either a permanent magnet or current carrying coil. The features that make the reed switch a valuable tool include compact size, low weight, quick response time, long life and low cost. Some common applications are: reed relays, automotive sensors, robotics sensors, security sensors and toys and games. They are also available in moulded packages affording protection from damage and in surface mount styles. 8x6x5, 1#
A reed relay consists of a reed switch and coil fitting into a housing which could be plastic, metal or moulded. Reed relays generally have a faster response time than electro-mechanical relays, lower coil consumption and are smaller in size. Furthermore, the switch is sealed in a dry inert atmosphere preventing the ingress of contaminants. 14"x9"x12" 12"x10"x6" 4"x2 1/2"x1 3/4".
Solid state relays(ssr) manufactured by the comus group of companies are sold around the world. The sign, with no moving parts, means that solid state relays have an almost unlimited life expectancy compared with electromechanical relays. With no mechanical parts there is no contact bounce, no sparks and no mechanical wear making solid state relays the natural choice in working environments where these features are important. 14"x9"x12" 10"x10"x6" 4"x2 12"x 1 3/4"
Flasher Type :- 2 pin Flash Rate :- 85 c/m+/- 10c/m % Current on time :- 35% to 60% Measuring Condition Vtg. :- 12.8 VDC Rated Load :- 10Wx2+2 W Temp. -20deg to +55deg C Circuit Resist.:- 0.1 ohm+/- 0.01 ohm Starting Time :- 1.5 sec. max Indication of a bulb Failure :- Remains lit at 10 W Failure Durability Test :- 200H of working cycle consisting of 15 secON & 15 sec OFF Voltage Drop :- 40mV MAX. Terminal Shape :- Plug in Applications :- Turn Signal Indicator.
Diemensions(LxWxH):-22x16x24 Contact Form:- 1A,1C Contact Material:- Ag Alloy Rated Switching Current:- 10A,20A,30A/12V DC Max Switching Voltage :-28 VDC Max. Switching Current :- 100A Switching Power Max.:- 840 W Contact Resist.(initial)mohm:- 100 Coil Vtg:- 12V,24V Coil Power Consumption :-1.3W Dielectric Strength between Open Contact :- 500 AC/1min between Coil & Contact :- 1000 VAC/1min Insulation Resist.(at 500VDC):- 10 Life Expectancy (ops.) Electrical :-1x10'5 Mechanical:- 1x10'7 Operating Temp. Range :- -30deg to +105deg C Operate Time :- 10 ms Release Time :-7ms Terminal Shape :-Plug in Applications :- Head lamp,Control Starer Motors,Defogger, Radiator Fan, A/C Controls.
Contact Form :- 1A,1C Contact Material :-Ag Alloy Contact Ratings:- 5A,10 A/12 VDC,24VDC 10A/240 VAC Max Switching Voltage :- 28VDC/240 VAC Max Switching Current:- 10 A Switching Power Max.120 W,2400 VA Contact Resist.(initial) mohm. :-50 Coil Voltage :- 6V-24 V Coil Power Consumption :- 0.69 W Dielectric Strength Between Open Contact :- 750VAC/1 min Between Coil & Contact:- 750VAC/1 min Insulation Resist.Mohm(at 500V DC) :-100 Life Expectancy (ops) Electrical:- 1x10'5 Mechanical :- 1x10'7 Operating Temp. Range :- -30 deg to + 85 deg C Operate Time (at nominal voltage) :- 15 ms Release Time( at nominal voltage) :- 10 ms Terminal Shape :- P.C.B. Applications :- General Controller motor load, Internal Wipers, Door Lock , Window Lifter, Alarm System.
Contact Form :- 1A,1C Contact Material :- Ag Alloy Contact Ratings :- 10A,15A/28VDC 10A,15A/125 VAC Max Switching Voltage :- 28 VDC/125V VAC Max Switching Current:- 15 A Switching Power Max.:-280W/1250VA Contact Resist. (initial) mohm.:- 100 Coil Voltage :- 6v-48 v Coil Power Consumption :- 0.45W Dielectric Strength Between Open Contact :- 750 VAC/1 min Between Coil &Contact :- 1500 VAC/1min Insulation Resist. Mohm (at 500 vdc) :-100 Life Expectancy ( ops) Electrical:- 1x10'5 Mechanical :- 1x10'7 Operating Temp.Range :- -40 deg to +70 deg C Operate Time (at nominal voltage):- 15 ms Release Time(at nominal voltage):- 10 ms. Terminal Shape :- P.C..B Applications :- Boiler Controller , Air Conditioner , UPS Office Automation ,PLC SecuritySystem, Timer.
Starter relay Starter relay-12v 100a, power relays 12 & 24v form 10a to 70a, flasher relays 22w to 110w, Micro relays-12v& 24v contact rating 5a to 30a.
Features: Small size, light weight. Low price reliable quality. Pc board mounting. Suitable for household electrical appliance, automation system, electronic equipment, instrument, meter, telecommunication facilities and remote control facilities.
High switching performance with minimal energy consumption High sensitivity, low power consumption, easy to install. Small size, light weight High vibration and shock resistance. The contact terminal can be modified as per customer specification. Oem/odm acceptable. Miniature size
This unit sense current for over current or earth fault protections, 1kg, height 105mm base 102 * 51mm
1) under/over voltage monitoring relay 2) motor protection overload relay 3) electronic overload relay
